Cheshire West and Chester · England
Bath Re-enamelling for Upton-by-Chester homes
Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in Upton-by-Chester. Free, fixed quotes from your pictures.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- A dull, rough surface that will not come clean
What bath re-enamelling costs
Prices start from £350. We price every job individually. The main factors are:
- How many areas need work
- Whether it’s a chip, crack, burn or wear
- How hard the colour is to match
- Previous DIY repairs that have to come out
A repair is priced on what needs doing, not where you live. You will see the full price before booking.
Getting a price from pictures
We price nearly every job from pictures. This is what we need:
- Your postcode, so we can check dates
- Natural light rather than flash
- A coin beside the damage so we can judge size
- Any earlier repairs or coatings
Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and you will get a fixed quote back. Quotes are free and no obligation.
Bath re-enamelling at your home in Upton-by-Chester
We do not move the bath, so your taps, tiles and plumbing are left alone. It normally takes one visit, with the bath ready to use the following day. We work on pressed steel baths, basins & shower trays and acrylic baths, and common reasons people contact us are stains that won’t shift and lots of chips and rust spots.
Every job is backed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.
- Where
- Upton-by-Chester (CH2)
- Area hub
- Cheshire West and Chester
- Cover
- One year on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Different materials, different repairs
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Towns and villages near Upton-by-Chester
Also in Upton-by-Chester
Keeping it looking good
Simple care helps the repair last. Our advice:
- Leave the bath for the full curing time before using it
- Get any chip repaired quickly
- Stick to gentle, non-abrasive cleaners
- Dry the bath after use to stop limescale
Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. It’s simpler to resurface before they spread.
When we would advise against a repair
Before you book, it’s worth knowing the limits:
- Anything hidden under an old coating, until we remove it
- A bath that is rusted through
- A bath split right through the body
Not sure? Send pictures and we’ll give you a straight answer before you book.
Materials we work on in Upton-by-Chester
- Basins & shower trays
- Acrylic baths
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
Landlord and trade work in Upton-by-Chester
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.
We are used to working with agents and managing companies. Send the address, photos and access details.
Upton-by-Chester and the surrounding area
Upton-by-Chester is about 1 mile north of Chester, in Cheshire West and Chester. We travel to clients in Upton-by-Chester and the surrounding area, so there’s no workshop to go to. Our repair technicians cover all 224 towns and villages across Cheshire West and Chester. Our jobs stretch from Upton-by-Chester to Liverpool (about 13 miles away).
Postcode districts we cover here: CH2. You’ll find streets such as Mill Lane, Iver Road and Upton Lane, all of which we cover. If you’re just outside Upton-by-Chester, we cover Bache (1 mile south-west), Newton (1 mile east), Moston (1 mile north-west), Newtown (1 mile south) and Hoole Bank (1 mile east). We also work in nearby towns such as Ellesmere Port (4 miles north), Winsford (15 miles east), Northwich (15 miles east), Neston (9 miles north-west), Frodsham (9 miles north-east) and Whitby (4 miles north).
Around Upton-by-Chester
In Upton-by-Chester, that means homes near Holy Ascension Church, Upton Westlea Primary School and Dorin Park School and the streets around them. Nearby too are The Oak Tree pub (0.5 miles west), Grosvenor Park (1.6 miles south) and Upton-by-Chester High School (0.6 miles east). The closest station to Upton-by-Chester is Bache station, about 0.5 miles south-west of the centre. Other landmarks nearby include Countess of Chester Hospital (0.7 miles south-west) and Phoenix Tower (1.4 miles south). Green spaces nearby include Gowy Meadows Nature Reserve.
- Parks and local facilities nearby include Chester (2.1 miles south)
Why repair rather than replace?
Replacing a bath can take several days across several trades. Re-enamelling is one technician, typically one day, with the bath back in use the next day. Resurfacing from £350, with every job priced individually. Our prices are the same across the UK, so there is no premium for Upton-by-Chester. The job itself decides the price: the material, the amount of damage and how many items.
Why Upton-by-Chester customers choose us
- We leave the room as we found it
- Straight answers about what a repair can do
- Everything repaired in place
- One price list for the entire UK
See our pricing or bath cost comparison.
How the visit works
The work is clean and fairly quiet, so you can carry on at home. Protection goes down first, then the work takes most of the day. Before we leave, we explain the curing time and the aftercare.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- Once cured, normally by the day after, the bath is ready.
How to prepare
- Mention any earlier repairs or resurfacing
- Have somewhere for us to park nearby if possible
- Clear the area around the damage
Getting a price
A quote takes minutes to ask for: photograph the damage, then the entire bath, include your postcode and send them over. You’ll get a fixed quote, not an estimate.
Advice
FAQs for Upton-by-Chester
How durable is a resurfaced bath?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
Does someone need to be in?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Do you resurface freestanding baths?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
Do the materials smell?
It depends on the job, but frequently a little. Ventilation keeps it to a minimum.
Does the bath have to be removed?
No, it stays where it is. Everything is done in your bathroom, with the room masked and ventilated.
Do you work for landlords and businesses?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
Is it OK to have pets in the house?
We ask you to keep children and pets out of the room while we work. Everywhere else in the home is fine.
Will there be fumes?
Yes, while we are applying the finish. We set up ventilation and the smell fades as it cures.
Should I try a DIY kit first?
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is generally the cheaper route.
About our accreditations · Every repair comes with a one-year guarantee.
