Lancashire · England
Bath re-enamelling & resurfacing in Stacksteads, Lancashire
Problem with your bath in Stacksteads? We put it right where it is, match it on site and guarantee the work for a year.
- Resurfacing from £350
- Wear marks under the taps
- A bath that stays dull however much you clean it
About our bath re-enamelling in Stacksteads
Most baths are re-enamelled in a day. Nothing is disconnected or removed. If you are dealing with stains that won’t shift and wear marks under the taps, we can typically put it right, whatever the material.
Every repair is covered by a one-year guarantee, wherever you are in Lancashire.
- Location
- Stacksteads (OL13)
- County
- Lancashire
- Guarantee
- 12 months on all our work
- Quote
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
How we price bath re-enamelling
Resurfacing from £350. There’s no area surcharge for Stacksteads. The price reflects:
- Whether we combine several jobs
- The colour and finish to match
- The size and number of damaged areas
- How easy the damage is to reach
Set against the cost of replacement, repairing usually costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
How to get a fixed quote
A couple of clear pictures is all it takes. It helps if you send:
- A picture taken from further back
- A coin or ruler next to the damage for scale
- One sharp close-up of the damage
- Daylight if possible, and no flash reflection
The quickest way to a price is to send two or three pictures using our quote form or ring us. We’ll say right away if a repair is the right fix.
Stacksteads and nearby
Stacksteads is about 1 mile west of Bacup, in Lancashire. We travel to homes and businesses in Stacksteads, so you don’t need to take anything anywhere. Stacksteads is one of 482 places in Lancashire where we work. We work right across the region, from Stacksteads to Manchester (15 miles away).
Here we cover the OL13 postcode area. You’ll find streets such as Acre Avenue, Cutler Lane and Greens Lane, all of which we cover. Neighbouring places we cover include Cowpe (1 mile south-west), Waterfoot (1 mile west), Newchurch (1 mile west), Cloughfold (2 miles west) and Balladen (3 miles west). Within a short drive, we also cover Burnley (7 miles north), Accrington (7 miles north-west), Nelson (10 miles north), Rawtenstall (3 miles west), Colne (12 miles north) and Clitheroe (14 miles north-west).
What’s near Stacksteads
Locally, our jobs take us to homes close to The Valley Leadership Academy, Swan Hotel and Church of the Holy Trinity and the streets around them. The nearest railway station is Walsden station, roughly 4.7 miles east of the centre. Other landmarks nearby include Rossendale General Hospital (3.7 miles west) and Bacup Natural History Society And Museum (1.1 miles north-east). Open spaces near Stacksteads include Hail Storm Hill.
Common problems we fix in Stacksteads
Hard water speeds up the wear, and gritty cleaners are the worst culprits.
These are the problems we’re asked about most:
- Chips and rust in more than one place
- A roll-top that’s seen better days
- Brown or grey marks that do not clean off
- A bath in a colour that no longer suits
What to look for in a quote
- What protection goes down before work starts
- What happens if the damage is worse than the photos show
- Whether there are any call-out or travel charges
- The length of the guarantee and what it covers
Landlord and trade work in Stacksteads
Landlords, letting agents and housing providers in Stacksteads use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Builders use us to fix snagging damage before handover. We can visit several plots in one trip to keep costs down.
Your questions about bath re-enamelling in Stacksteads
What if the damage is worse than the photos show?
We’ll show you and explain before doing anything extra. Nothing extra is done without your say-so.
Are you a vetted contractor?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Do you resurface freestanding baths?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
How long is the bath unusable?
Usually a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
Can I get a quote without a visit?
Usually, yes. A close-up and a wider photo are enough to give a fixed quote.
Is it OK to have pets in the house?
Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.
How durable is a resurfaced bath?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Do you need to take the bath out?
No. We resurface it in place, so nothing else is disturbed.
Should I try a DIY kit first?
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
What your bath is made of matters
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. It must be solid and not flex underfoot.
Aftercare tips
After the repair has cured, a few habits help it last:
- Repair dripping taps early
- Store bottles off the bath
- Do not let dyes or oils sit on the finish
- Never use suction bath mats
Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.
Leave a peeling coating alone. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
Other services in Stacksteads
What we do, step by step
We begin by going over the job with you, so there are no surprises. Then the area is sheeted and masked and the work begins. It normally takes a full day, and we’ll keep you posted as we go.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Point us to the nearest place to park
- Tell us if there are stairs or a lift
- Move bottles, mats and clutter away from the area
Get a quote
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can give you a fixed price.
Related advice
When we would advise against a repair
Some problems need a builder, plumber or fitter rather than us:
- Steel that has corroded right through
- An acrylic bath that flexes badly underfoot
- Problems we can’t see until an old finish comes off
Send us photos and we’ll tell you honestly.
Materials we repair
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
About our accreditations · Every repair comes with a one-year guarantee.
