Dorset · England
Bath re-enamelling & resurfacing in Creekmoor, Dorset
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Creekmoor. Free, fixed quotes from your photos.
- Resurfacing from £350
- Thin, worn enamel in places
- An outdated colour you’d like to change
Should you replace it?
When the bathroom is fine apart from the bath’s finish, resurfacing is the simplest answer. Nothing else is disturbed. Prices start from £350. We charge the same wherever you are, so there’s no premium for Creekmoor. The job itself decides the price: how much damage, what it’s made of and how many items.
Why us?
- We come to you, anywhere in the UK
- Usually one visit, start to finish
- One-year guarantee on every repair
- CHAS and Constructionline accredited
Read our prices page or bath cost comparison.
Bath re-enamelling at your home in Creekmoor
Many of the baths we re-enamel are period roll-tops, which are heavy, hard to move and costly to replace. Doing them in place keeps an original feature. We work on Victorian roll-tops, acrylic baths and pressed steel baths, and common reasons people get in touch are a roll-top that’s seen better days and a coating lifting around the plughole.
Big or small, it’s backed by a one-year guarantee.
- Area
- Creekmoor (BH17, BH18)
- Region
- Dorset
- Cover
- 12 months on all our work
- Price
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
When a repair isn’t the answer
Not everything can be repaired, and we’ll tell you before we start. Repairs will not solve:
- A bath that’s rusted through
- Problems we cannot see until an old finish comes off
- A bath split right through the body
If in doubt, send photos and we’ll say what we think.
Surfaces we repair
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
Creekmoor: your questions answered
Will the price change on the day?
Your quote covers the damage in the photos. Anything extra is discussed before we begin.
Can you redo someone else’s repair?
Most of the time. Let us know what was used before and we will plan for it.
Does re-enamelling smell?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
What does bath re-enamelling cost?
Resurfacing from £350. Because every job differs, we price from photos. You will get a fixed figure before booking.
Can you do the outside of a roll-top?
Yes. Inside and out.
How long does re-enamelling take?
One day for most baths and can be used the day after. We give you timings with the quote.
Will there be a smell?
There can be some smell while we work, which is why we ventilate. It clears as the materials cure.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Different materials, different repairs
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
Creekmoor and nearby
Creekmoor is about 2 miles north-west of Poole, in Dorset. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Our repair technicians cover all 462 towns and villages in Dorset.
All of BH17 and BH18 is within our area, from the main roads to the quietest streets. You’ll find streets such as Rugby Road, Linnet Road and Sundew Road, all of which we cover. Nearby, we also work in Upton (1 mile west), Hamworthy (2 miles south), Turlin Moor (2 miles south-west), Beacon Hill (2 miles west) and Corfe Mullen (2 miles north). Larger places within reach include Christchurch (11 miles east), Wimborne Minster (4 miles north), Blandford Forum (10 miles north-west), Verwood (11 miles north-east), Ferndown (6 miles north-east) and Swanage (10 miles south).
What’s near Creekmoor
We visit homes around Parkstone Grammar School, Pocket Park and Hillbourne Primary School. The closest station to Creekmoor is Hamworthy station, roughly 1.5 miles south-west of the centre. A little further out are Brownsea Castle (4.4 miles south-east) and Dolphin Shopping Centre (2.1 miles south-east). For a walk, there’s Beacon Hill and Ham Common (LNR).
- Other local spots include Poole (2.2 miles south-east)
Common problems we fix in Creekmoor
Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
Send us a photo if you notice any of these:
- Lots of chips and rust spots
- A dull, rough surface that won’t come clean
- A period or roll-top bath worth keeping
- A coloured bath you want in white
What to look for in a quote
- How to look after the finish
- How the colour is matched
- Whether cleaning and preparation are in the price
- Whether the price covers travel
How to look after the repair
Much of the damage we repair could have been avoided. A few tips:
- Dry the bath after use to stop limescale
- Use washing-up liquid and a soft cloth
- Don’t leave a chip unrepaired
- Fix dripping taps quickly
Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Fix dripping taps quickly.
Don’t try to scrub a worn bath back to shine. It just wears the enamel further and makes resurfacing more work.
DIY repairs versus a professional job
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
If you are set on a kit, follow its instructions closely, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.
What happens on the day
We work cleanly and quietly, so you can stay at home while we are there. Protection goes down first, then the work takes the best part of a day. Before we leave, we explain how soon it can be used and how to care for it.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Plan for the room to be out of bounds to pets and children
- Have somewhere for us to park nearby if possible
- Ensure the room can be ventilated
Ask for a price
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can give you a fixed quote the same day in most cases.
Advice
For landlords and businesses
Letting agents frequently send us photos straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Landlords, letting agents and housing providers in Creekmoor use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Places near Creekmoor
Other services in Creekmoor
About our accreditations · Every repair comes with a one-year guarantee.
