North Somerset · England
Bath Re-enamelling for Towerhead homes
Damaged bath in Towerhead? We repair it in place, match it on site and guarantee the work for a year.
- Resurfacing from £350
- Stains that won’t shift
- Chips and rust in more than one place
How we handle bath re-enamelling in Towerhead
A re-enamelled bath looks and feels like a new one, without any of the disruption of replacing it. It suits anyone happy with the bathroom apart from the bath. Typical jobs include enamel that’s lost its shine and feels rough and stains that won’t shift, in acrylic baths, basins & shower trays and Victorian roll-tops.
Big or small, you get the same one-year guarantee in Towerhead and across North Somerset.
- Where
- Towerhead (BS29)
- Region
- North Somerset
- Cover
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
How it works
The work is clean and fairly quiet, so you can carry on at home. Protection goes down first, then the job itself takes most of the day. At the end we talk you through the curing time and the aftercare.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
Getting ready for the visit
- Let us know which floor the room is on
- Plan for the room to be out of bounds to pets and children
- Mention any earlier repairs or resurfacing
Get a quote
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job.
Advice
When to call us in Towerhead
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. We strip what’s failing and start again.
Get in touch if you’ve noticed any of these:
- Wear marks under the taps
- A peeling or bubbling previous coating
- A roll-top that’s seen better days
- Lots of chips and rust spots
Comparing quotes
- When it can be used again
- How the colour is matched
- Who will actually do the work
- How changes to the job are handled
Also near Towerhead
Other services in Towerhead
Looking after it afterwards
Aftercare is simple, and it makes a real difference:
- A quick wipe after use keeps limescale away
- Repair dripping taps early
- Keep toiletries on a shelf rather than in the bath
- Use washing-up liquid and a soft cloth
Use mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
On a worn bath, rust spots keep spreading. It’s simpler to resurface before they spread.
Covering Towerhead
Towerhead is about 4 miles east of Weston-super-Mare, in North Somerset. Wherever you are in the BS29 postcode area, we carry out the work at your property. Towerhead is one of 86 places in North Somerset we cover.
Jobs in BS29 work the same way as everywhere else we cover. Other places close to Towerhead include Sandford (1 mile east), Banwell (1 mile west), Winscombe (1 mile south-east), Nye (1 mile north) and Sidcot (2 miles south-east). Further out, we also cover Weston-super-Mare (4 miles west), Portishead (11 miles north), Clevedon (7 miles north), Nailsea (8 miles north-east), Milton (5 miles north-west) and Yatton (4 miles north).
Landmarks near Towerhead
Typical jobs here are in homes near Railway Inn, Banwell Primary School and Church of St Andrew and the streets around them. The closest station to Towerhead is Worle station, about 3.3 miles north-west of the centre. Well-known places in the area include Banwell Museum (0.7 miles west) and Banwell Castle (0.6 miles south-west). For a walk, there is Kingswood and Wavering Down.
Materials and what they mean for the repair
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is what we repair.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Work for landlords and builders
We regularly work with letting and managing agents. Just send pictures, the address and how to get access and we’ll handle the rest.
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which is easier on the people living there.
When a repair isn’t the answer
We will not take on work that won’t last, so these are the limits:
- A metal bath with a through crack
- Plumbing leaks, which need a plumber
- Steel that has corroded right through
If in doubt, send photos and we will say what we think before booking.
What we work on
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
Towerhead: your questions answered
Is the work guaranteed?
All our work carries a one-year guarantee. We will explain what it covers when we quote.
Do you do work for letting agents?
Yes, often. We quote for multiple addresses and fit around tenancy changeovers.
How long is the bath unusable?
Usually a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
Can I get a quote without a visit?
Yes, almost always. Clear pictures let us give you a fixed price without visiting.
Is there any odour?
Some materials have a smell while they’re applied. It clears as the materials cure.
Can pets and children be at home?
Please keep children and pets out of the room during the visit and until it has cured. The rest of the house is unaffected.
What do you need from me?
Just photos, your postcode and a contact number. On the day, we only need access to the room.
How much does bath re-enamelling cost in Towerhead?
Resurfacing from £350. The exact price depends on the damage, so we quote from photos. You’ll get a fixed figure before booking.
Should you replace it?
Replacement only makes sense in a few cases: if the bath is cracked through, if you want a different size or shape, or if you are refitting the entire room anyway. In most other cases, resurfacing is the better choice. Prices start from £350. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send photos and we will give you the exact figure.
What you get with us
- We will tell you if it’s not worth repairing
- Free fixed quotes from pictures
- CHAS and Constructionline accredited
- Most jobs done in one visit
Take a look at our prices page and guide to resurfacing and replacement costs.
DIY kit or professional repair?
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.
About our accreditations · Every repair comes with a one-year guarantee.
