Essex · England

Bath Re-enamelling for Little Totham homes

Local bath re-enamelling for Little Totham: a fixed quote from photos, a tidy visit and a one-year guarantee.

  • Resurfacing from £350
  • An original cast iron bath that needs restoring
  • Enamel that is lost its shine and feels rough
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath re-enamelling in Little Totham

What affects the price in Little Totham

Prices start from £350. A fixed quote means you know the cost before you book. We look at:

  • How much damage there is
  • Whether it’s a chip, crack, burn or wear
  • Previous DIY repairs that have to come out
  • What the surface is made of

We do not add extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.

How to get a fixed quote

We price nearly every job from pictures. This is what we need:

  • A close-up of the damage, in focus
  • A coin or ruler next to the damage for scale
  • The material, if you know it
  • A photo taken from further back

You don’t need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.

How we handle bath re-enamelling in Little Totham

Resurfacing renews the whole surface of the bath without a refit. It suits baths that are dull, stained, rough or chipped all over. Common call-outs are for worn patches where water runs and sits and lots of chips and rust spots, in Victorian roll-tops, pressed steel baths and cast iron baths.

You get a one-year guarantee, the same in Little Totham as everywhere else we work.

Where
Little Totham (CM9)
Area hub
Essex
Warranty
One year on every repair
Price
From £350. Fixed and free, based on photos
Call
0345 017 0787
Page updated
23 October 2026
Technician in a mask working on a freestanding roll-top bath

How the visit works

Nothing needs to be moved out of the room. Everything we use comes in the van with us, put protection down and start once you are happy with the plan. It usually takes the best part of a day, and you’re welcome to carry on with your day while we work.

  1. First we look the bath over and confirm the finish.
  2. Everything around the bath is masked and covered.
  3. The bath is degreased, repaired and keyed.
  4. Primer and finish coats are applied.
  5. The masking comes off, we tidy up and tell you when it can be used.

Before we arrive

  • Clear the area around the damage
  • Let us know if it has been repaired before
  • Point us to the nearest place to park

How to get a price

A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them over. What comes back is a fixed price, not a guess.

Get a free quote

Advice

Little Totham: your questions answered

When can you do it?

We’ll give you dates with your quote. If it’s urgent, say so and we’ll do what we can.

Do you do work for letting agents?

Yes. We work for landlords, agents, builders and businesses as well as householders in Little Totham.

Can pets and children be at home?

On the day, the room should be kept clear of pets and children, so the repair is not disturbed while it cures.

Can you price it without visiting?

Yes, almost always. Clear photos let us give you a fixed price without visiting.

I’m a tenant. Can you help?

Of course. Check with your landlord; we can send the quote to them too.

Is repairing better than replacing?

Typically, if the item is otherwise sound. A repair avoids removal and making good. If replacing would be better, we’ll say so.

Do you hold any accreditations?

Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

Is it messy?

No. The work area is masked and covered, and we take our waste away with us.

For landlords and businesses

Housing associations and facilities teams use us for planned and reactive repairs in Essex and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.

We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.

Should I try a DIY kit first?

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.

Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.

Our work in Little Totham

Little Totham is about 4 miles north-east of Maldon, in Essex. Our repair technicians come to customers in Little Totham and nearby villages, so nothing has to leave your home. Little Totham is one of 644 places in Essex where we work. Our nearest city page is London, about 41 miles away.

Every address in CM9 is covered. From The Street, Sawyer's Road and Bakers Lane or anywhere nearby, we can come to you. If you’re just outside Little Totham, we cover Tolleshunt Major (1 mile south-east), Totham Hill (1 mile west), Oxley Green (2 miles north-east), Goldhanger (2 miles south) and Tolleshunt Knights (2 miles north-east). We also work in nearby towns such as Colchester (10 miles north-east), Chelmsford (11 miles west), Braintree (11 miles north-west), Maldon (4 miles south-west), Rayleigh (14 miles south-west) and Witham (5 miles west).

Around Little Totham

Typical jobs here are in homes near Church of All Saints and The Swan pub, among other places. The nearest railway station is Witham station, roughly 4.8 miles north-west of the centre. Well-known places in the area include Maldon & District Agricultural & Domestic Museum (2 miles south-east). Open spaces near Little Totham include Tiptree Heath Nature Reserve.

Map of Little Totham © OpenStreetMap contributors

Materials and what they mean for the repair

Roll-top and period baths

Freestanding roll-tops can be done inside and out, and the outside can be refinished too.

Pressed steel

Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.

When we would advise against a repair

A few problems are outside what a surface repair can do:

  • A metal bath with a through crack
  • Leaks from fittings rather than the bath
  • Anything hidden under an old coating, until we remove it

If in doubt, send pictures and we will say what we think before you book.

What we work on

  • Victorian roll-tops
  • Acrylic baths
  • Cast iron baths
  • Basins & shower trays
  • Pressed steel baths

What we are called out for in Little Totham

Enamel does not fail overnight. Years of cleaning, hard water and hot baths wear the gloss away, usually first under the taps and around the waste.

Send us a photo if you notice any of these:

  • Brown or grey marks that do not clean off
  • Lots of chips and rust spots
  • Worn patches where water runs and sits
  • A coating lifting around the plughole

What to look for in a quote

  • Whether a trained technician does the job
  • Whether cleaning and preparation are in the price
  • Aftercare advice
  • How changes to the job are handled

Our hiring checklist

Looking after it afterwards

After the repair has cured, a few habits help it last:

  • Never use suction bath mats
  • Repair dripping taps early
  • Clean with a soft cloth and mild detergent
  • Don’t let dyes or oils sit on the finish

Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.

Leave a peeling coating alone. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.