Essex · England
Bath Re-enamelling for Tylerscross homes
Damaged bath in Tylerscross? We put it right where it is, match it on site and guarantee the work for a year.
- Resurfacing from £350
- A roll-top that is seen better days
- A bath in a colour that no longer suits
About our bath re-enamelling in Tylerscross
We do not move the bath, so your taps, tiles and plumbing are left alone. It normally takes one visit, with the bath ready to use the following day. Our technicians work on cast iron baths, basins & shower trays and Victorian roll-tops, and the jobs we see most are worn patches where water runs and sits and chips and rust in more than one place.
Your repair is guaranteed for a year, as with every job we do.
- Where
- Tylerscross (CM19)
- Area hub
- Essex
- Cover
- A year, on every repair
- Price
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
What affects the price in Tylerscross
Resurfacing from £350. You’ll know the full cost before booking. We take into account:
- Where the damage is and how we get to it
- Whether old repairs or coatings need taking off
- What kind of damage it is
- Doing more than one item at once
The price depends on the type and amount of damage, what it’s made of and how many items we do on one visit. We give a fixed price from your pictures, so there are no surprises on the day.
Quotes from your photos
The better the photos, the more accurate the price. Here’s what we find most useful:
- Natural light rather than flash
- A wider photo showing the entire bath
- The material, if you know it
- Where you are, by postcode
To get a price, send a couple of pictures using our quote form or call us. We will say immediately whether it can be repaired.
Towns and villages near Tylerscross
Also in Tylerscross
What happens on the day
The work is clean and fairly quiet, so you can stay at home while we are there. Protection goes down first, then the job itself takes a full day. At the end we talk you through how soon it can be used and how to look after it.
- We mask and protect the room and ventilate it.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- Once cured, normally by the day after, the bath is ready.
Before we arrive
- Tell us about any previous repairs or coatings
- Ensure the room can be ventilated
- Move bottles, mats and clutter away from the area
Ask for a price
There is no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Read more
Covering Tylerscross
Tylerscross is about 3 miles south-west of Harlow, in Essex. We agree a date that works for you, and we’ll give you an arrival time in advance, so there’s no waiting around. Tylerscross is one of 644 towns and villages in Essex we cover. Our nearest city page is London, about 19 miles away.
We cover every part of the CM19 postcode area and the streets around it. From Water Lane and Epping Road or anywhere nearby, a technician can come to you. Nearby, we also work in Broadley Common (1 mile south), Halls Green (1 mile north-west), Nazeing (1 mile south-west), Roydon Hamlet (1 mile west) and Great Parndon (1 mile north-east). Within a short drive, we also cover Harlow (3 miles north-east), Brentwood (14 miles south-east), Loughton (7 miles south), Waltham Abbey (5 miles south-west), Great Dunmow (15 miles north-east) and Epping (4 miles south-east).
Near you in Tylerscross
Locally, our jobs take us to homes close to Water Lane Primary Academy, Church of All Saints and Black Swan Public House. Nearby too are Nazeing Triangle (0.9 miles south-west) and Stewards Academy - Science Specialist (1.4 miles east). The nearest railway station is Roydon station, about 2 miles north-west. Nearby you’ll also find Princess Alexandra Hospital (1.9 miles north-east) and Nazeing Glass Museum (2.7 miles west). Open spaces near Tylerscross include Hunsdon Mead and Cheshunt Lake.
Landlord and trade work in Tylerscross
Builders use us to fix snagging damage before handover. Several plots can be done in one visit to keep costs down.
Letting agents often send us photos straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
How to care for the repair
So the finish stays in good condition for years:
- Leave the bath for the full curing time before using it
- Avoid suction-cup mats
- Get any chip repaired quickly
- Wipe the bath dry after use in hard water areas
Rinse the bath and wipe it over after use, particularly where water is hard, so limescale cannot build up.
Rust spots on a worn bath get worse with time. Resurfacing before they spread keeps it simpler.
Questions from Tylerscross
What happens if you find more damage?
Your quote covers the damage in the photos. If there’s more, we will tell you before starting.
What happens next?
We check the damage, the material and your postcode, then reply with a quote.
Can you quote from pictures?
In nearly every case. We only ask to see it in person if the pictures cannot show what we need.
Do you do work for letting agents?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit generally costs less than separate visits. Include photos of each item.
Is the work guaranteed?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
How long is the bath unusable?
Normally one day, with the bath ready the following day. A badly pitted bath can need a second day.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
DIY kit or professional repair?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is generally the cheaper route.
When a repair is not the answer
Not everything can be repaired, and we’d rather say so up front. We can’t fix:
- Leaking taps or wastes (a plumber’s job)
- Damage hidden under a previous coating, until it’s stripped back
- A poorly supported acrylic bath, until it’s firmed up
Not sure? Send photos and we will give you a straight answer.
Materials we repair
- Basins & shower trays
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
Materials and what they mean for the repair
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is the part we put right.
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Signs you need bath re-enamelling in Tylerscross
Previous coatings can fail too, lifting by the plughole or blistering. We strip what’s failing and start again.
If you can see any of these, send us a photo:
- Worn patches where water runs and sits
- A bath that stays dull however much you clean it
- A coloured bath you want in white
- Lots of chips and rust spots
Comparing quotes
- What happens if the damage is worse than the photos show
- How to care for the finish
- What protection goes down before work starts
- Who turns up on the day
About our accreditations · Every repair comes with a one-year guarantee.
