Kent · England
Bath re-enamelling & resurfacing in Warren Street, Kent
Bath re-enamelling in and around Warren Street: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- Chips and rust in more than one place
- Staining under the taps and around the waste
Repairs by material
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is the part we put right.
How we handle bath re-enamelling in Warren Street
Most baths are re-enamelled in a day, with the bath ready to use the following day. Taps, tiles, panels and plumbing all stay in place. We regularly repair acrylic baths, pressed steel baths and basins & shower trays, and people most often call us about thin, worn enamel in places and a dull, rough surface that won’t come clean.
The work is guaranteed for twelve months. If something isn’t right in that time, we come back and put it right.
- Where
- Warren Street (ME17)
- County
- Kent
- Warranty
- A year, on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Nearby places to Warren Street
Other services in Warren Street
Why repair rather than replace?
Replacing the bath means a plumber, lifting out the old bath, making good the walls and tiles and several days without a working bathroom. Re-enamelling renews the entire surface without moving it. Our bath re-enamelling starts from £350. There are no surprise extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Why choose Surface Doctor in Warren Street
- Normally one visit, start to finish
- CHAS, Constructionline and SafeContractor accredited
- Fixed prices from your photos
- A year’s guarantee on all work
Read our prices page or bath cost comparison.
What we are called out for in Warren Street
Enamel does not fail overnight. Abrasive cleaners, limescale and years of use wear the gloss away, starting where water runs and sits.
The most common problems we’re called about are:
- An original cast iron bath that needs restoring
- A dull, rough surface that won’t come clean
- An old resurfacing that is failing
- Stains that will not shift
Comparing quotes
- Whether the price covers travel
- What preparation is included
- A fixed price, and whether VAT is included
- The length of the guarantee and what it covers
What a repair cannot fix
It helps to know what we cannot do:
- A bath split right through the body
- Plumbing leaks, which need a plumber
- A bath that’s rusted through
Send us photos and we’ll tell you honestly before you book.
Surfaces we repair
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
- Basins & shower trays
Common questions in Warren Street
Do I have to be there?
We need someone to let us in. You don’t need to watch us work.
What does bath re-enamelling cost?
Resurfacing from £350. Every job gets a fixed quote from your photos. Send a close-up of the damage and a wider photo with your ME17 postcode.
Do you resurface freestanding baths?
Yes. We can do the inside and outside if you’d like.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.
Can you repair something that is been repaired before?
Normally, yes. We remove the old repair before doing a new one, so let us know about it.
Is repairing better than replacing?
Usually, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we will say so.
How soon can you come?
It depends on the time of year and where you are. We will offer you dates when we send your quote.
Can pets and children be at home?
Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.
What happens on the day
We turn up at the time we agreed with you, introduces themselves and looks over the damage before anything else. Dust sheets and masking tape go down before any work starts. Most visits take the best part of a day, and the room is left clean and tidy.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- The bath is left to cure and can generally be used the next day.
Getting ready for the visit
- Let us know about parking or access
- Keep pets and children out of the room while we work
- Avoid using the area for a few hours before we arrive
Getting a price
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath, we can price the job the same day in most cases.
Related advice
Landlords, agents and businesses in Warren Street
For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
How to look after the repair
It’s all simple stuff, just a few sensible habits:
- Wash away dyes and oils after use
- Respect the curing time we give you
- Wipe the bath dry after use in hard water areas
- Stick to gentle, non-abrasive cleaners
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and do not leave bottles or razors standing on the surface.
On a worn bath, rust spots keep spreading and make the job bigger. It’s simpler to resurface before they spread.
Our work in Warren Street
Warren Street is about 7 miles south of Sittingbourne, in Kent. Book a date that suits you, and we’ll give you an arrival time in advance, so there’s no waiting around. Warren Street is one of 922 places in Kent we cover. Our jobs stretch from Warren Street to London (41 miles away).
We work across ME17. Whether you live on Payden Street, Slade Road and Warren Street or a nearby road, a technician can come to you. We also cover the places around Warren Street: Payden Street (1 mile north-west), Cold Harbour (1 mile south-east), Woodside Green (1 mile west), West Street (2 miles west) and Wichling (2 miles north). Larger places within reach include Maidstone (10 miles west), Ashford (9 miles south-east), Canterbury (14 miles east), Sittingbourne (7 miles north), Whitstable (14 miles north-east) and Faversham (7 miles north-east).
Landmarks near Warren Street
Locally, our jobs take us to homes close to The Harrow pub, Spuckles and Kennelling Woods and The Lenham School, among other places. The nearest railway station is Lenham station, about 2.4 miles west of the centre. Well-known places in the area include Newnham Castle (3.3 miles north-east).
How we price bath re-enamelling
Resurfacing from £350. You will know the full cost before you book. We look at:
- The material and finish
- The type of damage
- How hard the colour is to match
- Where the damage is and how we get to it
Set against the cost of replacement, repairing normally costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
Getting a price from photos
Phone pictures are fine. Ensure they show:
- A close-up of the damage, in focus
- Natural light rather than flash
- Your postcode, so we can check dates
- Any details about the material
A quote takes minutes to ask for: photograph the damage, then the entire bath, add your postcode and send them to us. You’ll get a fixed price, not an estimate.
About our accreditations · Every repair comes with a one-year guarantee.
