Surrey · England
Bath Re-enamelling for Tilford Common homes
Bath re-enamelling across Tilford Common and nearby, done in a single visit in most cases.
- Resurfacing from £350
- Staining under the taps and around the waste
- A dull, rough surface that won’t come clean
When a repair isn’t the answer
A repair isn’t right for every job, for example:
- Anything hidden under an old coating, until we remove it
- An acrylic bath that flexes badly underfoot
- Plumbing leaks, which need a plumber
If in doubt, send photos and we will say what we think.
Surfaces we repair
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
- Acrylic baths
About our bath re-enamelling in Tilford Common
The bath stays where it is, so your taps, tiles and plumbing are left alone. Most baths are done in one visit, with the bath ready to use the following day. We work on acrylic baths, cast iron baths and pressed steel baths, and common reasons people get in touch are an outdated colour you’d like to change and a roll-top that’s seen better days.
You are covered after we leave: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.
- Location
- Tilford Common (GU10)
- County
- Surrey
- Warranty
- One year on every repair
- Price
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
DIY repairs versus a professional job
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is generally the cheaper route.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
The process
We begin by going over the job with you, so there are no surprises. Next, we cover and mask everything nearby and the work begins. Allow most of the day, and we’ll keep you posted as we go.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Let us know about parking or access
- Keep children and pets away from the room on the day
- Have somewhere for us to park nearby if possible
Ask for a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed price the same day in most cases.
Advice
Covering Tilford Common
Tilford Common is about 3 miles south-east of Farnham, in Surrey. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. We work in all 395 towns and villages across Surrey. Our jobs stretch from Tilford Common to London (about 36 miles away).
All of GU10 is within our area. Neighbouring places we cover include Tilford Reeds (1 mile north-west), Tilford (1 mile north), Rushmoor (1 mile south), Charleshill (2 miles north-east) and Millbridge (2 miles west). Further out, we also cover Guildford (9 miles north-east), Woking (12 miles north-east), Camberley (11 miles north), Farnham (3 miles north-west), Frimley (10 miles north) and Haslemere (6 miles south).
Local landmarks in Tilford Common
Our clients here include homes close to Thundry Meadows, Church of All Saints and The Duke of Cambridge pub, among other places. The nearest railway station is Farnham station, about 3.2 miles north-west of the centre. A little further out are Milford Hospital (5.4 miles east) and Farnham Castle (3.9 miles north-west). Open spaces near Tilford Common include Culverswell Hill and Upper Lake.
Towns and villages near Tilford Common
More services for Tilford Common
Materials and what they mean for the repair
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Do you need bath re-enamelling in Tilford Common?
Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.
Contact us if you’ve noticed:
- A bath in a colour that no longer suits
- Enamel that is lost its shine and feels rough
- A peeling or bubbling previous coating
- Staining under the taps and around the waste
What your quote should include
- Whether they match the colour on site
- How changes to the job are handled
- If travel is included in the price
- What aftercare is recommended
Tilford Common questions
Can you resurface a pink bath in white?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
What does bath re-enamelling cost?
Resurfacing from £350. Because every job differs, we price from pictures. You will get a fixed figure before booking.
Will the bath be moved?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as householders across Surrey.
I’m a tenant. Can you help?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
Will there be a smell?
Some materials have a smell while they’re applied, which is why we ventilate. It fades as everything cures.
Will the price change on the day?
The price is fixed for what the photos show. If there is more, we will tell you before starting.
Can I get a quote without a visit?
Usually, yes. Clear photos let us give you a fixed price without visiting.
Prices and what affects them
Resurfacing from £350. Prices are worked out job by job, from your pictures. What matters most is:
- The colour and finish to match
- Doing more than one item at once
- What kind of damage it is
- What the surface is made of
There are no surprise extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Send photos for a quote
Photographing the damage takes a minute. Try to send:
- Details of any past repairs
- What it’s made of, if you know
- A coin or ruler next to the damage for scale
- Daylight if possible, and no flash reflection
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.
Landlord and trade work in Tilford Common
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We will fit around changeovers where we can.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Aftercare tips
How the surface is treated afterwards matters. Here’s what we suggest:
- Dry the bath after use to stop limescale
- Use washing-up liquid and a soft cloth
- Fix dripping taps quickly
- Do not let dyes or oils sit on the finish
Dry the bath after use if possible, and rinse away any product left on the surface.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. It’s simpler to resurface before they spread.
About our accreditations · Every repair comes with a one-year guarantee.
