Cumbria · England
Bath Re-enamelling for Upperby homes
Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in Upperby. Send pictures for a free, fixed quote.
- Resurfacing from £350
- An old resurfacing that is failing
- Staining under the taps and around the waste
Honest limits
We will not take on work that won’t last, so here’s what a repair can’t put right:
- Steel that has corroded right through
- Leaks from fittings rather than the bath
- Problems we can’t see until an old finish comes off
Not sure? Send pictures and we’ll give you a straight answer.
Surfaces we repair
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
Bath re-enamelling in Upperby without replacing anything
The bath stays where it is, so your taps, tiles and plumbing are left alone. It generally takes one visit, with the bath ready to use the following day. Common call-outs are for several chips and rust patches and brown or grey marks that don’t clean off, across basins & shower trays, pressed steel baths and Victorian roll-tops.
Every job is backed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.
- Location
- Upperby (CA2, CA1, CA4)
- County
- Cumbria
- Guarantee
- 12 months on all our work
- Price
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Do you need bath re-enamelling in Upperby?
By the time a bath is a few decades old, it may have a mix of issues: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.
Keep an eye out for any of the following:
- An old resurfacing that is failing
- Worn patches where water runs and sits
- Lots of chips and rust spots
- A dull, rough surface that will not come clean
Comparing quotes
- How long the guarantee is and what it covers
- How your room will be protected
- Whether there are any call-out or travel charges
- Who turns up on the day
Repair or replace: which is better?
There are times replacing is better: if the bath is cracked through, if you want a different size or shape, or if you are refitting the entire room anyway. In most other cases, resurfacing is the better choice. Prices start from £350. We do not add extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
Why choose Surface Doctor in Upperby
- Free fixed quotes from pictures
- We’ll tell you if it’s not worth repairing
- CHAS and Constructionline accredited
- A year’s guarantee on all work
See our full price list and guide to resurfacing and replacement costs.
About Upperby
Upperby is about 1 mile south-east of Carlisle, in Cumbria. Jobs in Upperby are booked in like any other job: a fixed quote from pictures, and a technician at your door on the day. Upperby is one of 438 places in Cumbria where we work. We work right across the region, from Upperby to Newcastle upon Tyne (52 miles away).
We cover every part of CA2, CA1 and CA4. Whether you live on Baird Road, Meade Road and Manor Road or anywhere nearby, we can come to you. If you are just outside Upperby, we cover Botcherby (1 mile north), Blackwell (1 mile south-west), Harraby (1 mile north-east), Currock (1 mile north-west) and Durdar (1 mile south). Further out, we also cover Wigton (10 miles west), Belle Vue (3 miles north-west), Brampton (9 miles north-east), Fair Hill (15 miles south-east), Etterby (3 miles north-west) and Longtown (10 miles north).
Landmarks near Upperby
Around Upperby, we work in homes near St John's, St John Henry Newman Catholic School and Upperby Primary School. The nearest railway station is Carlisle station, about 1.3 miles north of the centre. Other landmarks nearby include Carlisle Cathedral Treasury Museum (1.7 miles north-west) and Carlisle Castle (1.9 miles north-west).
- Other local spots include County Borough of Carlisle (1.6 miles north)
Different materials, different repairs
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel frequently rusts by the plughole, so we pay close attention there.
What bath re-enamelling costs
Resurfacing from £350. We don’t charge extra for travel to Upperby. The price comes down to:
- Doing more than one item at once
- Previous DIY repairs that have to come out
- What the surface is made of
- How hard the colour is to match
No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Getting a price from photos
Most quotes are done from photos alone. To make it quick:
- Daylight if possible, and no flash reflection
- Any details about the material
- Details of any past repairs
- A close-up of the damage, in focus
Most customers in Upperby get their price from pictures. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
FAQs for Upperby
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
How long is the bath unusable?
Most baths are done in a day, ready the next day. We give you timings with the quote.
Do you do work for letting agents?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
Can you price it without visiting?
Typically, yes. Clear pictures let us give you a fixed price without visiting.
How much does bath re-enamelling cost in Upperby?
Prices start from £350. Because every job differs, we price from pictures. You know the full cost before anything is booked.
Is it safe with children and pets around?
Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.
Is there a smell?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It clears as the finish cures.
It’s been repaired before. Can you still fix it?
Generally, yes. Let us know what was used before and we will plan for it.
How to care for the repair
Much of the damage we repair could have been avoided. A few tips:
- Dry the bath after use to stop limescale
- Keep toiletries on a shelf rather than in the bath
- Rinse off hair dye, oils and bath bombs immediately
- Keep suction mats out of the bath
Rinse away dyes, oils and bath bombs straight after use, as they can stain. Repair dripping taps promptly.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
What we do, step by step
Nothing needs to be moved out of the room beforehand. Everything we use comes in the van with us, lay protective sheets and get going once we have agreed what we’re doing. Most jobs take a full day, and you’re welcome to carry on with your day while we work.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the day after.
Getting ready for the visit
- Clear the area around the damage
- Ensure the room can be ventilated
- Let us know which floor the room is on
Getting a price
To get a price, send a couple of photos using our quote form or call us. We’ll tell you honestly whether it can be repaired.
Read more
Should I try a DIY kit first?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
Other services in Upperby
About our accreditations · Every repair comes with a one-year guarantee.
