Denbighshire · Wales
Bath Re-enamelling in Trevor
Bath re-enamelling in and around Trevor: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- A coloured bath you want in white
- Several chips and rust patches
Bath re-enamelling at your home in Trevor
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. Typical jobs include a bath that stays dull however much you clean it and a period or roll-top bath worth keeping, on pressed steel baths, Victorian roll-tops and acrylic baths.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before booking.
- Where
- Trevor (LL20)
- Region
- Denbighshire
- Guarantee
- 12 months on all our work
- Quote
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Should you replace it?
If the bath is sound, re-enamelling is normally much cheaper than replacing it, when you count removal, plumbing, tiling and decorating. It’s much quicker too. Our bath re-enamelling starts from £350. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.
What you get with us
- Colours mixed by hand to suit your surface
- We will tell you if it’s not worth repairing
- One price list for the whole UK
- Every repair guaranteed for a year
Take a look at our full price list or bath cost comparison.
DIY repairs versus a professional job
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
FAQs for Trevor
What happens after I send pictures?
You get a fixed quote and available dates. If anything’s unclear, we’ll ask for another photo.
Do the materials smell?
There can be some smell while we work, which is why we ventilate. It fades as everything cures.
Is it messy?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
Do you resurface freestanding baths?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
What does bath re-enamelling cost?
Prices start from £350. We give a fixed quote based on pictures of the damage. Send a close-up of the damage and a wider photo and your postcode.
Can you fix a peeling bath coating?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
Is there a call-out fee?
Travel is included in the price, and we charge the same wherever you are.
Does re-enamelling smell?
There is some smell while the coating is applied, so we ventilate the room. It clears as the finish cures.
Trevor and the surrounding area
Trevor is about 7 miles south-west of Wrexham, in Denbighshire. Jobs in Trevor are booked in like any other job: a fixed quote from photos, then a visit to do the work. Trevor is one of 81 towns and villages in Denbighshire where we work. Our nearest city page is Liverpool, about 31 miles away.
Our visits in LL20 work the same way as everywhere else we cover. That includes homes on Station Road, George Avenue and Telford Avenue. Neighbouring places we cover include Cefn (1 mile north), Cefn-bychan (1 mile east), Cefn-mawr (1 mile east), Froncysyllte (1 mile south) and Acrefair (1 mile north-east).
What’s near Trevor
Our clients here include homes close to Telford Inn, The Land and Ysgol Rhiwabon, among other places. Nearby too are Trevor Church (0.7 miles west) and Ysgol Acrefair (0.6 miles north-east). The nearest railway station is Ruabon station, about 2.1 miles north-east. Nearby you’ll also find Chirk Castle (2.7 miles south) and Chirk Community Hospital (2.5 miles south-east). Not far away are The Lake and Copperas.
What bath re-enamelling costs
Prices start from £350. Every quote is fixed and free. What we take into account:
- The type of damage
- How much damage there is
- Any earlier repairs that need removing first
- Unusual colours or finishes
Compared with replacing, a repair is generally a fraction of the price, because there is no removal, plumbing or making good. The quote lists exactly what you are paying for.
Quotes from your photos
Good pictures mean an accurate price. Here’s what we find most useful:
- A wider photo showing the entire bath
- Natural light rather than flash
- Details of any past repairs
- What it’s made of, if you know
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
How to care for the repair
A little care keeps the finish looking good. We recommend:
- Avoid suction-cup mats
- Stick to gentle, non-abrasive cleaners
- Repair dripping taps early
- Respect the curing time we give you
Stick to mild, non-abrasive cleaners, do not use suction bath mats, and keep bottles and razors off the surface.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Landlords, agents and businesses in Trevor
We regularly work with letting and managing agents. Send the address, pictures and access details and we will arrange it.
For anyone letting property in or around Trevor, we’ll quote for several properties at once. Just send pictures for each address and we will come back with a combined price.
Common problems we fix in Trevor
Previous coatings can fail too, peeling around the waste or bubbling. We strip what’s failing and start again.
Common reasons people in Trevor contact us include:
- A bath that stays dull however much you clean it
- Worn patches where water runs and sits
- Chips and rust in more than one place
- A peeling or bubbling previous coating
Before you book anyone
- The length of the guarantee and what it covers
- What aftercare is recommended
- Whether there are any call-out or travel charges
- What preparation is included
Places near Trevor
Also in Trevor
What your bath is made of matters
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
What we do, step by step
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, protect the area, then carry out the work, which generally takes most of the day. If anything looks different from your photos, we will talk to you before going ahead.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the following day.
Before we arrive
- Mention any parking restrictions or tricky access
- Keep pets and children out of the room while we work
- Let us know which floor the room is on
Get a quote
We price from pictures so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
