Norfolk · England
Bath Re-enamelling in Trowse Newton
Fixed-price bath re-enamelling in Trowse Newton and the surrounding area, done in a single visit in most cases and guaranteed for a year.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- A peeling or bubbling previous coating
How we handle bath re-enamelling in Trowse Newton
We re-enamel plenty of period and roll-top baths, which are heavy, hard to move and costly to replace. Resurfacing them in place keeps the original bath. Whether it’s several chips and rust patches and a period or roll-top bath worth keeping, we can help, on cast iron baths, pressed steel baths and acrylic baths alike.
Whatever the size of the job, you get the same one-year guarantee in Trowse Newton and across Norfolk.
- Where
- Trowse Newton (NR14)
- Area hub
- Norfolk
- Warranty
- 12 months on all our work
- Quote
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
For landlords and businesses
If you manage property in Trowse Newton, we’ll quote for several properties at once. Just send photos for each address and we will price them together.
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit.
Should you replace it?
For a sound bath, resurfacing costs far less than replacement, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Prices start from £350. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Why Trowse Newton clients choose us
- Technicians who travel to you, UK-wide
- One visit for most repairs
- Colour-matched on site
- No need to remove anything
See our full price list or resurfacing vs replacement cost guide.
Common questions in Trowse Newton
Is there any odour?
There can be some smell while we work, so we ventilate the room. It clears as the materials cure.
Is there a smell?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
It’s been repaired before. Can you still fix it?
Typically, yes. The old repair comes out first.
Can a failed resurfacing be redone?
Yes. Removing the old finish takes extra time, which we include in the price.
Do you do work for letting agents?
Yes, often. We quote for multiple addresses and fit around tenancy changeovers.
Is it OK to have pets in the house?
On the day, the room should be kept clear of pets and children.
How soon can you come?
It depends on the time of year and where you are. We’ll offer you dates when we send your quote.
What does bath re-enamelling cost?
Resurfacing from £350. We give a fixed price based on photos of the damage. Send a close-up and a photo of the whole item and your postcode.
Do you need bath re-enamelling in Trowse Newton?
In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.
You may need us if you’ve spotted:
- Wear marks under the taps
- A roll-top that’s seen better days
- An old resurfacing that’s failing
- Brown or grey marks that don’t clean off
Before booking anyone
- Who turns up on the day
- A fixed price, and whether VAT is included
- The length of the guarantee and what it covers
- What happens if the damage is worse than the photos show
About Trowse Newton
Trowse Newton is about 2 miles south-east of Norwich, in Norfolk. Clients in Trowse Newton get the same service as everywhere else we cover: a fixed price from your pictures, then a visit to do the work. We work in all 797 towns and villages across Norfolk.
We cover every part of the NR14 postcode area. That includes homes on The Street, Barn Meadow and School Terrace. We also travel to Riverside (1 mile north-west), Thorpe Hamlet (1 mile north), Pockthorpe (2 miles north), Thorpe St Andrew (2 miles north-east) and Kirby Bedon (2 miles east). Further out, we also cover Wymondham (9 miles west), Sprowston (3 miles north), Attleborough (15 miles south-west), North Walsham (15 miles north), Hethersett (6 miles west) and Cringleford (4 miles west).
Around Trowse Newton
We visit homes around Church of St Andrew, The Hewett School and Trowse Primary School and the streets around them. Other local landmarks include Lion Wood (1.3 miles north), The White Horse pub (within half a mile north-west) and Notre Dame High School (1.2 miles north-west). The closest station to Trowse Newton is Norwich station, roughly 1.2 miles north-west of the centre. Other landmarks nearby include Norfolk and Norwich Hospital (1.6 miles north-west) and Norwich Castle (1.5 miles north-west). Green spaces nearby include Bargate and Wensum Local Nature Reserve.
What affects the price in Trowse Newton
Prices start from £350. We price every job individually. What matters most is:
- Whether old repairs or coatings need taking off
- How easy the damage is to reach
- The material and finish
- Whether it’s a chip, crack, burn or wear
Rather than charging by the hour, we price the whole job up front. It depends on the damage, the material and access.
Quotes from your photos
Good photos mean an accurate price. Here’s what helps:
- The material, if you know it
- A coin beside the damage so we can judge size
- Natural light rather than flash
- Whether it’s been repaired or coated before
We price from photos so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.
What happens on the day
When we visit, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. The job usually takes the best part of a day. We clean up when we’re done and let you know when you can use it again.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Keep pets and children out of the room while we work
- Tell us about any previous repairs or coatings
- Avoid using the area for a few hours before we arrive
Get a quote
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can give you a fixed quote the same day in most cases.
Advice
Different materials, different repairs
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s the part we put right.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Also near Trowse Newton
What else we do in Trowse Newton
DIY kit or professional repair?
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
Looking after it afterwards
Much of the damage we repair could have been avoided. A few tips:
- Don’t use the bath until it has fully cured
- Store bottles off the bath
- Wash away dyes and oils after use
- Dry the bath after use to stop limescale
Dry the bath after use if possible, particularly with hard water, and rinse off any bath products.
Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.
About our accreditations · Every repair comes with a one-year guarantee.
