Hampshire · England

Bath re-enamelling & resurfacing in Upper Wield, Hampshire

Bath re-enamelling across Upper Wield and nearby, done in a single visit in most cases.

  • Resurfacing from £350
  • Stains that won’t shift
  • Wear marks under the taps
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling in Upper Wield

How we handle bath re-enamelling in Upper Wield

The bath stays where it is, so the taps, tiles and plumbing aren’t touched. Most baths are done in one visit, and can be used again the day after. Our repair technicians work on acrylic baths, basins & shower trays and Victorian roll-tops, and people most often call us about lots of chips and rust spots and a period or roll-top bath worth keeping.

Your repair is guaranteed for a year, as with every job we do.

Technician in a mask working on a freestanding roll-top bath
Area
Upper Wield (SO24)
Area hub
Hampshire
Warranty
One year on every repair
Quote
From £350. Free and fixed, from your photos
Call
0345 017 0787
Last updated
23 October 2026

Should I try a DIY kit first?

If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.

If you’re set on a kit, follow its instructions closely, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.

Keeping it looking good

So the finish stays in good condition:

  • Wash away dyes and oils after use
  • Wipe the bath dry after use in hard water areas
  • Respect the curing time we give you
  • Fix dripping taps quickly

Dry the bath after use if possible, particularly with hard water, and rinse off any bath products.

Rust spots on a worn bath get worse with time and make the job bigger. Resurfacing before they spread keeps it simpler.

What affects the price in Upper Wield

Prices start from £350. Every quote is fixed and free. What we take into account:

  • The colour and finish to match
  • Whether we combine several jobs
  • The material
  • How many areas need work

Our prices are the same across the UK, so there’s no premium for Upper Wield. The job itself decides the price: the material, the amount of damage and how many items.

Quotes from your photos

Two or three clear pictures are usually enough. Try to include:

  • A photo taken from further back
  • Natural light rather than flash
  • Something in shot to show the size
  • The material, if you know it

For a price in Upper Wield, photos are the quickest way: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.

How it works

On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job normally takes a full day. We tidy up before we leave and tell you when it’s ready to use.

  1. We sheet, mask and ventilate the room.
  2. Old sealant is cut out and the bath is deep cleaned.
  3. We repair chips, rust spots and pitting.
  4. We key the bath and apply a bonding primer.
  5. The new finish is sprayed on in several coats and left to cure until the next day.

How to prepare

  • Mention any parking restrictions or tricky access
  • Mention if the room is upstairs or in a flat
  • Point us to the nearest place to park

Ask for a price

Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can price the job without visiting.

Get a fixed quote

Advice

Our work in Upper Wield

Upper Wield is about 5 miles west of Alton, in Hampshire. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. We work in 683 places across Hampshire. Our jobs stretch from Upper Wield to London (about 50 miles away).

All of SO24 is within our area, from the main roads to the quietest streets. Other places close to Upper Wield include Preston Candover (2 miles north-west), Bighton (3 miles south-west), Brown Candover (3 miles west), Totford (4 miles west) and Old Alresford (4 miles south-west). Further out, we also cover Basingstoke (8 miles north), Winchester (11 miles south-west), Fleet (14 miles north-east), Alton (5 miles east), Petersfield (12 miles south-east) and Tadley (15 miles north).

Local landmarks in Upper Wield

Our clients here include homes close to The Yew Tree pub and Church of St James and the streets around them. A little further out are Barton Castle (0.7 miles south-west) and Alton Community Hospital (4.8 miles east). For a walk, there’s King's Hill.

Map of Upper Wield © OpenStreetMap contributors

Common problems we fix in Upper Wield

A dull surface stains and holds dirt, and scrubbing it wears it down further. At that stage, resurfacing is the fix.

Most people contact us when they notice something like this:

  • Brown or grey marks that don’t clean off
  • A bath that stays dull however much you clean it
  • A coating lifting around the plughole
  • A coloured bath you want in white

What your quote should include

  • What happens if they find more damage
  • How long the guarantee is and what it covers
  • What protection goes down before work starts
  • Aftercare advice

How to compare quotes

Landlords, agents and businesses in Upper Wield

We work for landlords, letting agents and housing providers in Upper Wield as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.

Housing associations and facilities teams use us for planned and reactive repairs in Hampshire and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.

Different materials, different repairs

Pressed steel

Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.

Roll-top and period baths

We can resurface a roll-top inside and out, and the outside can be refinished too.

Upper Wield questions

Is my repair covered?

Yes, for a year. If there is a problem with the work in that time, we come back and put it right.

Can a failed resurfacing be redone?

Yes. Stripping the old coating adds time, so it’s reflected in the quote.

Can landlords book you?

Yes, often. We can quote for several properties together and work between tenancies.

Can you repair something that’s been repaired before?

In most cases. We remove the old repair before doing a new one.

Can you do the outside of a roll-top?

Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.

How long does re-enamelling last?

It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.

Will the price change on the day?

It’s rare, but if it happens we talk to you first. The price only changes if you agree.

Is it worth repairing rather than replacing?

Generally, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we’ll tell you.

Why repair rather than replace?

Replacing a bath can take several days across several trades. Re-enamelling is one technician, normally one day, and the bath is usable the day after. Resurfacing from £350, with every job priced individually. What it costs depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. You get a fixed price from your pictures, so you know the cost before booking.

What you get with us

  • We leave the room as we found it
  • Accredited with CHAS, Constructionline and SafeContractor
  • Everything repaired in place
  • One price list for the whole UK

Read our prices page or guide to resurfacing and replacement costs.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.