Staffordshire · England
Bath Re-enamelling in Upper Leigh
Bath re-enamelling in and around Upper Leigh: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- A peeling or bubbling previous coating
- A bath that stays dull however much you clean it
Where we work around Upper Leigh
Upper Leigh is about 4 miles south of Cheadle, in Staffordshire. Anywhere in ST10, we come to you. Upper Leigh is one of 512 towns and villages in Staffordshire where we work. Our nearest city page is Birmingham, about 32 miles away.
Our repair technicians cover all of the ST10 postcode area and the streets around it. Nearby, we also work in Lower Leigh (1 mile south-east), Church Leigh (1 mile south-east), Lower Tean (1 mile north), Checkley (2 miles north-east) and Withington (2 miles south-east). Further out, we also cover Stafford (10 miles south-west), Newcastle-under-Lyme (12 miles north-west), Longton (7 miles north-west), Rugeley (12 miles south), Stone (7 miles west) and Leek (13 miles north).
Landmarks near Upper Leigh
Our customers here include homes close to The Star pub, Church of All Saints and All Saints' CofE First School. For rail, the closest station is Blythe Bridge station, about 4.5 miles north-west. Well-known places in the area include Chartley Castle (4.9 miles south) and Cheadle Hospital (4.1 miles north).
Bath re-enamelling in Upper Leigh, done in place
If your bath is sound but looks tired, re-enamelling is typically the most cost-effective option. It avoids removal, plumbing and re-tiling. We regularly repair basins & shower trays, Victorian roll-tops and pressed steel baths, and people most often call us about brown or grey marks that don’t clean off and a roll-top that’s seen better days.
Big or small, it’s backed by a one-year guarantee.
- Location
- Upper Leigh (ST10)
- County
- Staffordshire
- Cover
- One year on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
How to look after the repair
Simple care helps the repair last. Our advice:
- Keep toiletries on a shelf rather than in the bath
- Don’t leave a chip unrepaired
- Never use suction bath mats
- Wash away dyes and oils after use
Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Places near Upper Leigh
What else we do in Upper Leigh
The process
We begin by going over the job with you, so you know exactly what we are doing. Then the area is sheeted and masked and we start. Allow the best part of a day, and we’ll keep you posted as we go.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- Once cured, normally by the following day, the bath is ready.
Before we arrive
- Move bottles, mats and clutter away from the area
- Let the surface dry out before the visit
- Open a window if you can
How to get a price
Getting a price is easy: snap the damage close up and then the entire item, send them to us with your postcode, and we will reply with a fixed quote. There’s no charge for the quote and you are under no obligation.
Read more
Honest limits
Not everything can be repaired, and we’ll tell you before we start. We cannot fix:
- Problems we can’t see until an old finish comes off
- Steel that has corroded right through
- A bath split right through the body
Not sure? Send photos and we’ll give you a straight answer.
What we work on
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
Common problems we fix in Upper Leigh
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. We strip what’s failing and start again.
If you can see any of these, send us a photo:
- Worn patches where water runs and sits
- A period or roll-top bath worth keeping
- Stains that won’t shift
- Several chips and rust patches
Comparing quotes
- Whether they match the colour on site
- What the guarantee covers, and for how long
- Whether the price covers travel
- How soon you can use it again
Can I fix it myself?
If you are set on a kit, follow its instructions closely, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
FAQs for Upper Leigh
What happens after I send photos?
We look at the photos and reply with a fixed quote and some dates. If anything’s unclear, we will ask for another photo.
Can you do the outside of a roll-top?
Yes, frequently. The inside is resurfaced, and we can refinish the outside as well.
Do you work for landlords and businesses?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
What do you need from me?
Send pictures through the quote form or call 0345 017 0787, and we will do the rest.
I’m a tenant. Can you help?
Yes, but check with your landlord or agent first. Landlords are often glad to have it sorted.
Do you work in Upper Leigh?
We do. Technicians travel to Upper Leigh from across the region, and the price is the same as everywhere else.
Can you fix a peeling bath coating?
Usually, yes. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
Will the bath be moved?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
Landlords, agents and businesses in Upper Leigh
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
Letting agents frequently send us pictures straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Prices and what affects them
Resurfacing from £350. Prices are worked out job by job. The main factors are:
- The colour and finish to match
- The type of damage
- Access to the area
- Any earlier repairs that need removing first
The price depends on the type and amount of damage, what it’s made of and how many items we do on one visit. You get a fixed price from your pictures, so there are no surprises on the day.
Getting a price from pictures
Two or three clear photos are normally enough. It helps if you send:
- Your postcode, so we can check dates
- The material, if you know it
- Good light, ideally daylight, without flash glare
- A wider photo showing the whole bath
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job.
Different materials, different repairs
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is the part we put right.
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. The bath needs to be firm and well supported.
About our accreditations · Every repair comes with a one-year guarantee.
