Hampshire · England
Bath re-enamelling & resurfacing in Ashfield, Hampshire
Bath re-enamelling across Ashfield and nearby, done in a single visit in most cases and guaranteed for a year.
- Resurfacing from £350
- Chips and rust in more than one place
- A bath in a colour that no longer suits
Bath re-enamelling in Ashfield without replacing anything
We clean, repair and prime the bath before spraying the new finish. Most of the work, and most of the durability, is in the preparation, and we take our time over it. Typical jobs include worn patches where water runs and sits and lots of chips and rust spots, in basins & shower trays, pressed steel baths and Victorian roll-tops.
Whatever the size of the job, you get the same one-year guarantee in Ashfield and across Hampshire.
- Area
- Ashfield (SO51, SO16)
- County
- Hampshire
- Cover
- One year on every repair
- Price
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Common questions in Ashfield
Can landlords book you?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses across Hampshire.
Will you leave a mess?
We protect the room with dust sheets and masking first, and we clean up when we have finished.
Can you re-enamel a roll-top bath?
Yes. Inside and out if you’d like.
How much does bath re-enamelling cost in Ashfield?
Prices start from £350. Every job gets a fixed price from your photos. Send a close-up of the damage and a wider photo and your postcode.
What do you need from me?
A close-up, a wider photo and your postcode. Then we’ll agree a date.
Do I have to be there?
We need someone to let us in. You don’t need to watch us work.
What if the damage is worse than the pictures show?
Your quote covers the damage in the pictures. If there is more, we’ll tell you before starting.
When can you do it?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
Also in Ashfield
Repairing versus replacing in Ashfield
If the bath is sound, re-enamelling is normally much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Prices start from £350. No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Why book with us
- Typically one visit, start to finish
- Colour mixed on the day to match
- Straight answers about what a repair can do
- Accredited with CHAS, Constructionline and SafeContractor
See our pricing and guide to resurfacing and replacement costs.
What bath re-enamelling costs
Prices start from £350. There’s no charge for travel to Ashfield. The price comes down to:
- Whether old repairs or coatings need taking off
- The colour and finish to match
- What the surface is made of
- How many areas need work
Set against the cost of replacement, repairing normally costs far less, because there’s no removal, plumbing or making good. The quote lists exactly what you are paying for.
How to get a fixed quote
When you take your photos, a few simple things make all the difference:
- Details of any past repairs
- Your postcode, so we can check dates
- A clear, close picture of the problem area
- One picture of the entire bath
We price from photos so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.
Landlords, agents and businesses in Ashfield
We’re used to working with agents and managing companies. Send the address, photos and access details and we will arrange it.
Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
What your bath is made of matters
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Honest limits
We won’t take on work that won’t last, so here’s what a repair cannot put right:
- Acrylic that moves when you stand in it
- Leaking taps or wastes (a plumber’s job)
- A cast iron or steel bath that is cracked right through
If in doubt, send pictures and we will say what we think before you book.
Materials we work on in Ashfield
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
Covering Ashfield
Ashfield is about 2 miles south of Romsey, in Hampshire. Book a date that suits you, and you’ll know when to expect us, so there is no waiting around. Ashfield is one of 683 places in Hampshire we cover. Our nearest city page is London, about 71 miles away.
We work across the SO51 and SO16 postcode area. From Lee Lane, Lee Church Lane and Coldharbour Lane or anywhere nearby, we can come to you. If you are just outside Ashfield, we cover Lee (1 mile west), Toothill (1 mile east), Upton (1 mile south-east), Rownhams (1 mile south-east) and Nursling (1 mile south-east). Further out, we also cover Winchester (10 miles north-east), Eastleigh (6 miles east), Fareham (14 miles south-east), Totton (3 miles south), Chandler's Ford (4 miles north-east) and Hedge End (8 miles east).
Landmarks near Ashfield
In Ashfield, that means homes near Oasis Academy Lord's Hill and Church of St Boniface. Ashfield’s nearest station is Romsey station, about 2.3 miles north. A little further out are Romsey Community Hospital (2.2 miles north) and King Johns House (2.3 miles north). For a walk, there’s Testwood Lakes.
- Other local spots include Romsey Extra (1.5 miles north-west)
The process
Arrival times are agreed in advance, so you are not left guessing. On site, it takes most of the day in most cases. We leave the room clean.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Keep pets and children out of the room while we work
- Tell us about any previous repairs or coatings
- Let us know which floor the room is on
Ask for a price
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can price the job without visiting.
Related advice
Looking after it afterwards
After the repair has cured, a few habits help it last:
- Have chips seen to early
- Don’t use the bath until it has fully cured
- Rinse off hair dye, oils and bath bombs straight away
- Fix dripping taps quickly
Treat the new finish gently at first: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Resurfacing sooner means less repair work first.
Common problems we fix in Ashfield
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. We strip what’s failing and start again.
The things clients normally mention when they call include:
- Staining under the taps and around the waste
- Thin, worn enamel in places
- A coating lifting around the plughole
- A coloured bath you want in white
What to look for in a quote
- How to look after the finish
- How soon you can use it again
- If travel is included in the price
- How long the guarantee is and what it covers
About our accreditations · Every repair comes with a one-year guarantee.
