Worcestershire · England
Bath Re-enamelling for Upper Bentley homes
Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in Upper Bentley. Free, fixed quotes from your pictures.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- An outdated colour you’d like to change
Our work in Upper Bentley
Upper Bentley is about 3 miles west of Redditch, in Worcestershire. Our technicians come to homes and businesses in Upper Bentley, so nothing has to leave your home. Upper Bentley is one of 376 places in Worcestershire we cover. Our nearest city page is Birmingham, about 13 miles away.
Our visits in B97 work the same way as everywhere else we cover. That includes homes on Angel Street, Manor Road and Black Lake Lane and the roads around them. Nearby, we also work in Lower Bentley (1 mile west), Woodgate (2 miles west), Sharpway Gate (3 miles west), Hanbury (3 miles south-west) and Bradley Green (3 miles south). Further out, we also cover Worcester (11 miles south-west), Redditch (3 miles east), Kidderminster (12 miles north-west), Bromsgrove (4 miles north-west), Droitwich Spa (7 miles west) and Evesham (14 miles south).
What’s near Upper Bentley
Around Upper Bentley, we work in homes near St. Mary's. The nearest railway station is Bromsgrove station, about 2.7 miles north-west. Well-known places in the area include Redditch Local History Museum (2.8 miles east) and Kingfisher Shopping Centre (2.8 miles east). Open spaces near Upper Bentley include Christopher Cadbury Wetland Reserve.
How we handle bath re-enamelling in Upper Bentley
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. Common call-outs are for a peeling or bubbling previous coating and enamel that’s lost its shine and feels rough, in pressed steel baths, cast iron baths and Victorian roll-tops.
You get a one-year guarantee, the same in Upper Bentley as everywhere else we work.
- Area
- Upper Bentley (B97)
- Region
- Worcestershire
- Guarantee
- A year, on every repair
- Quote
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Places near Upper Bentley
What else we do in Upper Bentley
Repair or replace: which is better?
Replacing a bath typically involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and usually one day, with the bath ready the following day. Resurfacing from £350, with every job priced individually. Set against the cost of replacement, repairing generally costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Why book with us
- One price list for the entire UK
- We come to you, anywhere in the UK
- CHAS, Constructionline and SafeContractor accredited
- We leave the room as we found it
Take a look at our prices page and resurfacing vs replacement cost guide.
Prices and what affects them
Resurfacing from £350. There’s no charge for travel to Upper Bentley. The price depends on:
- What the surface is made of
- Any earlier repairs that need removing first
- How many items we do on one visit
- How hard the colour is to match
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Send photos for a quote
A couple of clear pictures is all it takes. It helps if you send:
- A coin or ruler next to the damage for scale
- Any earlier repairs or coatings
- A clear, close picture of the problem area
- The material, if you know it
There is no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
How to look after the repair
To keep it looking its best:
- A dripping tap should be fixed promptly
- A quick wipe after use keeps limescale away
- Wash away dyes and oils after use
- Don’t leave bottles, razors or sponges standing on the surface
Rinse away dyes, oils and bath bombs straight after use, as they can stain. Repair dripping taps promptly.
If a previous coating is starting to peel, don’t pick at it. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
Work for landlords and builders
Housing associations and facilities teams use us for planned and reactive repairs in Worcestershire and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
How it works
Expect a friendly, tidy visit. We agree the arrival time in advance, cover and mask the work area, then carry out the work, which usually takes most of the day. If anything looks different from your pictures, we’ll talk to you before going ahead.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- Once cured, normally by the day after, the bath is ready.
Preparing for the visit
- Let us know about parking or access
- Open a window if you can
- Tell us about any previous repairs or coatings
Ask for a price
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.
Read more
DIY repairs versus a professional job
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Honest limits
We’ll always be straight with you, so here’s what a repair can’t fix:
- A cast iron or steel bath that’s cracked right through
- Damage hidden under a previous coating, until it’s stripped back
- Steel that has corroded right through
If in doubt, send photos and we’ll say what we think before you book.
What we work on
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
Upper Bentley: your questions answered
Is there any odour?
It depends on the job, but often a little. Open windows and an extractor fan help.
How long does re-enamelling last?
A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.
How long will the bath be out of use?
Normally a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
Does re-enamelling smell?
A little, during the work. We set up ventilation and the smell fades as it cures.
Do you do work for letting agents?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses across Worcestershire.
Can a failed resurfacing be redone?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
How much does bath re-enamelling cost in Upper Bentley?
Resurfacing from £350. Every job gets a fixed price from your pictures. Send a close-up and a picture of the entire item and your postcode.
What happens once I’ve sent pictures?
You’ll get a fixed quote back, usually with dates to choose from. There is no obligation to book.
Different materials, different repairs
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
About our accreditations · Every repair comes with a one-year guarantee.
