Swansea · Wales
Bath Re-enamelling in Tyn-y-cwm
Full bath re-enamelling and resurfacing for homes and businesses in Tyn-y-cwm and across Swansea. Free, fixed quotes from your pictures.
- Resurfacing from £350
- Worn patches where water runs and sits
- An old resurfacing that is failing
Bath re-enamelling in Tyn-y-cwm without replacing anything
When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. There is no removal, plumbing or tiling involved. We regularly repair cast iron baths, Victorian roll-tops and basins & shower trays, and common reasons people contact us are lots of chips and rust spots and a peeling or bubbling previous coating.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Location
- Tyn-y-cwm (SA5)
- Area hub
- Swansea
- Cover
- A year, on every repair
- Quote
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Different materials, different repairs
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s what we repair.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
About Tyn-y-cwm
Tyn-y-cwm is about 4 miles north-east of Gorseinon, in Swansea. Book a date that suits you, and we’ll give you an arrival time in advance, so there’s no waiting around. Tyn-y-cwm is one of 153 towns and villages in Swansea where we work.
Postcode districts we cover here: SA5. Close by, we cover Felindre (1 mile east), Llwyncelyn (2 miles east), Rhyd-y-gwin (3 miles east), Craig-cefn-parc (3 miles east) and Garnswllt (4 miles north). Larger places within reach include Swansea (5 miles south), Castle (6 miles south), Morriston (3 miles south-east), Mount Pleasant (6 miles south), Gorseinon (4 miles south-west) and Dyfaty (6 miles south).
Near you in Tyn-y-cwm
Around Tyn-y-cwm, we work in homes near Shepherds Arms and Pontarddulais Comprehensive School. Tyn-y-cwm’s nearest station is Pontarddulais station, roughly 2.8 miles west of the centre. Nearby you’ll also find Morriston Hospital (2.7 miles south-east) and Hughs Castle (2.8 miles west). For a walk, there’s Mynydd Pysgodlyn and Cwm Clydach RSPB Reserve.
What happens on the day
We work cleanly and quietly, so you can carry on at home. We protect the area first, then the work takes a full day. At the end we talk you through the curing time and the aftercare.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Point us to the nearest place to park
- Make sure the room can be ventilated
- Plan for the room to be out of bounds to pets and children
Getting a price
The quickest way to a price is to send a couple of pictures using our quote form or ring us. We’ll say right away if a repair is the right fix.
Related advice
Honest limits
Before you book, it’s worth knowing the limits too:
- Damage hidden under a previous coating, until it’s stripped back
- An acrylic bath that flexes badly underfoot
- Leaks from fittings rather than the bath
Send us pictures and we’ll tell you honestly before you book.
Surfaces we repair
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
Questions from Tyn-y-cwm
Can a failed resurfacing be redone?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Can you repair several things at once?
Of course, and it typically saves money. Send pictures of everything together and you’ll get one combined price.
What if the damage is worse than the pictures show?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
Can you do the outside of a roll-top?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
Can you repair something that’s been repaired before?
Most of the time. Let us know what was used before and we will plan for it.
Do you do work for letting agents?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
Will there be fumes?
Some odour is normal while we spray, so we ventilate the room. It fades as the coating cures.
Aftercare tips
To keep it looking its best:
- Clean with a soft cloth and mild detergent
- A dripping tap should be fixed promptly
- Keep toiletries on a shelf rather than in the bath
- Never use suction bath mats
Wipe the bath dry after use where you can, and rinse away any product left on the surface.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface and makes resurfacing more work.
Also near Tyn-y-cwm
What else we do in Tyn-y-cwm
Do you need bath re-enamelling in Tyn-y-cwm?
Often the bath has just had decades of use, and only the surface is worn. Underneath, a cast iron or steel bath is generally as strong as ever.
Keep an eye out for any of the following:
- An old resurfacing that is failing
- Stains that will not shift
- A period or roll-top bath worth keeping
- A coloured bath you want in white
What your quote should include
- Aftercare advice
- Whether there are any call-out or travel charges
- Whether they match the colour on site
- Who turns up on the day
DIY kit or professional repair?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.
Work for landlords and builders
Landlords, letting agents and housing providers in Tyn-y-cwm use us as well as homeowners. Repairing between tenancies keeps void periods short, and it typically costs far less than a refit.
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.
Repairing versus replacing in Tyn-y-cwm
If the bath is sound, re-enamelling is normally much cheaper than replacing it, when you count removal, plumbing, tiling and decorating. It’s also far quicker. Our bath re-enamelling starts from £350. Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
Why Tyn-y-cwm customers choose us
- Free fixed quotes from pictures
- Colour-matched on site
- CHAS, Constructionline and SafeContractor accredited
- We’ll tell you if it’s not worth repairing
Read our prices page and bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
