Hampshire · England
Bath re-enamelling & resurfacing in Toothill, Hampshire
Our technicians come to Toothill for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- A coloured bath you want in white
- A bath that stays dull however much you clean it
Bath re-enamelling at your home in Toothill
Re-enamelling gives a worn bath a new glossy surface without taking anything out. It suits baths that are dull, stained, rough or chipped all over. Our repair technicians work on pressed steel baths, Victorian roll-tops and cast iron baths, and people most often call us about stains that won’t shift and a roll-top that’s seen better days.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Where
- Toothill (SO51)
- Area hub
- Hampshire
- Guarantee
- One year on every repair
- Price
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
What affects the price in Toothill
Prices start from £350. We charge the same across the UK, including Toothill. What changes the price is:
- How many items we do on one visit
- The type of damage
- Unusual colours or finishes
- The material
A repair usually costs much less than people expect, particularly next to the cost of replacement. Send photos and we’ll give you the exact figure.
Quotes from your pictures
The better the pictures, the more accurate the price. Here’s what helps:
- A clear, close picture of the problem area
- Daylight if possible, and no flash reflection
- The postcode, so we can plan the visit
- Any details about the material
To get a price, send a couple of photos through our quote form or call us. We’ll say straight away if a repair is the right fix.
Toothill and nearby
Toothill is about 2 miles south of Romsey, in Hampshire. Whether you are in the middle of Toothill or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. We cover all 683 towns and villages across Hampshire. You can also see our page for London, about 70 miles away.
All of SO51 is covered, from the main roads to the quietest streets. Other places close to Toothill include Ashfield (1 mile west), Upton (1 mile south), Lee (1 mile west), Rownhams (1 mile south-east) and North Baddesley (1 mile north-east). We also work in nearby towns such as Winchester (9 miles north-east), Eastleigh (5 miles east), Fareham (14 miles south-east), Totton (4 miles south-west), Chandler's Ford (4 miles north-east) and Hedge End (8 miles south-east).
Around Toothill
Typical jobs here are in homes near The Mountbatten School and Church of St John and the streets around them. For rail, the closest station is Romsey station, about 2.3 miles north-west. Other landmarks nearby include Romsey Extra (1.8 miles north-west) and King Johns House (2.4 miles north-west). Open spaces near Toothill include Emer Bog and Baddesley Common.
Common questions in Toothill
Do you cover Toothill?
Yes, we do. We send a technician to Toothill for every job, and the price is the same as everywhere else.
How long does re-enamelling last?
It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.
Can you quote from pictures?
Nearly always. If photos don’t show enough, we’ll ask for another angle.
Does the bath have to be removed?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
What happens if you find more damage?
The price is fixed for what the pictures show. Anything extra is discussed before we begin.
Is there a call-out fee?
Travel is included in the price, with the same prices everywhere we work.
What does bath re-enamelling cost?
Prices start from £350. We give a fixed price from your photos. Send a close-up of the damage and a wider photo and your postcode.
I’m a tenant. Can you help?
Of course. Ask your landlord first, and we can send them the quote if that helps.
How it works
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, protect the area, then carry out the work, which normally takes most of the day. If we find something your photos didn’t show, we will explain it before carrying on.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- Once cured, normally by the next day, the bath is ready.
How to prepare
- Open a window if you can
- Avoid using the area for a few hours before we arrive
- Tell us if there are stairs or a lift
Get a quote
There’s no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will reply with a fixed price.
Related advice
How to look after the repair
To keep it looking its best:
- Repair dripping taps early
- Have chips seen to early
- Keep suction mats out of the bath
- Use washing-up liquid and a soft cloth
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
Worn enamel only gets rougher with time, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
Can I fix it myself?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
More services for Toothill
For landlords and businesses
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
Landlords, letting agents and housing providers in Toothill use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it normally costs far less than a refit.
Do you need bath re-enamelling in Toothill?
Enamel does not fail overnight. Abrasive cleaners, limescale and years of use wear the gloss away, starting where water runs and sits.
Keep an eye out for any of the following:
- Lots of chips and rust spots
- Wear marks under the taps
- An old resurfacing that’s failing
- An outdated colour you’d like to change
What to look for in a quote
- Whether there are any call-out or travel charges
- How soon you can use it again
- What preparation is included
- What happens if they find more damage
When a repair isn’t the answer
To be straight with you, there are a few things a repair won’t fix:
- A bath split right through the body
- Leaking taps or wastes (a plumber’s job)
- Holes rusted through the metal
Not sure? Send photos and we will give you a straight answer before booking.
Surfaces we repair
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
What your bath is made of matters
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so a new finish makes them look new again.
About our accreditations · Every repair comes with a one-year guarantee.
