West Sussex · England
Bath re-enamelling & resurfacing in Warminghurst, West Sussex
Our repair technicians come to Warminghurst for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.
- Resurfacing from £350
- Enamel that’s lost its shine and feels rough
- Thin, worn enamel in places
Bath re-enamelling at your home in Warminghurst
Many of the baths we re-enamel are period roll-tops, which are heavy, hard to move and costly to replace. Resurfacing them in place keeps the original bath. If you are dealing with a bath that stays dull however much you clean it and lots of chips and rust spots, we can help, whatever the material.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Area
- Warminghurst (RH20)
- Region
- West Sussex
- Cover
- A year, on every repair
- Price
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Your questions about bath re-enamelling in Warminghurst
How long will the bath be out of use?
Typically one day, with the bath ready the day after. A badly pitted bath can need a second day.
What areas do you cover?
We work UK-wide, and that includes Warminghurst. Our prices are the same everywhere.
What if the damage is worse than the pictures show?
If we find something the pictures didn’t show, we explain it first. The price only changes if you agree.
When can you do it?
It depends on the time of year and where you are. We’ll offer you dates when we send your quote.
Do you work in Warminghurst?
Yes, we do. We send a technician to Warminghurst for every job, with no extra charge for travel.
How do I get a price for bath re-enamelling in Warminghurst?
Resurfacing from £350. Every job gets a fixed price from your pictures. Send a close-up and a picture of the whole item and your postcode.
Can you make a coloured bath white?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
Do I have to be there?
Someone needs to let us in and show us the job. You do not need to watch us work.
What affects the price in Warminghurst
Prices start from £350. Each job gets its own fixed quote. These are the things that affect it:
- How many areas need work
- Previous DIY repairs that have to come out
- Whether it’s a chip, crack, burn or wear
- Access to the area
We do not add extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
Getting a price from photos
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- Your postcode, so we can check dates
- Any details about the material
- Any earlier repairs or coatings
- A photo taken from further back
Getting a price is easy: take a close-up of the damage and a photo from further back, send them to us with your postcode, and you’ll get a fixed price back. There’s no charge for the quote and no obligation.
Looking after it afterwards
A little care keeps the finish looking good. Our advice:
- Do not use the bath until it has fully cured
- Dry the bath after use to stop limescale
- Repair dripping taps early
- Wash away dyes and oils after use
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
Do you need bath re-enamelling in Warminghurst?
Many baths we resurface have simply been well used, with nothing wrong except the surface. The body of the bath is usually perfectly sound.
These are the problems we’re asked about most:
- A bath that stays dull however much you clean it
- Wear marks under the taps
- An outdated colour you’d like to change
- Chips and rust in more than one place
What to look for in a quote
- How your room will be protected
- Whether a trained technician does the job
- How long it needs to cure
- What prep work is covered
About Warminghurst
Warminghurst is about 8 miles north of Worthing, in West Sussex. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Warminghurst is one of 371 places in West Sussex we cover. You can also see our page for London, about 41 miles away.
We cover every part of the RH20 postcode area. Nearby, we also work in Thakeham (1 mile north-west), Abingworth (1 mile west), Goose Green (1 mile north), Heath Common (1 mile south-west) and West Chiltington (2 miles north-west). Within a short drive, we also cover Crawley (15 miles north-east), Horsham (10 miles north-east), Worthing (8 miles south), Haywards Heath (14 miles east), Burgess Hill (12 miles east) and Littlehampton (10 miles south-west).
Local landmarks in Warminghurst
Locally, our jobs take us to homes close to Rydon Community College, Ashington CofE Primary School and Church of the Holy Sepulchre. Warminghurst’s nearest station is Pulborough station, roughly 4.7 miles west. Nearby you will also find The Storrington And District Museum (2.2 miles south-west). Green spaces nearby include Chanctonbury Hill and Knepp Wildland.
For landlords and businesses
Landlords, letting agents and housing providers in Warminghurst use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Letting agents often send us photos straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Towns and villages near Warminghurst
More services for Warminghurst
Honest limits
A repair isn’t right for every job, for example:
- Leaking taps or wastes (a plumber’s job)
- A cast iron or steel bath that is cracked right through
- A bath that is rusted through
If in doubt, send pictures and we’ll say what we think.
Surfaces we repair
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
What happens on the day
Here’s how a visit usually runs: we arrive on time, sheet and mask the area around the job, do the job and tidy away. Allow the best part of a day. Before we go, we’ll explain how long to leave it and how to look after it.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Move bottles, mats and clutter away from the area
- Let the surface dry out before the visit
- Keep children and pets away from the room on the day
Get a quote
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed price the same day in most cases.
Related advice
Materials and what they mean for the repair
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s what we repair.
Can I fix it myself?
A DIY attempt is not a disaster. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
About our accreditations · Every repair comes with a one-year guarantee.
