Isle of Wight · England
Bath re-enamelling & resurfacing in Upton, Isle of Wight
Bath re-enamelling in and around Upton: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- Enamel that’s lost its shine and feels rough
- Chips and rust in more than one place
Bath re-enamelling in Upton, done in place
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. We work on cast iron baths, pressed steel baths and Victorian roll-tops, and common reasons people contact us are wear marks under the taps and an original cast iron bath that needs restoring.
Whatever the size of the job, it’s backed by a one-year guarantee in Upton and across Isle of Wight.
- Location
- Upton (PO33)
- County
- Isle of Wight
- Guarantee
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Should you replace it?
Replacing a cast iron bath is a big job: they’re heavy, frequently need breaking up, and a new one is not cheap. Resurfacing in place avoids that entirely. Prices start from £350. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
Why choose Surface Doctor in Upton
- Colour-matched on site
- CHAS, Constructionline and SafeContractor accredited
- Everything repaired in place
- One price list for the entire UK
Read our pricing and guide to resurfacing and replacement costs.
What your bath is made of matters
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. The bath needs to be firm and well supported for the finish to last.
How it works
When we visit, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. Expect it to take the best part of a day. We tidy up before we leave and let you know when you can use it again.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- Once cured, normally by the day after, the bath is ready.
How to prepare
- Let us know which floor the room is on
- Have somewhere for us to park nearby if possible
- Let us know about parking or access
Get a quote
You don’t need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.
Related advice
When to call us in Upton
In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.
Send us a photo if you notice any of these:
- Brown or grey marks that do not clean off
- A bath in a colour that no longer suits
- Lots of chips and rust spots
- A period or roll-top bath worth keeping
What to look for in a quote
- Whether the colour is mixed to match
- What aftercare is recommended
- The length of the guarantee and what it covers
- How the room is protected while they work
How we price bath re-enamelling
Resurfacing from £350. There are no hourly rates or hidden extras. The price depends on:
- Where the damage is and how we get to it
- The colour and finish to match
- The material and finish
- The size and number of damaged areas
A repair generally costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
Quotes from your pictures
Good pictures mean an accurate price. Here’s what helps:
- Any earlier repairs or coatings
- Good light, ideally daylight, without flash glare
- Where you are, by postcode
- The material, if you know it
Upload pictures of the damage and a wider shot of the entire item, and tell us you’re in Upton, and we’ll come back with a fixed quote.
Other services in Upton
Upton questions
Do you resurface freestanding baths?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
How do I book?
Photos of the damage, a photo of the whole bath and your postcode. Then we will agree a date.
Can tenants book a repair?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
Do you cover the whole of Isle of Wight?
The whole UK, including all of Isle of Wight. Just include your postcode and we’ll confirm dates.
Do you work in Upton?
Yes, we do. We send a technician to Upton for every job, and the price is the same as everywhere else.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Is my repair covered?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
Work for landlords and builders
If you manage property in Upton, we’ll quote for several properties at once. Just send pictures for each address and we will price them together.
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
Covering Upton
Upton is about 1 mile south-west of Ryde, in Isle of Wight. Jobs in Upton are booked in like any other job: a fixed quote from pictures, and a technician at your door on the day. Upton is one of 125 places in Isle of Wight we cover. We work right across the region, from Upton to London (about 72 miles away).
Every address in PO33 is within our area. From Stroud Wood Road, Upton Road and Carters Road or a nearby road, a technician can come to you. Close by, we cover Haylands (1 mile north-east), Binstead (1 mile north), Ryde (1 mile north-east), Oakfield (1 mile north-east) and Elmfield (2 miles north-east). Further out, we also cover Newport (5 miles west), Cowes (6 miles north-west), Sandown (4 miles south), Shanklin (6 miles south), Ventnor (8 miles south) and East Cowes (5 miles north-west). If you’re somewhere remote, ring us first and we’ll plan the trip.
What’s near Upton
Our customers here include homes close to Ryde School with Upper Chine, Haylands Primary School and Church of St. Michael and All Angels. For rail, the closest station is Smallbrook Junction station, roughly 1.1 miles east. Well-known places in the area include Arthur Webster Memorial Hospital for Children (5.2 miles south) and Sandown Castle (4 miles south). Green spaces nearby include Briddlesford Nature Reserve and Brading Down.
Should I try a DIY kit first?
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.
Keeping it looking good
Aftercare is simple, and it makes a real difference:
- A quick wipe after use keeps limescale away
- Don’t use the bath until it has fully cured
- Avoid suction-cup mats
- Store bottles off the bath
The first few days matter most: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
About our accreditations · Every repair comes with a one-year guarantee.
