West Sussex · England
Bath re-enamelling & resurfacing in Tower Hill, West Sussex
Full bath re-enamelling and resurfacing in Tower Hill, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- An outdated colour you’d like to change
- Enamel that is lost its shine and feels rough
Prices and what affects them
Prices start from £350. You’ll know the full cost before you book. We look at:
- How much damage there is
- The material
- Any earlier repairs that need removing first
- How many items we do on one visit
A repair typically costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
How to get a fixed price
We price nearly every job from photos. This is what we need:
- Whether it’s been repaired or coated before
- A photo taken from further back
- Daylight if possible, and no flash reflection
- A coin beside the damage so we can judge size
For a price in Tower Hill, the easiest route is photos: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
Bath re-enamelling in Tower Hill without replacing anything
Re-enamelling is a one-day job for most baths, and you can use the bath the following day. Nothing is disconnected or removed. Typical jobs include wear marks under the taps and a coloured bath you want in white, on cast iron baths, acrylic baths and pressed steel baths.
A one-year guarantee comes as standard, so you’re not left on your own once we’ve gone.
- Area
- Tower Hill (RH13)
- Area hub
- West Sussex
- Warranty
- One year on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Honest limits
We’d rather lose a job than do one that will not last, so these are the limits:
- Plumbing leaks, which need a plumber
- Holes rusted through the metal
- A cast iron or steel bath that’s cracked right through
Not sure? Send pictures and we will give you a straight answer before booking.
What we work on
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
- Acrylic baths
Towns and villages near Tower Hill
Also in Tower Hill
Covering Tower Hill
Tower Hill is about 1 mile south-west of Horsham, in West Sussex. Whether you’re in the middle of Tower Hill or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. We work in all 371 towns and villages across West Sussex. You can also see our page for London, about 33 miles away.
Postcode districts we cover here: RH13. Jobs here include addresses on Tower Hill, Tower Close and Salisbury Road. If you’re just outside Tower Hill, we cover Broadbridge Heath (1 mile north-west), Horsham (1 mile north-east), Southwater (2 miles south), Itchingfield (2 miles west) and Warnham (2 miles north). Within a short drive, we also cover Crawley (8 miles north-east), Haywards Heath (11 miles east), Burgess Hill (11 miles south-east), East Grinstead (15 miles east), Shoreham-by-Sea (15 miles south) and Broadfield (7 miles north-east).
Local landmarks in Tower Hill
Around Tower Hill, we work in homes near Warnham Park, St John's Catholic Primary School and Parish Church of St Mary. Other local landmarks include The Doyle School of Design and Technology (1.1 miles south-west), The Boar's Head Tavern (under half a mile east) and Tanbridge House School (0.8 miles north-west). The closest station to Tower Hill is Christs Hospital station, about 0.9 miles west of the centre. A little further out are Horsham Hospital (1.3 miles north-east) and Christs Hospital School Museum (1.1 miles south-west). Green spaces nearby include Warnham LNR.
Looking after it afterwards
A little care keeps the finish looking good. Our advice:
- Keep suction mats out of the bath
- Don’t let dyes or oils sit on the finish
- Do not leave bottles, razors or sponges standing on the surface
- Stick to gentle, non-abrasive cleaners
Use mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface.
Repairs by material
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. The bath needs to be firm and well supported for the finish to last.
DIY repairs versus a professional job
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
Your questions about bath re-enamelling in Tower Hill
Someone resurfaced my bath and it’s peeling. Can you help?
Normally, yes. We strip the failing coating and resurface it properly. Mention it when you send photos.
Do you do work for letting agents?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses in Tower Hill.
How long does re-enamelling last?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.
Can you do the outside of a roll-top?
Yes. We can do the inside and outside.
Do I need to be at home?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Will it make a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Is there a guarantee?
Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.
Do you need to take the bath out?
No, it stays where it is. Everything is done in your bathroom, with the room masked and ventilated.
Repair or replace in Tower Hill?
A refit takes several trades and several days. Re-enamelling takes one technician and usually one day, with the bath ready the next day. Our bath re-enamelling starts from £350. We do not add extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
Why Tower Hill customers choose us
- Colour mixed on the day to match
- Same prices wherever you are
- We come to you, anywhere in the UK
- Everything repaired in place
See our full price list and resurfacing vs replacement cost guide.
The process
Here’s how a visit generally runs: we arrive on time, protect everything around the work area, carry out the work and clear up. Plan for most of the day. Before we go, we’ll explain how long to leave it and how to look after it.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- We leave it to cure, and it’s normally ready the following day.
Getting ready for the visit
- Avoid using the area for a few hours before we arrive
- Clear toiletries, mats and anything else from around the area
- Keep children and pets away from the room on the day
How to get a price
Most customers in Tower Hill get their price from pictures. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
Related advice
Work for landlords and builders
Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip.
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
About our accreditations · Every repair comes with a one-year guarantee.
