Lancashire · England
Bath re-enamelling & resurfacing in Waterfoot, Lancashire
Fixed-price bath re-enamelling in Waterfoot and the surrounding area, normally in one visit.
- Resurfacing from £350
- Several chips and rust patches
- A coating lifting around the plughole
Bath re-enamelling in Waterfoot without replacing anything
A re-enamelled bath looks and feels like a new one, but without the cost and upheaval of a refit. It’s ideal if you like your bathroom but not the state of the bath. Our technicians work on pressed steel baths, basins & shower trays and cast iron baths, and common reasons people contact us are an old resurfacing that’s failing and an original cast iron bath that needs restoring.
Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before you book.
- Where
- Waterfoot (BB4, OL13)
- Region
- Lancashire
- Warranty
- One year on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Landlord and trade work in Waterfoot
We are used to working with agents and managing companies. Just send pictures, the address and how to get access and we’ll handle the rest.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
What happens on the day
You do not need to empty the room beforehand. We bring everything we need with us, lay protective sheets and get going once we’ve agreed what we’re doing. Most jobs take most of the day, and you’re welcome to carry on with your day while we work.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure.
Preparing for the visit
- Point us to the nearest place to park
- Let us know which floor the room is on
- Make sure the area is dry
How to get a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them over. You’ll get a fixed quote, not an estimate.
Read more
Looking after it afterwards
A little care keeps the finish looking good. Our advice:
- Wash away dyes and oils after use
- Keep suction mats out of the bath
- Repair dripping taps early
- Respect the curing time we give you
Wipe the bath dry after use where you can, especially in hard water areas, and rinse off any bath products.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
What a repair can’t fix
In fairness, there are a few things a repair won’t fix:
- A bath that’s rusted through
- Leaks from fittings rather than the bath
- A poorly supported acrylic bath, until it’s firmed up
Send us pictures and we will tell you honestly before booking.
What we work on
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
Repair or replace: which is better?
A replacement frequently means several trades over several days. Re-enamelling is one technician, usually one day, with the bath back in use the following day. Our bath re-enamelling starts from £350. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.
What you get with us
- Colour mixed on the day to match
- Usually one visit, start to finish
- Everything repaired in place
- Work done at your home or business
See our full price list and resurfacing vs replacement cost guide.
What we are called out for in Waterfoot
Enamel wears gradually. Years of cleaning, hard water and hot baths wear the gloss away, normally first under the taps and around the waste.
The things customers normally mention when they call are:
- Stains that will not shift
- Lots of chips and rust spots
- A roll-top that’s seen better days
- Enamel that is lost its shine and feels rough
Before you book anyone
- How long the guarantee is and what it covers
- What preparation is included
- How the room is protected while they work
- Aftercare advice
Where we work around Waterfoot
Waterfoot is about 1 mile south-east of Rawtenstall, in Lancashire. Across the BB4 area, a technician comes to you. Waterfoot is one of 482 places in Lancashire we cover. We work right across the region, from Waterfoot to Manchester (15 miles away).
Every address in BB4 and OL13 is within our area, from the main roads to the quietest streets. Local streets include Glen Road, Carr Lane and Dark Lane. We also cover the places around Waterfoot: Newchurch (1 mile north), Cowpe (1 mile south-east), Cloughfold (1 mile north-west), Stacksteads (1 mile east) and Balladen (2 miles west). Larger places within reach include Burnley (7 miles north), Accrington (6 miles north-west), Nelson (10 miles north), Colne (12 miles north), Clitheroe (14 miles north-west) and Haslingden (3 miles west).
Around Waterfoot
Typical jobs here are in homes near Church of St James the Great, Jolly Sailor pub and Bacup and Rawtenstall Grammar School and the streets around them. Other landmarks nearby include Rossendale General Hospital (2.4 miles west) and Bacup Natural History Society And Museum (2.2 miles east). Open spaces near Waterfoot include Hail Storm Hill.
Common questions in Waterfoot
Does someone need to be in?
We need someone to let us in. After that, you can carry on with your day.
What happens once I’ve sent pictures?
You get a fixed quote and available dates. If we need another angle, we will ask.
Is there any odour?
There can be some smell while we work, so we ventilate the room. It clears as the materials cure.
Can landlords book you?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
Is there a smell?
A little, during the work. We set up ventilation and the smell fades as it cures.
How much does bath re-enamelling cost in Waterfoot?
Prices start from £350. Every job gets a fixed price from your pictures. Send a close-up and a photo of the entire item with your BB4 postcode.
I rent my home. Can I book you?
Yes, though it’s best to check with your landlord first. Landlords are frequently glad to have it sorted.
Can a failed resurfacing be redone?
Generally, yes. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
Towns and villages near Waterfoot
What else we do in Waterfoot
DIY kit or professional repair?
If you are set on a kit, follow its instructions closely, and do not use it until it has fully cured. If it fails, we can still put it right.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.
What your bath is made of matters
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.
About our accreditations · Every repair comes with a one-year guarantee.
