Wiltshire · England
Bath Re-enamelling in Tilshead
Full bath re-enamelling and resurfacing for homes and businesses in Tilshead and across Wiltshire. Send pictures for a free, fixed quote.
- Resurfacing from £350
- Chips and rust in more than one place
- Worn patches where water runs and sits
Bath re-enamelling at your home in Tilshead
A re-enamelled bath looks and feels like a new one, but without the cost and upheaval of a refit. It suits anyone happy with the bathroom apart from the bath. Whether it’s a peeling or bubbling previous coating and thin, worn enamel in places, we can help, on basins & shower trays, pressed steel baths and cast iron baths alike.
A one-year guarantee comes as standard, so you’re covered after the visit.
- Area
- Tilshead (SP3)
- Area hub
- Wiltshire
- Cover
- A year, on every repair
- Quote
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Should I try a DIY kit first?
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.
If you are set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and don’t use it until it has fully cured. If it fails, we can still put it right.
What affects the price in Tilshead
Prices start from £350. Quotes are free and the price is fixed. What we take into account:
- How many areas need work
- The colour and finish to match
- How many items we do on one visit
- Whether it’s a chip, crack, burn or wear
The price reflects the work involved, not where you live. The full price is agreed before booking.
Getting a price from photos
A couple of clear pictures is all it takes. Try to include:
- A coin or ruler next to the damage for scale
- A close-up of the damage, in focus
- Details of any past repairs
- Where you are, by postcode
For a price in Tilshead, pictures are the quickest way: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Common questions in Tilshead
Can you re-enamel a roll-top bath?
Yes. We can do the inside and outside.
When can you do it?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
Does someone need to be in?
We need someone to let us in. After that, you can carry on with your day.
I rent my home. Can I book you?
We are happy to deal with the tenant, landlord or agent. Just make sure the landlord agrees.
Do you need to take the bath out?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
Can you fix a peeling bath coating?
Yes. Removing the old finish takes extra time, which we include in the price.
How much does bath re-enamelling cost in Tilshead?
Resurfacing from £350. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
Do you cover Tilshead?
Yes. We work across the UK and travel to Tilshead and the rest of Wiltshire. Send us photos for a fixed quote, or call 0345 017 0787.
Common problems we fix in Tilshead
A dull surface stains and holds dirt, and scrubbing it wears it down further. That’s the point where re-enamelling makes sense.
You may need us if you’ve spotted any of these:
- Brown or grey marks that don’t clean off
- A peeling or bubbling previous coating
- A bath in a colour that no longer suits
- A period or roll-top bath worth keeping
What your quote should include
- How the room is protected while they work
- What happens if the damage is worse than the photos show
- The length of the guarantee and what it covers
- Aftercare advice
How the visit works
We turn up at the time we agreed with you and looks over the damage before anything else. The floor and nearby surfaces are covered before we open a single tin. Most visits take most of the day, and we leave the room as we found it.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s usually ready the following day.
Getting ready for the visit
- Mention any earlier repairs or resurfacing
- Keep children and pets away from the room on the day
- Have somewhere for us to park nearby if possible
Getting a price
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through.
Read more
Landlord and trade work in Tilshead
We carry out planned and one-off repairs for housing associations and facilities teams in Wiltshire and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
If you manage property in Tilshead, we’ll quote for several properties at once. Just send photos for each address and we will come back with a combined price.
Tilshead and the surrounding area
Tilshead is about 8 miles south of Devizes, in Wiltshire. Whether you’re in the middle of Tilshead or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Tilshead is one of 425 places in Wiltshire where we work.
We cover every part of SP3. Streets in the area include High Street, Back Lane and Candown Road. Neighbouring places we cover include Elston (3 miles south-east), West Lavington (3 miles north-west), Littleton Panell (4 miles north-west), Market Lavington (4 miles north) and Fiddington Sands (4 miles north). Larger places within reach include Salisbury (13 miles south-east), Trowbridge (13 miles north-west), Calne (15 miles north), Devizes (8 miles north), Westbury (10 miles west) and Melksham (12 miles north-west).
Near you in Tilshead
Typical jobs here are in homes near St Thomas à Becket Church of England Aided Primary School and Church of St Thomas A Becket, among other places. A little further out are Market Lavington Museum (4 miles north). Open spaces near Tilshead include Lavington Down.
Nearby places to Tilshead
What else we do in Tilshead
Different materials, different repairs
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
When a repair isn’t the answer
Some problems need a builder, plumber or fitter rather than us:
- A bath split right through the body
- Leaking taps or wastes (a plumber’s job)
- A bath that is rusted through
Not sure? Send pictures and we will give you a straight answer.
Surfaces we repair
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
Aftercare tips
Nothing complicated is needed, just a few sensible habits:
- Use washing-up liquid and a soft cloth
- Dry the bath after use to stop limescale
- Keep suction mats out of the bath
- Keep toiletries on a shelf rather than in the bath
A quick rinse and wipe after use helps, especially in hard water areas, so limescale cannot build up.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
About our accreditations · Every repair comes with a one-year guarantee.
