Birmingham · England
Bath Re-enamelling for Kings Heath homes
Bath re-enamelling in and around Kings Heath: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- An old resurfacing that’s failing
- Enamel that is lost its shine and feels rough
What happens on the day
From the moment we arrive, we keep the work contained to the one room. We mask off everything nearby, the job takes most of the day, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- The bath is left to cure and can typically be used the following day.
Getting ready for the visit
- Tell us about any previous repairs or coatings
- Let us know about parking or access
- Let the surface dry out before the visit
How to get a price
For a price in Kings Heath, photos are the quickest way: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
Related advice
About our bath re-enamelling in Kings Heath
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. We regularly repair Victorian roll-tops, pressed steel baths and acrylic baths, and common reasons people get in touch are lots of chips and rust spots and worn patches where water runs and sits.
All our work comes with our one-year guarantee.
- Area
- Kings Heath (B14, B13, B30)
- Area hub
- Birmingham
- Guarantee
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
What we can’t put right
A repair is not always the answer, and we would rather say so up front. Repairs won’t solve:
- Acrylic that moves when you stand in it
- A cast iron or steel bath that is cracked right through
- Holes rusted through the metal
Send us pictures and we will tell you honestly before you book.
Surfaces we repair
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
Prices and what affects them
Prices start from £350. There are no hourly rates or hidden extras. The price is based on:
- How many areas need work
- How hard the colour is to match
- Whether it’s a chip, crack, burn or wear
- Any earlier repairs that need removing first
A repair is priced on what needs doing, not your postcode. You will see the full price before booking, with no extras added later.
Quotes from your photos
When you take your photos, these tips help us give you a firm price:
- One sharp close-up of the damage
- One picture of the whole bath
- What it’s made of, if you know
- Whether it’s been repaired or coated before
You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.
Aftercare tips
How the surface is treated afterwards matters. Here’s what we suggest:
- Don’t leave a chip unrepaired
- Do not leave bottles, razors or sponges standing on the surface
- Never use suction bath mats
- Don’t use the bath until it has fully cured
Treat the new finish gently at first: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
If a previous coating is starting to peel, don’t pick at it. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
Work for landlords and builders
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit.
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Questions from Kings Heath
Can you do more than one item on the same visit?
Of course, and it usually saves money. Just add the extra items to your pictures and you’ll get one combined price.
What do you need from me?
A close-up, a wider photo and your postcode. Then we will agree a date.
Is the work guaranteed?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Do you cover the whole of Birmingham?
Everywhere in the UK, Kings Heath included. Travel is included in the price.
Can you change the colour of my bath?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
How much does bath re-enamelling cost in Kings Heath?
Resurfacing from £350. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.
Can landlords book you?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
How durable is a resurfaced bath?
It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.
Repairing versus replacing in Kings Heath
Replacing a cast iron bath is a big job: they’re heavy, often need breaking up, and a new one is not cheap. Resurfacing in place avoids that entirely. Our bath re-enamelling starts from £350. Set against the cost of replacement, a repair is usually a fraction of the price, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
What you get with us
- We come to you, anywhere in the UK
- CHAS, Constructionline and SafeContractor accredited
- One visit for most repairs
- We’ll tell you if it’s not worth repairing
Read our full price list and bath cost comparison.
Nearby places to Kings Heath
Other services in Kings Heath
Can I fix it myself?
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Where we work around Kings Heath
Kings Heath is about 3 miles south of Birmingham, in Birmingham. We agree a date that works for you, and we’ll give you an arrival time in advance, so there’s no waiting around. We cover all 140 towns and villages in Birmingham.
Here we cover the B14, B13 and B30 postcode area. We regularly work on streets such as York Road, Barn Lane and Grove Road. Kings Heath sits on or near the A435, so getting to you is simple. Other places close to Kings Heath include Wake Green (1 mile north-east), Brandwood End (1 mile south), Moseley (1 mile north), Warstock (1 mile south-east) and Springfield (1 mile east). Larger places within reach include Birmingham (3 miles north), Royal Sutton Coldfield (9 miles north), Erdington (7 miles north), Lee Bank (3 miles north), Cape Hill (5 miles north-west) and Streetly (10 miles north).
Around Kings Heath
Typical jobs here are in homes near All Saints' Church, St Dunstan's Catholic Primary School and Bishop Challoner Catholic College and the streets around them. Nearby too are Sparkhill Library (1.8 miles north-east), Swanshurst School (0.8 miles east), The Hare And Hounds Public House (within half a mile north) and Kings Heath Park (under half a mile west). For rail, the closest station is Kings Heath station, roughly 0.5 miles north. Further afield, we also cover the area around Broadway Plaza (3.1 miles north) and Joseph Chamberlain Memorial Museum (0.8 miles north-west). The countryside around Kings Heath includes Deer's Leap Wood and Edgbaston Pool.
- Parks and local facilities nearby include Brandwood (1.2 miles south)
Signs you need bath re-enamelling in Kings Heath
Enamel doesn’t fail overnight. Abrasive cleaners, limescale and years of use dull the surface, typically first under the taps and around the waste.
Typical reasons for a call-out include:
- Lots of chips and rust spots
- Worn patches where water runs and sits
- Enamel that’s lost its shine and feels rough
- An original cast iron bath that needs restoring
What your quote should include
- How to care for the finish
- How changes to the job are handled
- Who turns up on the day
- How the room is protected while they work
About our accreditations · Every repair comes with a one-year guarantee.
