Bedford Borough · England
Bath Re-enamelling in Turvey
Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in Turvey. Free, fixed quotes from your pictures.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- Brown or grey marks that do not clean off
Honest limits
We won’t take on work that won’t last, so here’s what a repair can’t put right:
- A bath that is rusted through
- Leaking taps or wastes (a plumber’s job)
- A cast iron or steel bath that is cracked right through
If in doubt, send photos and we’ll say what we think.
Materials we repair
- Pressed steel baths
- Acrylic baths
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
Bath re-enamelling in Turvey without replacing anything
Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. The result is a smooth, even, glossy finish. We work on cast iron baths, basins & shower trays and Victorian roll-tops, and the jobs we see most are an old resurfacing that’s failing and a period or roll-top bath worth keeping.
Whatever the size of the job, you get the same one-year guarantee in Turvey and across Bedford Borough.
- Area
- Turvey (MK43)
- Area hub
- Bedford Borough
- Cover
- A year, on every repair
- Price
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
How the visit works
A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and clear up. Allow the best part of a day. Before we go, we’ll explain when it can be used and what to avoid for the first few days.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the day after, the bath is ready.
Before we arrive
- Keep a parking space free if you can
- Open a window if you can
- Tell us if there are stairs or a lift
Get a quote
Pricing is simple: snap the damage close up and then the whole item, send them to us with your postcode, and we will reply with a fixed quote. Quotes are free and no obligation.
Read more
Should you replace it?
When the bathroom is fine apart from the bath’s finish, resurfacing is the simplest answer. Nothing else is disturbed. Our bath re-enamelling starts from £350. A repair usually costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
Why Turvey clients choose us
- Honest advice, even when it means no job
- Colours mixed by hand to suit your surface
- We leave the room as we found it
- Fixed prices from your photos
Take a look at our prices page or bath cost comparison.
What bath re-enamelling costs
Resurfacing from £350. You won’t pay by the hour. The price depends on:
- The material and finish
- How easy the damage is to reach
- Previous DIY repairs that have to come out
- Whether we combine several jobs
Our prices are the same across the UK, with no extra for Turvey. The job itself decides the price: the material, the amount of damage and how many items.
Send photos for a quote
Almost every job we do is priced from pictures. This is what we need:
- Details of any past repairs
- The postcode, so we can plan the visit
- A coin beside the damage so we can judge size
- The material, if you know it
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.
Turvey: your questions answered
What if the damage is worse than the pictures show?
We stop, show you and agree any change before carrying on. You will not be charged for anything you haven’t agreed.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Do you resurface freestanding baths?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
Can I add another job to the visit?
Yes. Doing several items on one visit normally costs less than separate visits. Send pictures of everything you’d like done.
What happens once I’ve sent photos?
We check the damage, the material and your postcode, then reply with a quote with dates.
Is it safe with children and pets around?
Just keep them out of the work area. We’ll tell you when the room can be used again.
Is there a call-out fee?
Travel is included in the price, with the same prices everywhere we work.
Do you work in Turvey?
Yes, we do. We send a technician to Turvey for every job, with no extra charge for travel.
DIY kit or professional repair?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.
For landlords and businesses
Landlords, letting agents and housing providers in Turvey use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
If you manage property in Turvey, we can repair and quote for several addresses together. Send photos for each one and we’ll price them together.
What we are called out for in Turvey
The gloss on enamel is thin, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.
The most common problems we are called about are:
- A bath in a colour that no longer suits
- Chips and rust in more than one place
- A peeling or bubbling previous coating
- Thin, worn enamel in places
Before booking anyone
- Who turns up on the day
- How the room is protected while they work
- What the guarantee covers, and for how long
- Is the price fixed, and does it include VAT?
Other services in Turvey
Our work in Turvey
Turvey is about 6 miles north-west of Kempston, in Bedford Borough. Across the MK43 area, we carry out the work at your property. We work in all 94 towns and villages in Bedford Borough. Our nearest city page is London, about 51 miles away.
Jobs in MK43 are booked in the same way as anywhere else. You’ll find streets such as High Street, Barncroft and The Pyghtle, all of which we cover. We also cover the places around Turvey: Cold Brayfield (1 mile west), Newton Blossomville (1 mile south-west), Lavendon (2 miles west), Carlton (2 miles north) and Chellington (2 miles north-east). Within a short drive, we also cover Bedford (7 miles east), Kempston (6 miles south-east), Cauldwell (7 miles east), Wixams (9 miles south-east), Wootton (6 miles south-east) and Goldington (8 miles east).
Around Turvey
In Turvey, that means homes near Turvey Primary School, Parish Church of All Saints and Three Cranes Public House, among other places. Well-known places in the area include Lavendon (1.8 miles north-west). For a walk, there’s Pavenham Osier Beds.
Repairs by material
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is what we repair.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
About our accreditations · Every repair comes with a one-year guarantee.
