Wiltshire · England
Bath Resealing in Tilshead
Bath, shower and sink resealing with new mould-resistant silicone in Tilshead, carried out at your home and guaranteed for a year.
- Mould you cannot clean out
- An untidy old seal
- Water getting behind the bath or tray
Common problems we fix in Tilshead
Sealant splits when the bath or tray moves, often because it was sealed while the bath was empty.
You may need us if you’ve spotted:
- Gaps by the taps
- An untidy old seal
- Leaks at the edges
- Black mould in the sealant
What your quote should include
- Whether cleaning and preparation are in the price
- Whether the colour is mixed to match
- How long the guarantee is and what it covers
- Whether there are any call-out or travel charges
Bath resealing in Tilshead without replacing anything
A good reseal is all about preparation: every bit of old silicone out, mould treated, the joint clean and dry. Then the fresh sealant goes on, in a neat, continuous bead. We are often asked to fix black mould in the sealant and missing sealant behind the taps, across baths, kitchen worktops & sinks and basins & vanity units.
We guarantee the work for a year. If there’s a problem with the repair within the year, we return and sort it.
- Area
- Tilshead (SP3)
- County
- Wiltshire
- Guarantee
- A year, on every repair
- Quotes
- Free, fixed quote from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
How it works
Here’s how a visit usually runs: we arrive on time, protect everything around the work area, do the job and clear up. Allow a couple of hours from start to finish. Before we go, we will explain how long to leave it and what to avoid for the first few days.
- All the old sealant is cut out and removed.
- Next we clean the joint and deal with mould.
- We make sure the joint is completely dry.
- Baths are filled with water first, so the joint is at its widest.
- New mould-resistant silicone goes on and is tooled to a neat finish, including around the taps.
Getting ready for the visit
- Open a window if you can
- Have somewhere for us to park nearby if possible
- Let us know which floor the room is on
Getting a price
To get a price, send a couple of photos using our quote form or ring us. We will tell you honestly whether it can be repaired.
Advice
Why it’s worth resealing in Tilshead
Resealing is routine maintenance. Leaving split or mouldy sealant can let water reach the walls and floor, which costs far more to put right. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Why book with us
- Honest advice, even when it means no job
- Dust sheets down, tidy finish
- We come to you, anywhere in the UK
- Free fixed quotes from pictures
Read our prices page.
Repairs by material
Sinks and worktops
We reseal basins, vanity tops and kitchen worktops, with the joint fully dried first.
Baths
Baths are resealed with water in them, so the joint is at its widest.
Questions from Tilshead
Will there be a smell?
Some materials have a smell while they’re applied. It fades as everything cures.
Why does mould come back so fast?
Mould needs moisture. Run the fan, dry the joints and the new seal stays cleaner for longer.
Do you come to Tilshead?
Yes. We work across the UK and travel to Tilshead and the rest of Wiltshire. Send pictures and we will quote, or call 0345 017 0787.
Why does my sealant keep splitting?
The bath or tray is probably flexing. Persistent splitting can mean the support needs attention.
Is my repair covered?
All our work carries our one-year guarantee. We will explain what it covers when we quote.
What do you need from me?
Photos of the damage, a photo of the whole bath or shower and your postcode. After that, we just agree a date.
Is repairing better than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we will tell you.
Can you quote from photos?
Nearly always. We only ask to see it in person if the pictures cannot show what we need.
Tilshead and the surrounding area
Tilshead is about 8 miles south of Devizes, in Wiltshire. Across the SP3 area, we come to you. Tilshead is one of 425 towns and villages in Wiltshire we cover.
Jobs in SP3 work the same way as everywhere else we cover. From High Street, Back Lane and Candown Road or anywhere nearby, we can come to you. Close by, we cover Elston (3 miles south-east), West Lavington (3 miles north-west), Littleton Panell (4 miles north-west), Market Lavington (4 miles north) and Fiddington Sands (4 miles north). Larger places within reach include Salisbury (13 miles south-east), Trowbridge (13 miles north-west), Calne (15 miles north), Devizes (8 miles north), Westbury (10 miles west) and Melksham (12 miles north-west).
Near you in Tilshead
Typical jobs here are in homes near St Thomas à Becket Church of England Aided Primary School and Church of St Thomas A Becket, among other places. Other landmarks nearby include Market Lavington Museum (4 miles north). The countryside around Tilshead includes Lavington Down.
Landlords, agents and businesses in Tilshead
Landlords, letting agents and housing providers in Tilshead use us as well as householders. Repairing between tenancies keeps void periods short, and it typically costs far less than a refit.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
What affects the price in Tilshead
We give every job a fixed quote from photos. These are the things that affect it:
- Whether old repairs or coatings need taking off
- The size and number of damaged areas
- Where the damage is and how we get to it
- The material
Rather than charging by the hour, we price the whole job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
Send photos for a quote
Before you send photos, these tips help us give you a firm price:
- A coin beside the damage so we can judge size
- Whether it’s been repaired or coated before
- The material, if you know it
- One picture of the entire bath or shower
A quote takes minutes to ask for: take one close-up and one wider shot of the bath or shower, add your postcode and send them to us. You’ll get a fixed quote, not an estimate.
Should I try a DIY kit first?
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
When a repair isn’t the answer
We’ll always be straight with you, so here’s what a repair won’t do:
- Very wide gaps that need a trim
- A flexing bath
- Hidden water damage
If in doubt, send pictures and we’ll say what we think.
Materials we repair
- Baths
- Shower trays & enclosures
- Wet rooms
- Kitchen worktops & sinks
- Basins & vanity units
Towns and villages near Tilshead
Other services in Tilshead
About our accreditations · Every repair comes with a one-year guarantee.
