Cornwall · England
Bath Re-enamelling in Trewollock
Our repair technicians come to Trewollock for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.
- Resurfacing from £350
- Brown or grey marks that do not clean off
- A dull, rough surface that will not come clean
Trewollock: your questions answered
Is it safe with children and pets around?
Just keep them out of the work area. We’ll let you know when it’s safe to use again.
Can you re-enamel a roll-top bath?
Yes. We can do the inside and outside.
Can I get a quote without a visit?
Normally, yes. A close-up and a wider photo are enough to give a fixed price.
How much does bath re-enamelling cost in Trewollock?
Resurfacing from £350. The exact price depends on the damage, so we quote from photos. You will get a fixed figure before you book.
Will the price change on the day?
The price is fixed for what the pictures show. Anything extra is discussed before we begin.
Do you cover the whole of Cornwall?
Across the UK, so Trewollock is covered. Our prices are the same everywhere.
Will there be a smell?
There may be a mild smell during the work, which fades afterwards.
Can you fix a peeling bath coating?
In most cases. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
Bath re-enamelling at your home in Trewollock
When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. There is no removal, plumbing or tiling involved. Common call-outs are for worn patches where water runs and sits and a period or roll-top bath worth keeping, across pressed steel baths, basins & shower trays and Victorian roll-tops.
You are covered for a year from the day of the repair. Just call us if there’s a problem and we’ll sort it.
- Where
- Trewollock (PL26)
- Region
- Cornwall
- Warranty
- One year on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Prices and what affects them
Resurfacing from £350. A fixed quote means you know the cost before booking. We look at:
- Any earlier repairs that need removing first
- The type of damage
- The colour and finish to match
- Access to the area
The price reflects the work involved, not where you live. The full price is agreed before you book, with no extras added later.
Getting a price from pictures
The better the photos, the more accurate the price. Here’s what we find most useful:
- A coin beside the damage so we can judge size
- Good light, ideally daylight, without flash glare
- Where you are, by postcode
- A wider photo showing the entire bath
If you’re in Trewollock and want a price, the easiest route is pictures: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.
How the visit works
It’s a tidy, low-fuss visit. We agree the arrival time in advance, cover and mask the work area, and get on with the job, which normally takes most of the day. If anything looks different from your pictures, we will talk to you before going ahead.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the following day.
How to prepare
- Point us to the nearest place to park
- Let us know if it has been repaired before
- Avoid using the area for a few hours before we arrive
Getting a price
You do not need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.
Advice
When to call us in Trewollock
Older baths often have several problems at once: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.
If you can see any of these, send us a photo:
- A coloured bath you want in white
- Worn patches where water runs and sits
- Brown or grey marks that do not clean off
- A roll-top that’s seen better days
Before booking anyone
- How long it needs to cure
- What preparation is included
- Whether the price is fixed and includes VAT
- How changes to the job are handled
Should you replace it?
Getting a cast iron bath out is hard work: they’re heavy, frequently need breaking up, and a new one isn’t cheap. Re-enamelling avoids all of it. Prices start from £350. The price depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. We give a fixed price from your pictures, so there are no surprises on the day.
Why book with us
- Work done at your home or business
- Usually one visit, start to finish
- We’ll tell you if it’s not worth repairing
- A year’s guarantee on all work
Read our full price list or resurfacing vs replacement cost guide.
Our work in Trewollock
Trewollock is about 6 miles south of St Austell, in Cornwall. From the centre of Trewollock to the outlying streets, the service is the same: a fixed price, a tidy visit and a guarantee. We work in all 644 towns and villages across Cornwall.
Our repair technicians cover all of the PL26 postcode area. We also travel to Gorran Haven (1 mile south), Portmellon (1 mile north), Mevagissey (2 miles north), Tregavarras (2 miles west) and Pentewan (3 miles north). Further out, we also cover Truro (12 miles west), Falmouth (14 miles south-west), St Austell (6 miles north), Sandy Bottom (7 miles north), Penryn (15 miles west) and Bethel (7 miles north).
What’s near Trewollock
Typical jobs here are in homes near Church of St Just and Gorran School and the streets around them. Other landmarks nearby include Bodrugan (0.8 miles north-east) and Mevagissey Museum (1.6 miles north).
Should I try a DIY kit first?
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.
Towns and villages near Trewollock
Also in Trewollock
Materials and what they mean for the repair
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is what we repair.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
How to care for the repair
It’s all simple stuff:
- Respect the curing time we give you
- Dry the bath after use to stop limescale
- Do not leave a chip unrepaired
- Rinse off hair dye, oils and bath bombs right away
Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Repair dripping taps promptly.
Do not try to scrub a worn bath back to shine. It just wears the enamel further and makes resurfacing more work.
Work for landlords and builders
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
If you manage property in Trewollock, we will quote for several properties at once. Send pictures for each one and we’ll price them together.
About our accreditations · Every repair comes with a one-year guarantee.
