Dorset · England
Bath re-enamelling & resurfacing in Beacon Hill, Dorset
We travel to Beacon Hill for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- Staining under the taps and around the waste
- A coating lifting around the plughole
Your questions about bath re-enamelling in Beacon Hill
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.
Can you re-enamel a roll-top bath?
Yes, often. The inside is resurfaced, and we can refinish the outside as well.
How long does re-enamelling last?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.
Is it messy?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Is there a smell?
A little, during the work. We set up ventilation and the smell fades as it cures.
What information do you need?
Send pictures through the quote form or call 0345 017 0787, and we’ll take it from there.
What happens once I’ve sent photos?
We check the damage, the material and your postcode, then reply with a quote and the next dates we have.
Can you repair something that is been repaired before?
Most of the time. Tell us what was done before and we will plan for it.
Bath re-enamelling at your home in Beacon Hill
If your bath is sound but looks tired, re-enamelling is typically the most cost-effective option. It avoids removal, plumbing and re-tiling. We regularly repair basins & shower trays, Victorian roll-tops and pressed steel baths, and the jobs we see most are worn patches where water runs and sits and lots of chips and rust spots.
We guarantee the work for a year. If something isn’t right in that time, we come back and put it right.
- Area
- Beacon Hill (BH16, BH21)
- County
- Dorset
- Warranty
- One year on every repair
- Price
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Aftercare tips
It’s all simple stuff, just a few sensible habits:
- Don’t leave a chip unrepaired
- Keep suction mats out of the bath
- Fix dripping taps quickly
- Wash away dyes and oils after use
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
On a worn bath, rust spots keep spreading and make the job bigger. It’s simpler to resurface before they spread.
The process
Here’s how a visit generally runs: we arrive on time, sheet and mask the area around the job, carry out the work and clear up. Plan for a full day from start to finish. Before leaving, we tell you how long to leave it and how to look after it.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Mention any earlier repairs or resurfacing
- Keep children and pets away from the room on the day
- Open a window if you can
Ask for a price
If you’re in Beacon Hill and want a price, the easiest route is photos: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Read more
Places near Beacon Hill
What else we do in Beacon Hill
Our work in Beacon Hill
Beacon Hill is about 4 miles north-west of Poole, in Dorset. We work in every kind of home, old or new, large or small, plus businesses and rented homes. Beacon Hill is one of 462 towns and villages in Dorset we cover.
Postcode districts we cover here: BH16 and BH21. You’ll find streets such as Maylyn Road, Old Wareham Road and Blandford Road North, all of which we cover. Close by, we cover Post Green (1 mile south-west), Upton (1 mile south-east), Barrow Hill (1 mile west), Lytchett Minster (1 mile south-west) and Corfe Mullen (2 miles north-east). Within a short drive, we also cover Christchurch (13 miles east), Wimborne Minster (5 miles north-east), Blandford Forum (9 miles north-west), Verwood (11 miles north-east), Ferndown (7 miles north-east) and Swanage (11 miles south).
Local landmarks in Beacon Hill
Locally, our jobs take us to homes close to Upton Infant School, Saint Aldhelm's Church and Lytchett Minster School. Beacon Hill’s nearest station is Hamworthy station, about 2.2 miles south-east of the centre. A little further out are Dolphin Shopping Centre (3.6 miles south-east) and Poole Hospital (3.7 miles south-east). The countryside around Beacon Hill includes Ham Common (LNR) and Stoney Down.
DIY repairs versus a professional job
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
If you are set on a kit, follow its instructions closely, and give it the full curing time. If it fails, we can still put it right.
When a repair is not the answer
It helps to know what we can’t do too:
- Problems we can’t see until an old finish comes off
- Acrylic that moves when you stand in it
- Holes rusted through the metal
Not sure? Send pictures and we’ll give you a straight answer before booking.
Materials we work on in Beacon Hill
- Cast iron baths
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
Repair or replace: which is better?
For a sound bath, resurfacing costs far less than replacement, when you count removal, plumbing, tiling and decorating. It’s also far quicker. Prices start from £350. Set against the cost of replacement, a repair is usually a fraction of the price, because there’s no removal, plumbing or making good. The quote lists exactly what you’re paying for.
Why choose Surface Doctor in Beacon Hill
- We’ll tell you if it’s not worth repairing
- Free fixed quotes from pictures
- Work done at your home or business
- No need to remove anything
See our full price list and resurfacing vs replacement cost guide.
Landlord and trade work in Beacon Hill
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
What we are called out for in Beacon Hill
A dull surface stains and holds dirt, and scrubbing it wears it down further. That’s the point where re-enamelling makes sense.
These are the problems we are asked about most:
- A coloured bath you want in white
- Several chips and rust patches
- A coating lifting around the plughole
- Worn patches where water runs and sits
What to look for in a quote
- The length of the guarantee and what it covers
- Whether there are any call-out or travel charges
- Is the price fixed, and does it include VAT?
- Whether a trained technician does the job
Different materials, different repairs
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported for the finish to last.
About our accreditations · Every repair comes with a one-year guarantee.
