Cornwall · England
Bath re-enamelling & resurfacing in Treen, Cornwall
Problem with your bath in Treen? We repair it in place, match it on site and back it with a one-year guarantee.
- Resurfacing from £350
- A roll-top that is seen better days
- A coating lifting around the plughole
Bath re-enamelling in Treen, done in place
Re-enamelling is a one-day job for most baths, with the bath ready to use the following day. Taps, tiles, panels and plumbing all stay in place. Our repair technicians work on Victorian roll-tops, cast iron baths and pressed steel baths, and common reasons people contact us are lots of chips and rust spots and a period or roll-top bath worth keeping.
The work is guaranteed for twelve months. If something isn’t right in that time, we come back and put it right.
- Location
- Treen (TR19)
- Region
- Cornwall
- Cover
- 12 months on all our work
- Quotes
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Questions from Treen
How do I book?
Photos of the damage, a picture of the entire bath and your postcode. After that, we just agree a date.
Does someone need to be in?
Yes. We need access to the room while we work, at a time we agree with you.
Do you need to take the bath out?
No, it stays where it is. Everything is done in your bathroom, with the room masked and ventilated.
Can you quote from photos?
Yes, almost always. Clear pictures let us give you a fixed quote without visiting.
Are you accredited?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Will you leave a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
How do I get a price for bath re-enamelling in Treen?
Resurfacing from £350. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.
How long is the bath unusable?
One day for most baths, ready the following day. We give you timings with the quote.
Landlords, agents and businesses in Treen
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
Hospitality businesses cannot afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
Treen and nearby
Treen is about 6 miles south-west of Penzance, in Cornwall. Clients in Treen get the same service as everywhere else we cover: a fixed quote from photos, and a technician at your door on the day. Treen is one of 644 towns and villages in Cornwall we cover.
Our technicians cover all of the TR19 postcode area and the streets around it. Streets in the area include St Buryan Hill and Treen Hill. We also cover the places around Treen: Penberth (1 mile south-east), Bottoms (1 mile north-west), Trethewey (1 mile west), Porthcurno (1 mile west) and St Levan (1 mile south-west). We also work in nearby towns such as Penzance (6 miles north-east), Hayle (14 miles north-east), St Ives (13 miles north-east), Porthleven (15 miles east), Newlyn (5 miles north-east) and Carbis Bay (12 miles north-east).
Around Treen
Typical jobs here are in homes near St Levan's Church and St Levan Primary School and the streets around them. Other landmarks nearby include Museum of Global Communications (1 mile south-west). Not far away are Chapel Carn Brea.
Keeping it looking good
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Clean with a soft cloth and mild detergent
- A dripping tap should be fixed promptly
- Respect the curing time we give you
- Dry the bath after use to stop limescale
Use mild, non-abrasive cleaners, don’t use suction bath mats, and keep bottles and razors off the surface.
If a previous coating is starting to peel, don’t pick at it. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
Different materials, different repairs
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. The bath needs to be firm and well supported for the finish to last.
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
What happens on the day
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job usually takes most of the day. We tidy up before we leave and let you know when you can use it again.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the next day.
Getting ready for the visit
- Ensure the area is dry
- Let us know about parking or access
- Point us to the nearest place to park
How to get a price
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed quote without visiting.
Related advice
Repair or replace in Treen?
Replacing a cast iron bath is a big job: they’re heavy, often need breaking up, and a new one is not cheap. Re-enamelling avoids all of it. Our bath re-enamelling starts from £350. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send photos and you’ll get a fixed figure.
Why us?
- Colour-matched on site
- Dust sheets down, tidy finish
- Same prices wherever you are
- Nothing taken out or refitted
Read our full price list and guide to resurfacing and replacement costs.
Other services in Treen
Can I fix it myself?
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
What affects the price in Treen
Prices start from £350. Each job gets its own fixed price. These are the things that affect it:
- Whether it’s a chip, crack, burn or wear
- Doing more than one item at once
- How hard the colour is to match
- What the surface is made of
We do not add extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Send pictures for a quote
The better the photos, the more accurate the price. Here’s what we find most useful:
- Any details about the material
- Something in shot to show the size
- A close-up of the damage, in focus
- Where you are, by postcode
The quickest way to a price is to send a couple of photos through our quote form or call us. We’ll tell you honestly if a repair is the right fix.
What we cannot put right
Some jobs are not right for a repair, for example:
- A bath that is rusted through
- Leaks from fittings rather than the bath
- An acrylic bath that flexes badly underfoot
Not sure? Send pictures and we’ll give you a straight answer before booking.
What we work on
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
About our accreditations · Every repair comes with a one-year guarantee.
