Surrey · England

Bath Re-enamelling in Tilford Reeds

Local bath re-enamelling for Tilford Reeds: a fixed quote from photos, a tidy visit and a one-year guarantee.

  • Resurfacing from £350
  • Chips and rust in more than one place
  • A roll-top that is seen better days
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling near Tilford Reeds

Keeping it looking good

Aftercare is simple:

  • Never use suction bath mats
  • Do not leave bottles, razors or sponges standing on the surface
  • Get any chip repaired quickly
  • Dry the bath after use to stop limescale

Wipe the bath dry after use where you can, and rinse away any product left on the surface.

Do not try to scrub a worn bath back to shine. It removes more of the surface.

Bath re-enamelling in Tilford Reeds, done in place

Most baths are re-enamelled in a day, and you can use the bath the day after. Nothing is disconnected or removed. We work on acrylic baths, cast iron baths and pressed steel baths, and common reasons people get in touch are lots of chips and rust spots and a roll-top that’s seen better days.

Every repair is covered by a one-year guarantee, wherever you are in Surrey.

Before and after: an old basin refinished to bright white
Location
Tilford Reeds (GU10)
County
Surrey
Warranty
A year, on every repair
Quotes
From £350. Free, fixed price from pictures
Telephone
0345 017 0787
Updated
23 October 2026

DIY kit or professional repair?

We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.

The process

From the moment we arrive, we keep the work contained to the one room. Surfaces nearby are masked off, the job takes a full day, depending on what we find, and we finish with a tidy-up and a look at the finished work together.

  1. First we look the bath over and confirm the finish.
  2. Taps, tiles and the floor are masked off.
  3. We degrease the bath, fix any damage and key the surface.
  4. Primer and finish coats are applied.
  5. We remove the masking, tidy up and give you the curing time.

Preparing for the visit

  • Avoid using the area for a few hours before we arrive
  • Keep a parking space free if you can
  • Keep children and pets away from the room on the day

How to get a price

We price from pictures so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.

Send pictures for a quote

Related advice

What your bath is made of matters

Roll-top and period baths

We can resurface a roll-top inside and out, with the outside refinished as well.

Acrylic

Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported.

How we price bath re-enamelling

Resurfacing from £350. You won’t pay by the hour. The price is based on:

  • How many items we do on one visit
  • How easy the damage is to reach
  • What the surface is made of
  • What kind of damage it is

There are no surprise extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.

Send pictures for a quote

A couple of clear pictures is all it takes. It helps if you send:

  • The postcode, so we can plan the visit
  • Something in shot to show the size
  • A wider photo showing the entire bath
  • What it’s made of, if you know

Pricing is simple: snap the damage close up and then the entire item, send them over with your postcode, and we will reply with a fixed quote. There is no charge for the quote and no obligation.

Landlord and trade work in Tilford Reeds

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.

Hospitality businesses can’t afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.

Should you replace it?

Replacing a bath usually involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and typically one day, and the bath can be used the day after. Prices start from £350. The price reflects the work involved, not your postcode. The full price is agreed before booking.

What you get with us

  • No extra charge for your area
  • Generally one visit, start to finish
  • We come to you, anywhere in the UK
  • CHAS, Constructionline and SafeContractor accredited

See our full price list or bath cost comparison.

Tilford Reeds questions

Can you quote from pictures?

Yes, almost always. Clear pictures let us give you a fixed price without visiting.

Is there any odour?

There may be a mild smell during the work that clears as it cures.

What if the damage is worse than the photos show?

We’ll show you and explain before doing anything extra. You won’t be charged for anything you haven’t agreed.

Are you a vetted contractor?

We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

Which areas do you work in?

The entire UK, including all of Surrey. Just include your postcode and we will offer you dates.

How quickly can you book me in?

Your quote comes with available dates. Tell us if you need it done quickly.

Do you work for landlords and businesses?

Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses.

Can I add another job to the visit?

Yes. Combining jobs on one visit brings the cost down. Include photos of each item.

What we can’t put right

Before booking, it’s worth knowing the limits:

  • A bath that’s rusted through
  • Acrylic that moves when you stand in it
  • A metal bath with a through crack

Send us pictures and we will tell you honestly before you book.

Materials we repair

  • Basins & shower trays
  • Cast iron baths
  • Acrylic baths
  • Victorian roll-tops
  • Pressed steel baths

About Tilford Reeds

Tilford Reeds is about 2 miles south-east of Farnham, in Surrey. We visit homes and businesses in Tilford Reeds and the surrounding area, so you do not need to take anything anywhere. Tilford Reeds is one of 395 places in Surrey we cover. Our nearest city page is London, about 36 miles away.

We work across GU10 and the streets around it. We also travel to Tilford (1 mile north-east), Tilford Common (1 mile south-east), Millbridge (1 mile south-west), Lower Bourne (1 mile north-west) and Shortfield Common (2 miles west). Further out, we also cover Guildford (9 miles north-east), Woking (12 miles north-east), Camberley (11 miles north), Frimley (9 miles north), Haslemere (7 miles south) and Cranleigh (13 miles east).

Local landmarks in Tilford Reeds

Typical jobs here are in homes near Church of All Saints, Barley Mow pub and Moor Park and the streets around them. You will also find All Saints CofE Aided Infant School (0.5 miles east), South Farnham School (2.1 miles north-west) and Edgeborough School (1.3 miles west). For rail, the closest station is Farnham station, about 2.3 miles north-west. Further afield, we also cover the area around Farnham Castle (3 miles north-west) and Museum of Farnham (2.7 miles north-west). For a walk, there’s Upper Lake and Farnham Heath.

Map of Tilford Reeds © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.