Warwickshire · England
Bath Re-enamelling for Upper Tysoe homes
Problem with your bath in Upper Tysoe? We repair it in place, mix the colour on the day and back it with a one-year guarantee.
- Resurfacing from £350
- Chips and rust in more than one place
- A roll-top that is seen better days

Should I try a DIY kit first?
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
Bath re-enamelling in Upper Tysoe, done in place
We do not move the bath, so your taps, tiles and plumbing are left alone. Most baths are done in one visit, with the bath ready to use the following day. If you are dealing with brown or grey marks that don’t clean off and a coating lifting around the plughole, we can help, whatever the material.
Every repair comes with a one-year guarantee.

- Location
- Upper Tysoe (CV35)
- Area hub
- Warwickshire
- Warranty
- One year on every repair
- Price
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Repair or replace in Upper Tysoe?
There are times replacing is better: if the bath is cracked through, if you want a different size or shape, or if you’re refitting the entire room anyway. In most other cases, resurfacing is the better choice. Prices start from £350. There are no surprise extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Why choose Surface Doctor in Upper Tysoe
- CHAS, Constructionline and SafeContractor accredited
- A fixed quote before booking
- We leave the room as we found it
- One-year guarantee on every repair
Read our pricing and resurfacing vs replacement cost guide.
Towns and villages near Upper Tysoe
More services for Upper Tysoe
Common questions in Upper Tysoe
Can I add another job to the visit?
Yes, and it’s frequently cheaper. Send pictures of everything together and we will quote them together.
Can you do the outside of a roll-top?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
How do I get a price for bath re-enamelling in Upper Tysoe?
Prices start from £350. Because every job differs, we price from pictures. You’ll get a fixed figure before you book.
Is it worth repairing rather than replacing?
Usually, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we’ll say so.
What do you need from me?
Some photos, your postcode and how to reach you. On the day, access to the room.
How long is the bath unusable?
Most baths are done in a day and can be used the day after. We give you timings with the quote.
Are there extra charges for Upper Tysoe?
No. Our quotes include travel, with the same prices everywhere we work.
Do the materials smell?
It depends on the job, but frequently a little. Open windows and an extractor fan help, and it soon fades.
How we price bath re-enamelling
Resurfacing from £350. Prices are worked out job by job, from your pictures. What matters most is:
- How many areas need work
- The colour and finish to match
- The material and finish
- How easy the damage is to reach
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send photos and we’ll give you the exact figure.
How to get a fixed quote
Almost every job we do is priced from pictures. This is what we need:
- Any earlier repairs or coatings
- A wider photo showing the whole bath
- Good light, ideally daylight, without flash glare
- The postcode, so we can plan the visit
The quickest way to a price is to send a couple of pictures through our quote form or ring us. We’ll tell you honestly if a repair is the right fix.
The process
We begin by going over the job with you. After that, protection goes down around the work area and we start. You can expect it to take most of the day, and we will keep you posted as we go.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- Once cured, normally by the next day, the bath is ready.
Getting ready for the visit
- Make sure the area is dry
- Clear the area around the damage
- Have a window or extractor fan available
Get a quote
Most clients in Upper Tysoe get their price from pictures. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
Advice
Looking after it afterwards
To keep it looking its best:
- Keep suction mats out of the bath
- Stick to gentle, non-abrasive cleaners
- A dripping tap should be fixed promptly
- Leave the bath for the full curing time before using it
Rinse the bath and wipe it over after use, particularly where water is hard, to stop limescale building up.
On a worn bath, rust spots keep spreading and make the job bigger. It’s simpler to resurface before they spread.
Honest limits
We’d rather lose a job than do one that will not last, so here’s what a repair cannot put right:
- Damage hidden under a previous coating, until it’s stripped back
- An acrylic bath that flexes badly underfoot
- Leaks from fittings rather than the bath
If in doubt, send photos and we will say what we think before you book.
Materials we repair
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
- Cast iron baths
Different materials, different repairs
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. It must be solid and not flex underfoot.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s what we repair.
Covering Upper Tysoe
Upper Tysoe is about 7 miles west of Banbury, in Warwickshire. Jobs in Upper Tysoe are booked in like any other job: a fixed price from your pictures, and a technician at your door on the day. We cover 324 places in Warwickshire, from the larger towns to small villages. Our jobs stretch from Upper Tysoe to Birmingham (31 miles away).
Our visits in CV35 work the same way as everywhere else we cover. That includes homes on Main Street, Old Tree Lane and Baldwins Lane. We also cover the places around Upper Tysoe: Middle Tysoe (1 mile north-east), Whatcote (2 miles west), Upper Brailes (3 miles south-west), Lower Brailes (3 miles south-west) and Idlicote (3 miles west). Further out, we also cover Warwick (13 miles north), Royal Leamington Spa (14 miles north), Stratford-upon-Avon (11 miles north-west), Leamington Spa (14 miles north), Southam (12 miles north-east) and Shipston-on-Stour (5 miles west).
Around Upper Tysoe
Locally, our jobs take us to homes close to Tysoe CofE Primary School, Church of the Assumption of the Blessed Virgin Mary and Peacock Inn and the streets around them. Other landmarks nearby include King John's Castle (4.5 miles north) and Ellen Badger Hospital (5.1 miles west). Open spaces near Upper Tysoe include Woodford Bottom and Lamb's Pool and Edge Hill.
Common problems we fix in Upper Tysoe
In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.
These are the problems we’re asked about most:
- A bath that stays dull however much you clean it
- Wear marks under the taps
- A bath in a colour that no longer suits
- An original cast iron bath that needs restoring
Questions to ask before you book
- How changes to the job are handled
- Whether the price is fixed and includes VAT
- How your room will be protected
- How to care for the finish
About our accreditations · Every repair comes with a one-year guarantee.

