Dorset · England
Bath Re-enamelling in Turlin Moor
Bath re-enamelling across Turlin Moor and nearby, done in a single visit in most cases.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- Chips and rust in more than one place
Bath re-enamelling in Turlin Moor, done in place
After cleaning, repairing and priming, we spray on the new finish. Most of the work, and most of the durability, is in the preparation, so we don’t cut corners on it. We work on cast iron baths, Victorian roll-tops and basins & shower trays, and people most often call us about an outdated colour you’d like to change and enamel that’s lost its shine and feels rough.
We stand behind the work with a one-year guarantee.
- Where
- Turlin Moor (BH15, BH16)
- County
- Dorset
- Guarantee
- A year, on every repair
- Quote
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Turlin Moor questions
Is it worth repairing rather than replacing?
Generally, if the item is otherwise sound. A repair avoids removal and making good. If replacing would be better, we will say so.
Can pets and children be at home?
Please keep children and pets out of the room during the visit and until it has cured. The rest of the house is unaffected.
How quickly can you book me in?
That depends on our diary for your area. Send photos with your postcode and we’ll reply with the earliest dates.
Can you do the outside of a roll-top?
Yes. Inside and out if you’d like.
Do you work for landlords and businesses?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses.
What information do you need?
Photos of the damage, a picture of the entire bath and your postcode. Then we will agree a date.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
What happens after I send pictures?
We come back with a fixed price, plus dates. You’re under no obligation.
Landlords, agents and businesses in Turlin Moor
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Where we work around Turlin Moor
Turlin Moor is about 3 miles south-west of Broadstone, in Dorset. Anywhere in BH15, we carry out the work at your property. Turlin Moor is one of 462 towns and villages in Dorset where we work.
Our visits in BH15 and BH16 are booked in the same way as anywhere else. From Hoyal Road, Shore Lane and Egmont Road or a nearby road, a technician can come to you. We also cover the places around Turlin Moor: Hamworthy (1 mile east), Upton (1 mile north), Lytchett Minster (2 miles north-west), Creekmoor (2 miles north-east) and Post Green (2 miles north-west). Within a short drive, we also cover Christchurch (12 miles east), Wimborne Minster (6 miles north-east), Blandford Forum (11 miles north-west), Verwood (12 miles north-east), Ferndown (8 miles north-east) and Broadstone (3 miles north-east).
Around Turlin Moor
Around Turlin Moor, we work in homes near Carter Community School, Upton Junior School and St Gabriel's Church, among other places. Turlin Moor has its own railway station: Hamworthy station. Other landmarks nearby include Brownsea Castle (3.9 miles south-east) and Dolphin Shopping Centre (2 miles east). Not far away are Ham Common (LNR) and Beacon Hill.
- Parks and local facilities nearby include Poole (1.9 miles east)
How the visit works
Your technician turns up at the time we agreed with you, introduces themselves and looks over the damage before anything else. Dust sheets and masking tape go down before we open a single tin. Most visits take most of the day, and we leave the room as we found it.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Let us know if it has been repaired before
- Mention any parking restrictions or tricky access
- Clear the area around the damage
Getting a price
You don’t need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Read more
What we cannot put right
Honesty matters more than a booking, so here’s what a repair cannot fix:
- Leaking taps or wastes (a plumber’s job)
- An acrylic bath that flexes badly underfoot
- Holes rusted through the metal
Send us photos and we will tell you honestly.
Materials we repair
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
When to call us in Turlin Moor
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
Typical reasons for a call-out include:
- A bath that stays dull however much you clean it
- Staining under the taps and around the waste
- Lots of chips and rust spots
- A coating lifting around the plughole
What to look for in a quote
- How the colour is matched
- How the room is protected while they work
- What the guarantee covers, and for how long
- Whether a trained technician does the job
Aftercare tips
How the surface is treated afterwards matters:
- Use washing-up liquid and a soft cloth
- Respect the curing time we give you
- Avoid suction-cup mats
- Rinse off hair dye, oils and bath bombs immediately
Rinse the bath and wipe it over after use, particularly where water is hard, so limescale can’t build up.
Do not try to scrub a worn bath back to shine. It removes more of the surface.
Towns and villages near Turlin Moor
More services for Turlin Moor
What affects the price in Turlin Moor
Resurfacing from £350. We charge the same across the UK, including Turlin Moor. The price reflects:
- Whether old repairs or coatings need taking off
- Unusual colours or finishes
- What the surface is made of
- Whether we combine several jobs
What it costs depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. We give a fixed quote from your pictures, so there are no surprises on the day.
Getting a price from photos
You can normally get a fixed price without us visiting. To help us price it:
- Any earlier repairs or coatings
- Any details about the material
- Daylight if possible, and no flash reflection
- Where you are, by postcode
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Should I try a DIY kit first?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Materials and what they mean for the repair
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
About our accreditations · Every repair comes with a one-year guarantee.
