Wiltshire · England
Bath Re-enamelling for Urchfont homes
Full bath re-enamelling and resurfacing for homes and businesses in Urchfont and across Wiltshire. Send pictures for a free, fixed quote.
- Resurfacing from £350
- Wear marks under the taps
- An outdated colour you’d like to change
Bath re-enamelling in Urchfont, done in place
A re-enamelled bath looks and feels like a new one, without any of the disruption of replacing it. It suits anyone happy with the bathroom apart from the bath. We regularly repair acrylic baths, cast iron baths and basins & shower trays, and the jobs we see most are worn patches where water runs and sits and a bath that stays dull however much you clean it.
A one-year guarantee comes as standard, so you’re covered after the visit.
- Area
- Urchfont (SN10)
- Area hub
- Wiltshire
- Cover
- One year on every repair
- Price
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
When a repair isn’t the answer
Some problems need a builder, plumber or fitter rather than us:
- A metal bath with a through crack
- Problems we can’t see until an old finish comes off
- Acrylic that moves when you stand in it
Not sure? Send photos and we’ll give you a straight answer.
Materials we work on in Urchfont
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
Prices and what affects them
Prices start from £350. We give every job a fixed quote from pictures. This is what makes a difference:
- The colour and finish to match
- Doing more than one item at once
- What the surface is made of
- Previous DIY repairs that have to come out
Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Quotes from your pictures
You can take the pictures on your phone. Just ensure we can see:
- Daylight if possible, and no flash reflection
- The material, if you know it
- One picture of the entire bath
- Whether it’s been repaired or coated before
There is no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Urchfont: your questions answered
Will the price change on the day?
The price is fixed for what the pictures show. Anything extra is discussed before we begin.
Can you re-enamel a roll-top bath?
Yes. We can do the inside and outside.
Someone resurfaced my bath and it’s peeling. Can you help?
In most cases. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
Will the bath be moved?
No. We resurface it in place, so the tiles and taps stay put.
What happens next?
We review the photos and send a fixed quote and the next dates we have.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
How long does re-enamelling last?
Look after it and it lasts. Avoid abrasive cleaners and suction mats.
Will there be a smell?
There can be some smell while we work, so we ventilate the room. It fades as everything cures.
Urchfont and nearby
Urchfont is about 3 miles south-east of Devizes, in Wiltshire. Our repair technicians come to customers in Urchfont, so you do not need to take anything anywhere. We cover all 425 towns and villages across Wiltshire. Our jobs stretch from Urchfont to Birmingham (about 80 miles away).
Every address in SN10 is covered. From High Street, The Orchard and Manor Farmyard or a nearby road, a technician can come to you. We also cover the places around Urchfont: Wedhampton (1 mile east), Eastcott (1 mile south-west), Easterton Sands (2 miles south-west), Nursteed (2 miles north-west) and Coate (3 miles north). Within a short drive, we also cover Trowbridge (11 miles west), Chippenham (13 miles north-west), Calne (9 miles north), Devizes (3 miles north-west), Westbury (11 miles west) and Melksham (9 miles north-west).
Near you in Urchfont
Locally, our jobs take us to homes close to Urchfont Church of England Primary School and Church of St Michael and All Angels. A little further out are Market Lavington Museum (2.4 miles south-west) and Roundway Hospital (3.2 miles north-west). Open spaces near Urchfont include Lavington Down.
What happens on the day
You don’t need to empty the room. We bring everything we need with us, put protection down and start once you are happy with the plan. Most jobs take a full day, and you can get on with other things while we are there.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Mention any parking restrictions or tricky access
- Let us know if it has been repaired before
- Let us know which floor the room is on
Getting a price
Upload photos of the damage and one of the entire item, and tell us you are in Urchfont, and we’ll come back with a fixed quote.
Read more
Aftercare tips
Much of the damage we repair could have been avoided. These habits help:
- Keep toiletries on a shelf rather than in the bath
- Get any chip repaired quickly
- Never use suction bath mats
- Wash away dyes and oils after use
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Fix dripping taps quickly.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
DIY repairs versus a professional job
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
Repairs by material
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s what we repair.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Work for landlords and builders
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We’re CHAS, Constructionline and SafeContractor accredited.
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
Towns and villages near Urchfont
More services for Urchfont
Repair or replace: which is better?
There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. In most other cases, resurfacing is the better choice. Prices start from £350. The price depends on the type and amount of damage, what it’s made of and how many items we do on one visit. We give a fixed quote from your pictures, so there are no surprises on the day.
Why us?
- Everything repaired in place
- Same prices wherever you are
- Fixed prices from your photos
- Straight answers about what a repair can do
See our pricing or guide to resurfacing and replacement costs.
About our accreditations · Every repair comes with a one-year guarantee.
