Denbighshire · Wales
Bath chip & crack repair in Trevor, Denbighshire
Bath repair in and around Trevor: photo quotes, tidy work and a year’s guarantee.
- Repairs from £95
- An old repair that has yellowed or come loose
- Scratches you can feel with a fingernail
Trevor questions
Will I be able to see the repair?
The goal is a repair that blends in. How well it disappears depends on the condition of the rest of the bath.
Can you repair a chip on a coloured bath?
Yes. We mix the colour on the day to match, including pastel and older colours.
What if the damage is worse than the pictures show?
If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.
Is a bath repair permanent?
A properly prepared repair should last a long time, and it’s guaranteed for a year. Gentle cleaning helps.
Is a holed acrylic bath repairable?
Usually. Photos of the hole and the underside help us check.
Is there a guarantee?
Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.
When can you do it?
It depends on the time of year and where you are. Send photos with your postcode and we will reply with the earliest dates.
What areas do you cover?
Everywhere in the UK, Trevor included. There is no extra charge for travel.
About our bath repair in Trevor
Most bath damage, from chips and cracks to rust spots and holes, is repaired in place. There is no plumbing to disconnect, the tiles are not touched, and the finish is matched to the rest of the bath. If you’re dealing with a chipped rim or side and rust by the waste and overflow, we can help, whatever the material.
You are covered for a year from the day of the repair. If anything is not right, ring us and we will come back.
- Area
- Trevor (LL20)
- Area hub
- Denbighshire
- Guarantee
- A year, on every repair
- Quotes
- From £95. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
How the visit works
Here’s how a visit usually runs: we arrive on time, sheet and mask the area around the job, do the job and clear up. Plan for a few hours. Before we go, we will explain when it can be used and what to avoid for the first few days.
- We clean the area and remove any loose enamel or rust.
- The chip or crack is filled, then sanded level with the bath.
- We mix the colour on the day to match your bath’s exact shade.
- We apply the finish coats and polish the repair so it blends in.
- The repair is left to cure, and most baths can be used the day after.
Before we arrive
- Let us know about parking or access
- Tell us about any previous repairs or coatings
- Open a window if you can
How to get a price
For a price in Trevor, pictures are the quickest way: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Read more
Trevor and nearby
Trevor is about 7 miles south-west of Wrexham, in Denbighshire. Our technicians come to homes and businesses in Trevor, so you don’t need to take anything anywhere. Trevor is one of 81 places in Denbighshire we cover. Our nearest city page is Liverpool, about 31 miles away.
All of LL20 is covered, from the main roads to the quietest streets. Local streets include Station Road, George Avenue and Telford Avenue. We also cover the places around Trevor: Cefn (1 mile north), Cefn-bychan (1 mile east), Cefn-mawr (1 mile east), Froncysyllte (1 mile south) and Acrefair (1 mile north-east).
Landmarks near Trevor
Locally, our jobs take us to homes close to Telford Inn, The Land and Ysgol Rhiwabon, among other places. Also close by are Trevor Church (0.7 miles west) and Ysgol Acrefair (0.6 miles north-east). For rail, the closest station is Ruabon station, about 2.1 miles north-east of the centre. Well-known places in the area include Chirk Castle (2.7 miles south) and Chirk Community Hospital (2.5 miles south-east). Green spaces nearby include The Lake and Copperas.
What bath repair costs
Repairs from £95. You won’t pay by the hour. The price depends on:
- Unusual colours or finishes
- Whether old repairs or coatings need taking off
- The material
- How easy the damage is to reach
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send pictures and we’ll give you the exact figure.
Send photos for a quote
Two or three clear photos are typically enough. It helps if you send:
- Where you are, by postcode
- A wider photo showing the whole bath
- A close-up of the damage, in focus
- Any details about the material
Getting a price is easy: take a close-up of the damage and a photo from further back, send them over with your postcode, and we’ll reply with a fixed quote. Quotes are free and you are under no obligation.
Towns and villages near Trevor
What else we do in Trevor
What we can’t put right
To be straight with you, some problems need a different fix:
- Leaks from the waste or overflow fittings (a plumber’s job)
- A steel bath rusted through
- Acrylic cracks with no access behind them
Not sure? Send photos and we’ll give you a straight answer before you book.
Materials we repair
- Cast iron enamel
- Acrylic
- Pressed steel enamel
- Whirlpool & spa baths
- Roll-top & freestanding
Why repair rather than replace?
A new bath brings a chain of other jobs: the tiles sitting on the rim tend to break, a new panel is often needed, and a plumber has to disconnect and reconnect everything. Repairing the damage avoids all of that. Our bath repair starts from £95. No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Why Trevor clients choose us
- Every repair guaranteed for a year
- No extra charge for your area
- Typically one visit, start to finish
- Rooms protected and left tidy
See our full price list and resurfacing vs replacement cost guide.
Signs you need bath repair in Trevor
Heavy toiletries are the biggest single cause of chips, closely followed by shower heads. Fittings cause damage too: water sits around them, and any chip there soon rusts.
The things customers typically mention when they call are:
- Rust by the waste and overflow
- Cracks in an acrylic bath
- A chip where the taps sit
- Damage done while the bathroom was being fitted
What your quote should include
- The length of the guarantee and what it covers
- How your room will be protected
- Whether the price is fixed and includes VAT
- How long it needs to cure
Different materials, different repairs
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, especially around the waste, so repair chips early.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is what we repair.
Can I fix it myself?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
Looking after it afterwards
Nothing complicated is needed:
- Rinse the bath after use, especially in hard water areas
- Don’t leave a fresh chip for long
- Stick to mild cleaners and a soft cloth
- Do not scrub with anything abrasive
Clean with mild, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Deal with new chips early, before rust sets in.
If water is getting through a crack, stop using the bath. Leaks under a bath can damage floors and ceilings.
About our accreditations · Every repair comes with a one-year guarantee.
