Cheshire West and Chester · England
Bath re-enamelling & resurfacing in Whitby, Cheshire West and Chester
Our repair technicians come to Whitby for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- Enamel that’s lost its shine and feels rough
- Chips and rust in more than one place
Should I try a DIY kit first?
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
How we handle bath re-enamelling in Whitby
Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. Whether it’s an outdated colour you’d like to change and chips and rust in more than one place, we can typically put it right, whatever the material.
Every job is backed for twelve months in Whitby and everywhere else. If something goes wrong with the work, we come back.
- Area
- Whitby (CH65, CH34, CH66)
- County
- Cheshire West and Chester
- Warranty
- One year on every repair
- Quote
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Signs you need bath re-enamelling in Whitby
Older baths often have several problems at once: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.
Most people get in touch after spotting something like this:
- A coating lifting around the plughole
- Wear marks under the taps
- Brown or grey marks that don’t clean off
- A bath in a colour that no longer suits
Comparing quotes
- Whether there are any call-out or travel charges
- How long it needs to cure
- What happens if they find more damage
- What aftercare is recommended
Keeping it looking good
Good habits make a big difference to how long a repair lasts:
- Respect the curing time we give you
- Keep suction mats out of the bath
- Wipe the bath dry after use in hard water areas
- Use washing-up liquid and a soft cloth
Dry the bath after use if possible, and rinse off any bath products.
If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
Whitby: your questions answered
How soon can you come?
We will give you dates with your quote. Tell us if you need it done quickly.
What information do you need?
Use the quote form or ring 0345 017 0787, and we will take it from there.
Can you price it without visiting?
Generally, yes. A close-up and a wider photo are enough to give a fixed price.
Are there extra charges for Whitby?
There is no separate call-out charge. The fixed quote covers the visit and the work.
How much does bath re-enamelling cost in Whitby?
Resurfacing from £350. Every job gets a fixed price based on pictures of the damage. Send a close-up of the damage and a wider photo with your CH65 postcode.
Can you change the colour of my bath?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
Is it worth repairing rather than replacing?
Generally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.
Do I have to be there?
We need someone to let us in. After that, you can carry on with your day.
About Whitby
Whitby is about 1 mile east of Ellesmere Port, in Cheshire West and Chester. Clients in Whitby get the same service as everywhere else we cover: a fixed price from your photos, then a visit to do the work. We work in 224 places in Cheshire West and Chester, from the larger towns to small villages. Our jobs stretch from Whitby to Liverpool (9 miles away).
Our visits in CH65, CH34 and CH66 work the same way as everywhere else we cover. That includes homes on Vale Road, Park Road and West Road. Whitby is on the A5032, so it’s easy for us to reach. Other places close to Whitby include Ellesmere Port (1 mile west), Great Sutton (1 mile north-west), Hope Farm (1 mile south-west), Overpool (1 mile north-west) and Strawberry Park (1 mile south-west). Further out, we also cover Chester (6 miles south), Neston (7 miles west), Boughton (6 miles south), Frodsham (8 miles east), Hoole (6 miles south) and Hartford (15 miles east). Being one of Cheshire West and Chester’s larger places, Whitby is somewhere we visit often.
Local landmarks in Whitby
In Whitby, that means homes near Station Hotel, Whitby Park and St. Thomas and the streets around them. Nearby too are Ellesmere Port Church of England College (under half a mile north-west) and William Stockton Community Primary School (within half a mile north). For rail, the closest station is Ellesmere Port station, about 0.6 miles north-east. Nearby you will also find Ellesmere Port Hospital (0.6 miles south-west) and Cheshire Oaks Designer Outlet (1.1 miles south-east). The countryside around Whitby includes Gowy Meadows Nature Reserve.
- Local facilities include Municipal Borough of Ellesmere Port (0.5 miles north-east)
Nearby places to Whitby
Also in Whitby
How the visit works
Once we’re through the door, we keep the work contained to the one room. We mask off everything nearby, the work takes a full day, and we finish by cleaning up and talking you through the result.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Have somewhere for us to park nearby if possible
- Keep pets and children out of the room while we work
- Mention any parking restrictions or tricky access
How to get a price
We price from photos so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
Related advice
Repair or replace in Whitby?
A replacement frequently means several trades over several days. Re-enamelling is one technician, typically one day, with the bath back in use the following day. Our bath re-enamelling starts from £350. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
What you get with us
- Straight answers about what a repair can do
- Fixed prices from your pictures
- Nothing taken out or refitted
- Technicians who travel to you, UK-wide
Take a look at our full price list and bath cost comparison.
Different materials, different repairs
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
How we price bath re-enamelling
Resurfacing from £350. You will know the full cost before you book. We take into account:
- The colour and finish to match
- How easy the damage is to reach
- What the surface is made of
- Any earlier repairs that need removing first
There are no surprise extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
How to get a fixed quote
It only takes a minute to photograph the damage, and it saves a visit. Please include:
- A coin beside the damage so we can judge size
- One sharp close-up of the damage
- The material, if you know it
- Whether it’s been repaired or coated before
If you’re in Whitby and want a price, photos are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
When a repair isn’t the answer
A few problems are outside what a surface repair can do:
- Leaks from fittings rather than the bath
- A bath that’s rusted through
- A bath split right through the body
Send us pictures and we’ll tell you honestly.
Materials we repair
- Acrylic baths
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
About our accreditations · Every repair comes with a one-year guarantee.
