Hampshire · England
Bath Re-enamelling in Walhampton
Local bath re-enamelling for Walhampton: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- A dull, rough surface that will not come clean
- Lots of chips and rust spots
Where we work around Walhampton
Walhampton is about 1 mile east of Lymington, in Hampshire. From the centre of Walhampton to the outlying streets, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. Our technicians cover 683 places in Hampshire.
Postcode districts we cover here: SO41. You will find streets such as Undershore Road and Walhampton Hill. Nearby, we also work in Lymington (1 mile west), Portmore (1 mile north), Warborne (1 mile north), Pennington (1 mile south-west) and Pilley (2 miles north). Further out, we also cover Totton (11 miles north), Hedge End (15 miles north-east), Hythe (9 miles north-east), New Milton (6 miles west), Ringwood (12 miles north-west) and Locks Heath (14 miles north-east).
Local landmarks in Walhampton
Our clients here include homes close to Southlands School, Lymington Church of England Infant School and United Reform Church, among other places. Also close by are Priestlands School (1.1 miles south-west) and The Ferryman pub (less than half a mile north). There is a railway station in Walhampton itself: Lymington Town station. Other landmarks nearby include Lymington New Forest Hospital (0.8 miles north-west) and Yarmouth Castle (4 miles south). Green spaces nearby include Boldre Foreshore.
How we handle bath re-enamelling in Walhampton
Re-enamelling works especially well on cast iron and steel, and we can resurface acrylic baths as well. You end up with a smooth, glossy surface. We work on Victorian roll-tops, acrylic baths and cast iron baths, and people most often call us about an outdated colour you’d like to change and wear marks under the taps.
You’re covered after we leave: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote.
- Where
- Walhampton (SO41)
- County
- Hampshire
- Guarantee
- One year on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Can I fix it myself?
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Landlords, agents and businesses in Walhampton
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
Should you replace it?
If you like your bathroom but not your bath’s surface, re-enamelling is the least disruptive fix. Nothing else is disturbed. Resurfacing from £350, with every job priced individually. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.
Why us?
- No need to remove anything
- One price list for the whole UK
- A year’s guarantee on all work
- Rooms protected and left tidy
See our pricing or guide to resurfacing and replacement costs.
Other services in Walhampton
What a repair cannot fix
Not everything can be repaired, and we’d rather say so up front. Repairs will not solve:
- A bath that is rusted through
- Problems we can’t see until an old finish comes off
- Plumbing leaks, which need a plumber
If in doubt, send photos and we’ll say what we think before you book.
Surfaces we repair
- Cast iron baths
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
Do you need bath re-enamelling in Walhampton?
Enamel does not fail overnight. Abrasive cleaners, limescale and years of use wear the gloss away, generally first under the taps and around the waste.
Common reasons people in Walhampton contact us are:
- Stains that won’t shift
- A coating lifting around the plughole
- A coloured bath you want in white
- Lots of chips and rust spots
Questions to ask before you book
- How the colour is matched
- What preparation is included
- How soon you can use it again
- How long the guarantee is and what it covers
Looking after it afterwards
Once the work has cured, treat it gently:
- Clean with a soft cloth and mild detergent
- Never use suction bath mats
- Dry the bath after use to stop limescale
- Don’t let dyes or oils sit on the finish
Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Fix dripping taps quickly.
Rust spots on a worn bath get worse with time. Resurfacing before they spread keeps it simpler.
Repairs by material
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. The bath needs to be firm and well supported.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
The process
On the day itself, there is little for you to do. Let us in and show us the room, and we will get on with it. The job generally runs to a full day, tidy-up included.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s normally ready the day after.
Getting ready for the visit
- Tell us if there are stairs or a lift
- Ensure the room can be ventilated
- Avoid using the area for a few hours before we arrive
Ask for a price
There is no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed price.
Advice
Your questions about bath re-enamelling in Walhampton
Is there a call-out fee?
We don’t add a call-out fee. The fixed price covers the visit and the work.
Do you need to take the bath out?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as householders across Hampshire.
Is it safe with children and pets around?
Yes, as long as they stay out of the room we are working in. We’ll let you know when it’s safe to use again.
How much does bath re-enamelling cost in Walhampton?
Resurfacing from £350. The exact price depends on the damage, so we quote from photos. You’ll get a fixed figure before booking.
What areas do you cover?
We work UK-wide, and that includes Walhampton. Prices don’t change with location.
Does someone need to be in?
Yes. We need access to the room while we work, at a time that suits you.
How long is the bath unusable?
Typically a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
About our accreditations · Every repair comes with a one-year guarantee.
