Essex · England
Bath Re-enamelling for Tolleshunt D'Arcy homes
Bath re-enamelling in Tolleshunt D'Arcy without the cost of replacing. Send us pictures for a fixed quote, then book a visit.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- A coating lifting around the plughole
Common questions in Tolleshunt D'Arcy
Do I have to be there?
Yes. We need access to the room while we work, at a time that suits you.
How quickly can you book me in?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
Is there any odour?
There may be a mild smell during the work, which fades afterwards.
Will it make a mess?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
How long does re-enamelling take?
One day for most baths and can be used the day after. We give you timings with the quote.
Is a repair better than a new one?
In most cases, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.
Will there be fumes?
A little, during the work. We set up ventilation and the smell fades as it cures.
About our bath re-enamelling in Tolleshunt D'Arcy
Most baths are re-enamelled in a day, and you can use the bath the next day. Nothing is disconnected or removed. We regularly repair basins & shower trays, pressed steel baths and acrylic baths, and common reasons people contact us are a roll-top that’s seen better days and a peeling or bubbling previous coating.
All of our repairs are guaranteed for twelve months. We return to put right any problem with the work.
- Location
- Tolleshunt D'Arcy (CM9)
- County
- Essex
- Warranty
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
When a repair isn’t the answer
It helps to know what we can’t do:
- A bath that is rusted through
- A poorly supported acrylic bath, until it’s firmed up
- A metal bath with a through crack
If in doubt, send pictures and we will say what we think before booking.
Materials we repair
- Basins & shower trays
- Acrylic baths
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
About Tolleshunt D'Arcy
Tolleshunt D'Arcy is about 6 miles north-east of Maldon, in Essex. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. We work in 644 places across Essex. We work right across the region, from Tolleshunt D'Arcy to London (43 miles away).
All of CM9 is covered. That includes homes on Station Road, South Street and North Street. Other places close to Tolleshunt D'Arcy include Oxley Green (2 miles north-west), Tolleshunt Major (2 miles west), Tolleshunt Knights (2 miles north-west), Little Totham (2 miles west) and Goldhanger (2 miles south-west). Larger places within reach include Colchester (9 miles north-east), Chelmsford (13 miles west), Braintree (13 miles north-west), Clacton-on-Sea (15 miles east), Maldon (6 miles south-west) and Rayleigh (15 miles south-west).
What’s near Tolleshunt D'Arcy
In Tolleshunt D'Arcy, that means homes near Church of St Nicholas, Tolleshunt D'Arcy St Nicholas CofE VA Primary School and Queen's Head pub, among other places. Other landmarks nearby include Maldon & District Agricultural & Domestic Museum (2.3 miles south-west). Not far away are Oxley Meadow.
Different materials, different repairs
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. The bath needs to be firm and well supported.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Do you need bath re-enamelling in Tolleshunt D'Arcy?
Enamel wears gradually. Years of cleaning, hard water and hot baths dull the surface, starting where water runs and sits.
The things customers typically mention when they call are:
- Chips and rust in more than one place
- A roll-top that’s seen better days
- Enamel that is lost its shine and feels rough
- Wear marks under the taps
Comparing quotes
- If travel is included in the price
- How changes to the job are handled
- A fixed quote, and whether VAT is included
- How your room will be protected
Also near Tolleshunt D'Arcy
What else we do in Tolleshunt D'Arcy
Repair or replace: which is better?
Replacement only makes sense in a few cases: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing typically wins. Resurfacing from £350, with every job priced individually. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
Why book with us
- Usually one visit, start to finish
- Straight answers about what a repair can do
- One price list for the entire UK
- We come to you, anywhere in the UK
Take a look at our full price list or resurfacing vs replacement cost guide.
How we price bath re-enamelling
Prices start from £350. Quotes are free and the price is fixed. What we look at:
- How easy the damage is to reach
- What kind of damage it is
- Doing more than one item at once
- The material and finish
Our prices are the same across the UK, with no extra for Tolleshunt D'Arcy. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Getting a price from photos
Good photos mean an accurate price. Here’s what helps:
- Details of any past repairs
- A picture taken from further back
- Your postcode, so we can check dates
- Daylight if possible, and no flash reflection
You do not need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.
Keeping it looking good
How the surface is treated afterwards matters. Here’s what we suggest:
- A dripping tap should be fixed promptly
- Respect the curing time we give you
- Rinse off hair dye, oils and bath bombs right away
- Wipe the bath dry after use in hard water areas
Dry the bath after use if possible, particularly with hard water, and rinse away any product left on the surface.
Rust spots on a worn bath get worse with time and make the job bigger. Resurfacing before they spread keeps it simpler.
DIY kit or professional repair?
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and don’t use it until it has fully cured. If it fails, we can still put it right.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
What we do, step by step
The work is clean and fairly quiet, so you can stay at home while we’re there. Protection goes down first, then the job itself takes a full day. Before we leave, we explain the curing time and the aftercare.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Let us know which floor the room is on
- Keep a parking space free if you can
- Make sure the area is dry
How to get a price
Most customers in Tolleshunt D'Arcy get their price from pictures. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
