Birmingham · England

Bath Re-enamelling for Warstock homes

Damaged bath in Warstock? We repair it in place, mix the colour on the day and guarantee the work for a year.

  • Resurfacing from £350
  • A period or roll-top bath worth keeping
  • Brown or grey marks that don’t clean off
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath re-enamelling in Warstock

Covering Warstock

Warstock is about 3 miles west of Solihull, in Birmingham. From the centre of Warstock to the outlying streets, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. Warstock is one of 140 places in Birmingham where we work.

Our visits in B14, B13 and B90 are booked in the same way as anywhere else. From Ripon Road, Haunch Lane and School Road or anywhere nearby, we can come to you. We also cover the places around Warstock: Billesley (1 mile north-east), Yardley Wood (1 mile east), Druids Heath (1 mile south-west), Brandwood End (1 mile west) and Springfield (1 mile north-east). We also work in nearby towns such as Birmingham (4 miles north), Royal Sutton Coldfield (10 miles north), Erdington (8 miles north), Lee Bank (4 miles north), Cape Hill (6 miles north-west) and Streetly (11 miles north).

Near you in Warstock

We visit homes around Highters Heath Community School, The Horseshoe pub and Christ Church and the streets around them. Nearby too are Shire Country Park (1.4 miles north-east), Kings Heath Boys (0.6 miles north-west) and Swanshurst School (0.9 miles north). For rail, the closest station is Yardley Wood station, roughly 0.8 miles north-east. A little further out are Brandwood (1 mile west) and Moseley Hall Hospital (2.3 miles north-west). Not far away are Edgbaston Pool.

Map of Warstock © OpenStreetMap contributors

Bath re-enamelling in Warstock, done in place

Cast iron and steel baths are ideal for re-enamelling, and acrylic baths can be resurfaced too. You end up with a smooth, glossy surface. If you’re dealing with chips and rust in more than one place and a roll-top that’s seen better days, we can typically put it right.

We guarantee the work for a year. If something is not right in that time, we come back and put it right.

Location
Warstock (B14, B13, B90)
County
Birmingham
Cover
A year, on every repair
Quote
From £350. Free, fixed price from pictures
Phone
0345 017 0787
Last updated
23 October 2026
Before and after: an old basin refinished to bright white

Landlord and trade work in Warstock

Letting agents often send us photos straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.

If you manage property in Warstock, we’ll quote for several properties at once. Just send pictures for each address and we’ll come back with a combined price.

What we do, step by step

When we visit, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take most of the day. We clean up when we’re done and let you know when you can use it again.

  1. First we protect the bathroom and set up ventilation.
  2. The bath is cleaned, degreased and any chips or rust repaired.
  3. The surface is prepared and a bonding primer applied.
  4. Several coats of new finish are sprayed on.
  5. We leave it to cure, and it’s typically ready the next day.

Getting ready for the visit

  • Let us know about parking or access
  • Clear toiletries, mats and anything else from around the area
  • Keep pets and children out of the room while we work

Getting a price

Email us a picture of the damage and one of the entire item, with your B14 postcode, and we will reply with a fixed quote.

Get a free quote

Related advice

What we cannot put right

To be straight with you, there are a few things a repair won’t fix:

  • A bath that’s rusted through
  • Damage hidden under a previous coating, until it’s stripped back
  • Leaks from fittings rather than the bath

Not sure? Send photos and we’ll give you a straight answer.

Surfaces we repair

  • Pressed steel baths
  • Cast iron baths
  • Basins & shower trays
  • Acrylic baths
  • Victorian roll-tops

Prices and what affects them

Prices start from £350. You’ll know the full cost before you book. We take into account:

  • How hard the colour is to match
  • Whether it’s a chip, crack, burn or wear
  • Whether old repairs or coatings need taking off
  • How many items we do on one visit

Set against the cost of replacement, repairing generally costs far less, because there’s no removal, plumbing or making good. The quote lists exactly what you are paying for.

Send photos for a quote

The better the pictures, the more accurate the price. Here’s what helps:

  • Good light, ideally daylight, without flash glare
  • The material, if you know it
  • A close-up of the damage, in focus
  • A coin beside the damage so we can judge size

To get a price, send a couple of pictures through our quote form or ring us. We will say straight away if a repair is the right fix.

Warstock questions

Are you a vetted contractor?

We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

Will it make a mess?

Dust sheets and masking go down before we start, and we clean up when we’ve finished.

Is the work guaranteed?

Every repair comes with our one-year guarantee. We’ll explain what it covers when we quote.

Which areas do you work in?

The whole UK, including all of Birmingham. Just include your postcode and we’ll offer you dates.

Can you change the colour of my bath?

Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.

Is it OK to have pets in the house?

Keep pets and children away from the work area on the day.

Can you redo someone else’s repair?

Yes, regularly. It can add a little time, which we include in the quote.

Can you do more than one item on the same visit?

Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.

How to look after the repair

It’s all simple stuff:

  • Use washing-up liquid and a soft cloth
  • Keep suction mats out of the bath
  • Leave the bath for the full curing time before using it
  • Dry the bath after use to stop limescale

Rinse the bath and wipe it over after use, particularly where water is hard, so limescale cannot build up.

Worn enamel only gets rougher with time, and rust spots spread under the surface. Resurfacing sooner means less repair work first.

Should I try a DIY kit first?

If you are set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.

You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.

Repairs by material

Roll-top and period baths

Freestanding roll-tops can be done inside and out, with the outside refinished as well.

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is what we repair.

Do you need bath re-enamelling in Warstock?

By the time a bath is a few decades old, it may have a mix of issues: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.

It’s worth getting a quote if you see:

  • A roll-top that is seen better days
  • Worn patches where water runs and sits
  • A peeling or bubbling previous coating
  • An outdated colour you’d like to change

Comparing quotes

  • What aftercare is recommended
  • How your room will be protected
  • What happens if they find more damage
  • What prep work is covered

Our hiring checklist

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.