Rhondda Cynon Taff · Wales

Bath Re-enamelling for Tre-Gibbon homes

Full bath re-enamelling and resurfacing for householders, landlords and businesses in Tre-Gibbon. Send pictures for a free, fixed quote.

  • Resurfacing from £350
  • A period or roll-top bath worth keeping
  • Wear marks under the taps
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath re-enamelling in Tre-Gibbon

Bath re-enamelling at your home in Tre-Gibbon

Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. You end up with a smooth, glossy surface. Common call-outs are for a dull, rough surface that won’t come clean and a period or roll-top bath worth keeping, on acrylic baths, Victorian roll-tops and basins & shower trays.

The work is covered for a year after we finish. If anything isn’t right, ring us and we’ll sort it.

Before and after: an old basin refinished to bright white
Area
Tre-Gibbon (CF44)
Area hub
Rhondda Cynon Taff
Warranty
A year, on every repair
Price
From £350. Free, fixed price from pictures
Call
0345 017 0787
Page updated
23 October 2026

Keeping it looking good

To keep it looking its best for years:

  • Fix dripping taps quickly
  • Wipe the bath dry after use in hard water areas
  • Clean with a soft cloth and mild detergent
  • Get any chip repaired quickly

Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Repair dripping taps promptly.

Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further.

What your bath is made of matters

Acrylic

We resurface acrylic baths as well, using a system that bonds to acrylic. It must be solid and not flex underfoot for the finish to last.

Pressed steel

Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.

Should you replace it?

A refit takes several trades and several days. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Our bath re-enamelling starts from £350. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.

Why choose Surface Doctor in Tre-Gibbon

  • Work done at your home or business
  • We’ll tell you if it’s not worth repairing
  • We leave the room as we found it
  • Same prices wherever you are

Read our full price list and resurfacing vs replacement cost guide.

DIY repairs versus a professional job

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.

FAQs for Tre-Gibbon

Will there be fumes?

Some odour is normal while we spray, so we ventilate the room. It clears as the finish cures.

Can you make a coloured bath white?

Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.

How quickly can you book me in?

That depends on our diary for your area. Send photos with your postcode and we’ll reply with the earliest dates.

Can you fix a peeling bath coating?

Yes. Stripping the old coating adds time, so it’s reflected in the quote.

How long does re-enamelling take?

Most baths are done in a day, ready the day after. We will confirm timings when we quote.

Is there a guarantee?

Yes, for a year. If there is a problem with the work in that time, we come back and put it right.

What happens after I send photos?

We come back with a fixed quote, plus dates. You are under no obligation.

Can you repair several things at once?

Of course, and it typically saves money. Send pictures of everything together and we’ll quote them together.

The process

We turn up when we said we would and looks over the damage before anything else. Dust sheets and masking tape go down before we open a single tin. The work itself takes the best part of a day, and the room is left clean and tidy.

  1. First we protect the bathroom and set up ventilation.
  2. Next we degrease the bath and fix chips and rust spots.
  3. We prepare the surface and apply a bonding primer.
  4. We spray on the new enamel finish in several coats.
  5. We leave it to cure, and it’s usually ready the next day.

Before we arrive

  • Make sure the area is dry
  • Let us know if it has been repaired before
  • Mention if the room is upstairs or in a flat

How to get a price

A quote takes minutes to ask for: photograph the damage, then the whole bath, add your postcode and send them over. You’ll get a fixed quote, not an estimate.

Get a free quote

Read more

Landlord and trade work in Tre-Gibbon

Landlords, letting agents and housing providers in Tre-Gibbon use us as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.

Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.

What we’re called out for in Tre-Gibbon

Enamel wears gradually. Abrasive cleaners, limescale and years of use wear the gloss away, typically first under the taps and around the waste.

Customers normally contact us about:

  • Staining under the taps and around the waste
  • Thin, worn enamel in places
  • A dull, rough surface that will not come clean
  • An original cast iron bath that needs restoring

What your quote should include

  • Whether cleaning and preparation are in the price
  • Whether the price is fixed and includes VAT
  • How soon you can use it again
  • Whether the colour is mixed to match

10 questions to ask before you book

Tre-Gibbon and the surrounding area

Tre-Gibbon is about 2 miles north of Aberdare, in Rhondda Cynon Taff. We travel to clients in Tre-Gibbon, so nothing has to leave your home. Tre-Gibbon is one of 133 places in Rhondda Cynon Taff we cover.

Jobs in CF44 work the same way as everywhere else we cover. Local streets include Merthyr Road, Church Avenue and Llwydcoed Road. If you’re just outside Tre-Gibbon, we cover Llwydcoed (1 mile south-west), Trecynon (1 mile south), Gilfach Goch (1 mile west), Penywaun (1 mile west) and Robertstown (1 mile south-east). Further out, we also cover Pontypridd (11 miles south-east), Mountain Ash (5 miles south-east), Tonypandy (8 miles south), Rhondda (6 miles south), Porth (9 miles south) and Church Village (13 miles south-east).

Local landmarks in Tre-Gibbon

Typical jobs here are in homes near Aberdare Park, Aberdare High School and St.John Baptist High School. Other local landmarks include Llwydcoed Primary (under half a mile south), Red Cow Inn (less than half a mile north-west) and St James's Church (under half a mile south-west). The closest station to Tre-Gibbon is Aberdare station, about 1.7 miles south-east. Other landmarks nearby include Morlais Castle (4.5 miles north-east) and St Tydfil's Hospital (3.7 miles east). Open spaces near Tre-Gibbon include Pwll Waun Cynon and Mynydd Aberdar.

Map of Tre-Gibbon © OpenStreetMap contributors

Honest limits

A repair is not always the answer, and we’ll tell you before we start. Repairs will not solve:

  • Holes rusted through the metal
  • Plumbing leaks, which need a plumber
  • A cast iron or steel bath that is cracked right through

If in doubt, send pictures and we will say what we think.

Surfaces we repair

  • Basins & shower trays
  • Pressed steel baths
  • Cast iron baths
  • Victorian roll-tops
  • Acrylic baths
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.