Kent · England
Bath re-enamelling & resurfacing in Warmlake, Kent
Full bath re-enamelling and resurfacing in Warmlake, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- A coloured bath you want in white
- An original cast iron bath that needs restoring
How we handle bath re-enamelling in Warmlake
Re-enamelling is a one-day job for most baths, with the bath ready to use the following day. Taps, tiles, panels and plumbing all stay in place. Our repair technicians work on pressed steel baths, basins & shower trays and acrylic baths, and common reasons people get in touch are stains that won’t shift and an original cast iron bath that needs restoring.
The work is guaranteed for twelve months. If something isn’t right in that time, we come back and put it right.
- Area
- Warmlake (ME17)
- Region
- Kent
- Warranty
- One year on every repair
- Quote
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
When we’d advise against a repair
Honesty matters more than a booking, so here’s what a repair cannot fix:
- A metal bath with a through crack
- Anything hidden under an old coating, until we remove it
- Acrylic that moves when you stand in it
Send us pictures and we’ll tell you honestly.
Materials we work on in Warmlake
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
What happens on the day
Here’s how a visit normally runs: we arrive on time, sheet and mask the area around the job, carry out the work and tidy away. Allow the best part of a day. Before leaving, we tell you how long to leave it and how to look after it.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Keep pets and children out of the room while we work
- Point us to the nearest place to park
- Open a window if you can
How to get a price
Pricing is simple: snap the damage close up and then the whole item, send them to us with your postcode, and we’ll reply with a fixed quote. There’s no charge for the quote and you’re under no obligation.
Advice
Different materials, different repairs
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported for the finish to last.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s the part we put right.
Places near Warmlake
Also in Warmlake
Landlords, agents and businesses in Warmlake
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
We work for landlords, letting agents and housing providers in Warmlake as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Warmlake and nearby
Warmlake is about 4 miles south-east of Maidstone, in Kent. We agree a date that works for you, and you will know when to expect us, so you’re not left waiting in all day. We work in 922 places in Kent. You can also see our page for London, about 35 miles away.
Our visits in ME17 are booked in the same way as anywhere else. Streets in the area include Warmlake Orchard, Oast Gardens and Maidstone Road. Neighbouring places we cover include Five Wents (1 mile north), Sutton Valence (1 mile south), Langley Heath (1 mile north), Langley (1 mile north) and Chart Sutton (1 mile west). Within a short drive, we also cover Maidstone (4 miles north-west), Ashford (13 miles south-east), Sittingbourne (10 miles north-east), Royal Tunbridge Wells (15 miles south-west), Tonbridge (14 miles west) and Faversham (14 miles north-east).
Around Warmlake
Typical jobs here are in homes near The Plough Inn, Church of St Michael and Sutton Valence Primary School, among other places. Warmlake’s nearest station is Hollingbourne station, roughly 3.3 miles north-east. Nearby you’ll also find KIMS hospital (4.6 miles north) and The Dog Collar Museum (2.3 miles north-east).
Can I fix it myself?
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
Keeping it looking good
A little care keeps the finish looking good. Our advice:
- Wipe the bath dry after use in hard water areas
- Fix dripping taps quickly
- Wash away dyes and oils after use
- Avoid suction-cup mats
Treat the new finish gently at first: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
Do not try to scrub a worn bath back to shine. It just wears the enamel further.
Warmlake questions
Will there be a smell?
Expect a mild smell while we are working, which fades afterwards.
Is it worth repairing rather than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.
How long does re-enamelling take?
One day for most baths, ready the day after. We give you timings with the quote.
I rent my home. Can I book you?
Yes. Check with your landlord; we can send the quote to them too.
Can you quote from photos?
Nearly always. We only ask to see it in person if the pictures can’t show what we need.
Can you fix a peeling bath coating?
Yes. Removing the old finish takes extra time, which we include in the price.
Is there a call-out fee?
Travel is included in the price, and we charge the same wherever you are.
Do I have to be there?
Yes. We need access to the room while we work, at a time that suits you.
What we are called out for in Warmlake
Hard water speeds up the wear, and gritty cleaners are the worst culprits.
Keep an eye out for these signs:
- A roll-top that’s seen better days
- Several chips and rust patches
- Staining under the taps and around the waste
- A bath in a colour that no longer suits
What your quote should include
- When it can be used again
- Aftercare advice
- If travel is included in the price
- How changes to the job are handled
How we price bath re-enamelling
Prices start from £350. A fixed quote means you know the cost before you book. We look at:
- The material
- Whether we combine several jobs
- Whether old repairs or coatings need taking off
- Access to the area
Our prices are the same across the UK, with no extra for Warmlake. The job itself decides the price: how much damage, what it’s made of and how many items.
How to get a fixed quote
We price nearly every job from photos. This is what we need:
- Whether it’s been repaired or coated before
- A coin or ruler next to the damage for scale
- Any details about the material
- Natural light rather than flash
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
About our accreditations · Every repair comes with a one-year guarantee.
