Ceredigion · Wales
Bath Re-enamelling for Trefeurig homes
Bath re-enamelling across Trefeurig and nearby, generally in one visit.
- Resurfacing from £350
- A bath in a colour that no longer suits
- An original cast iron bath that needs restoring
Why repair rather than replace?
For a sound bath, resurfacing costs far less than replacement, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s also far quicker. Resurfacing from £350, with every job priced individually. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
Why us?
- Work done at your home or business
- A year’s guarantee on all work
- A fixed quote before booking
- Colour-matched on site
Take a look at our prices page or resurfacing vs replacement cost guide.
Bath re-enamelling in Trefeurig without replacing anything
Re-enamelling works especially well on cast iron and steel, and we can resurface acrylic baths as well. You end up with a smooth, glossy surface. Whether it’s several chips and rust patches and a coating lifting around the plughole, we can usually put it right, on pressed steel baths, Victorian roll-tops and basins & shower trays alike.
You are covered for a year from the day of the repair. Just call us if there’s a problem and we will come back.
- Location
- Trefeurig (SY23)
- County
- Ceredigion
- Guarantee
- One year on every repair
- Quote
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Honest limits
We will not take on work that will not last, so here’s what a repair cannot put right:
- A metal bath with a through crack
- A poorly supported acrylic bath, until it’s firmed up
- Anything hidden under an old coating, until we remove it
Send us photos and we’ll tell you honestly before you book.
Materials we repair
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
Trefeurig and the surrounding area
Trefeurig is about 4 miles north-east of Aberystwyth, in Ceredigion. Anywhere in SY23, a technician comes to you. Trefeurig is one of 125 towns and villages in Ceredigion we cover. Our jobs stretch from Trefeurig to Liverpool (about 80 miles away).
Here we cover the SY23 postcode area. That includes homes on Garnwen, Cae Mawr and Dolhelyg. We also cover the places around Trefeurig: Penrhyn-coch (1 mile west), Pen-y-garn (2 miles north-west), Rhydypennau (2 miles north-west), Bow Street (2 miles west) and Taigwynion (2 miles north-west). Further out, we also cover Aberystwyth (4 miles south-west), Trefechan (5 miles south-west), Penparcau (5 miles south-west), Caeffynnon (5 miles south-west), Llanbadarn Fawr (4 miles south-west) and Waunfawr (3 miles south-west).
Landmarks near Trefeurig
Typical jobs here are in homes near Church of Saint John the Divine and Ysgol Penrhyncoch and the streets around them. The nearest railway station is Bow Street station, roughly 2 miles west. Further afield, we also cover the area around Aberystwyth University Ceramics Collection (3.7 miles south-west) and Ystrad Peithyll (1 mile south). For a walk, there’s Allt Dderw and Penglais Nature Park.
- Parks and local facilities nearby include Parsel Canol (2.4 miles south-west)
DIY kit or professional repair?
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
Towns and villages near Trefeurig
What else we do in Trefeurig
Materials and what they mean for the repair
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
The process
We agree an arrival time beforehand, so you are not left guessing. On site, it takes a full day. The room is left tidy.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the day after.
Preparing for the visit
- Clear toiletries, mats and anything else from around the area
- Let us know which floor the room is on
- Keep pets and children out of the room while we work
Ask for a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them to us. You will get a fixed quote, not an estimate.
Advice
Looking after it afterwards
It’s all simple stuff, just a few sensible habits:
- Rinse off hair dye, oils and bath bombs immediately
- Stick to gentle, non-abrasive cleaners
- Keep toiletries on a shelf rather than in the bath
- Do not leave a chip unrepaired
Rinse the bath and wipe it over after use, especially in hard water areas, to stop limescale building up.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
FAQs for Trefeurig
How durable is a resurfaced bath?
Care for it and it lasts. Avoid abrasive cleaners and suction mats.
I rent my home. Can I book you?
Yes. Ask your landlord first, and we can send them the quote if that helps.
Can you make a coloured bath white?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
When can you do it?
We will give you dates with your quote. Tell us if you need it done quickly.
Will the bath be moved?
Not at all. We work on the bath in place, with the room protected and ventilated.
Can I add another job to the visit?
Yes. Doing several items on one visit usually costs less than separate visits. Include photos of each item.
Does someone need to be in?
Yes. We need access to the room while we work, at a time we agree with you.
Do you cover Trefeurig?
Yes, we do. Repair technicians travel to Trefeurig from across the region, and the price is the same as everywhere else.
What bath re-enamelling costs
Prices start from £350. Every quote is fixed and free. What we take into account:
- Any earlier repairs that need removing first
- The material and finish
- How many areas need work
- What kind of damage it is
A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
How to get a fixed quote
We price nearly every job from pictures. This is what we need:
- A clear, close picture of the problem area
- The postcode, so we can plan the visit
- Any details about the material
- Something in shot to show the size
To get a price, send a couple of pictures using our quote form or ring us. We will say right away if a repair is the right fix.
When to call us in Trefeurig
Older baths often have several problems at once: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.
You may need us if you’ve spotted:
- A coating lifting around the plughole
- Chips and rust in more than one place
- Wear marks under the taps
- An outdated colour you’d like to change
Questions to ask before you book
- Whether they match the colour on site
- How long the guarantee is and what it covers
- What protection goes down before work starts
- How long it needs to cure
About our accreditations · Every repair comes with a one-year guarantee.
