Leeds · England

Bath Re-enamelling for Walshford homes

Full bath re-enamelling and resurfacing at your home in Walshford, with a one-year guarantee on every repair.

  • Resurfacing from £350
  • A peeling or bubbling previous coating
  • A roll-top that is seen better days
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath re-enamelling in Walshford

Can I fix it myself?

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.

Bath re-enamelling in Walshford without replacing anything

Most baths are re-enamelled in a day. Nothing is disconnected or removed. Common call-outs are for worn patches where water runs and sits and a coloured bath you want in white, on basins & shower trays, acrylic baths and Victorian roll-tops.

The work is covered for a year after we finish. If anything is not right, ring us and we’ll sort it.

Where
Walshford (LS22)
Region
Leeds
Cover
A year, on every repair
Quote
From £350. Fixed and free, based on photos
Phone
0345 017 0787
Page updated
23 October 2026
Stained basin resurfaced to clean white (before and after)

What happens on the day

We turn up when we said we would and checks the damage against your photos first. The floor and nearby surfaces are covered before we open a single tin. Most visits take the best part of a day, and the room is left clean and tidy.

  1. The room is masked, protected and ventilated.
  2. The bath is cleaned, degreased and any chips or rust repaired.
  3. The surface is prepared and a bonding primer applied.
  4. We spray several coats of new enamel finish.
  5. Once cured, normally by the next day, the bath is ready.

Before we arrive

  • Mention any parking restrictions or tricky access
  • Clear toiletries, mats and anything else from around the area
  • Let the surface dry out before the visit

Get a quote

Getting a price is easy: take a close-up of the damage and a picture from further back, send them over with your postcode, and we will reply with a fixed price. There is no charge for the quote and no obligation.

Get a fixed quote

Read more

Common problems we fix in Walshford

Hard water speeds up the wear, and abrasive cleaners do the most damage.

Clients usually contact us about:

  • Brown or grey marks that do not clean off
  • An outdated colour you’d like to change
  • Wear marks under the taps
  • Lots of chips and rust spots

What your quote should include

  • Whether they match the colour on site
  • What aftercare is recommended
  • How your room will be protected
  • What the guarantee covers, and for how long

How to compare quotes

Repair or replace in Walshford?

Replacing a bath can take several days across several trades. Resurfacing takes one technician and usually a day, with the bath back in use the following day. Resurfacing from £350, with every job priced individually. No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.

Why Walshford clients choose us

  • One-year guarantee on every repair
  • Rooms protected and left tidy
  • Colours mixed by hand to suit your surface
  • Everything repaired in place

See our pricing or guide to resurfacing and replacement costs.

Looking after it afterwards

To keep it looking its best for years:

  • Have chips seen to early
  • Clean with a soft cloth and mild detergent
  • Store bottles off the bath
  • Do not let dyes or oils sit on the finish

Rinse the bath and wipe it over after use, especially in hard water areas, to stop limescale building up.

Worn enamel only gets rougher with time, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.

Work for landlords and builders

We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which is easier on the people living there.

We regularly work with letting and managing agents. Just send photos, the address and how to get access.

Materials and what they mean for the repair

Cast iron

A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s what we repair.

Roll-top and period baths

Freestanding roll-tops can be done inside and out, with the outside refinished as well.

What bath re-enamelling costs

Prices start from £350. We charge the same across the UK, including Walshford. What changes the price is:

  • Whether old repairs or coatings need taking off
  • How many areas need work
  • What kind of damage it is
  • Doing more than one item at once

A repair is priced on what needs doing, not your postcode. The full price is agreed before you book, with nothing added on the day.

How to get a fixed price

The better the photos, the more accurate the price. Here’s what we find most useful:

  • A coin or ruler next to the damage for scale
  • Details of any past repairs
  • One picture of the entire bath
  • A close-up of the damage, in focus

For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.

Walshford and nearby

Walshford is about 3 miles north of Wetherby, in Leeds. Jobs in Walshford are booked in like any other job: a fixed price from your photos, and a technician at your door on the day. We cover all 198 towns and villages in Leeds. We work right across the region, from Walshford to Leeds (14 miles away).

Our visits in LS22 work the same way as everywhere else we cover. Other places close to Walshford include Hunsingore (1 mile east), Cowthorpe (1 mile south-east), Cattal (2 miles east), Ingmanthorpe (2 miles south) and Kirk Deighton (2 miles south-west). We also work in nearby towns such as Leeds (14 miles south-west), Horsforth (15 miles south-west), Wetherby (3 miles south), Woodhouse (14 miles south-west), Yeadon (15 miles south-west) and Otley (14 miles west).

Landmarks near Walshford

Locally, our jobs take us to homes close to Church of St John the Baptist. The nearest railway station is Cattal station, roughly 2.3 miles north-east. Well-known places in the area include Wetherby Castle (3.5 miles south).

Map of Walshford © OpenStreetMap contributors

Walshford: your questions answered

Do you hold any accreditations?

We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

Is it messy?

We protect the room with dust sheets and masking first, and tidy up before we leave.

Do the materials smell?

Some materials have a smell while they’re applied. It fades as everything cures.

Can you fix a peeling bath coating?

In most cases. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.

What if the damage is worse than the pictures show?

If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.

Is a repair better than a new one?

Typically, when the rest is in good condition. A repair avoids removal and making good. We will tell you honestly if replacement makes more sense.

I rent my home. Can I book you?

We can work for tenants, landlords or agents. Just make sure the landlord agrees.

Which areas do you work in?

All of Leeds, and the rest of the UK. There is no extra charge for travel.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.