Highland · Scotland
Bath Re-enamelling in Watten
Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in Watten. Send pictures for a free, fixed quote.
- Resurfacing from £350
- Worn patches where water runs and sits
- Stains that won’t shift
Bath re-enamelling at your home in Watten
We do not move the bath, so the taps, tiles and plumbing aren’t touched. Most baths are done in one visit, and can be used again the day after. Whether it’s an old resurfacing that’s failing and a bath that stays dull however much you clean it, we can help, whatever the material.
All of our repairs are guaranteed for twelve months. We return to put right any problem with the work.
- Area
- Watten (KW1)
- Region
- Highland
- Warranty
- One year on every repair
- Price
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Common problems we fix in Watten
The gloss on enamel is thin, and abrasive cleaning slowly wears it away. After years of use, the surface becomes porous and stains easily.
If you can see any of these, send us a photo:
- A bath that stays dull however much you clean it
- Wear marks under the taps
- A coloured bath you want in white
- A peeling or bubbling previous coating
What to look for in a quote
- Whether they match the colour on site
- How soon you can use it again
- What the guarantee covers, and for how long
- What protection goes down before work starts
Other services in Watten
Repairs by material
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
About Watten
Watten is about 12 miles south-east of Thurso, in Highland. Customers in Watten get the same service as everywhere else we cover: a fixed quote from photos, and a technician at your door on the day. Our repair technicians cover 253 places across Highland.
Our visits in KW1 are booked in the same way as anywhere else. Local streets include Station Road, Henderson Square and Achingale Place, all of which we cover. We also cover the places around Watten: Gillock (3 miles north-west), Hastigrow (4 miles north), Bower (5 miles north), Reiss (5 miles east) and Haster (6 miles east). Within a short drive, we also cover Thurso (12 miles north-west), Wick (8 miles east) and Castletown (9 miles north). If you’re somewhere remote, call first so we can plan the visit.
What’s near Watten
Typical jobs here are in homes near Mains Of Watten and the streets around them. Green spaces nearby include Loch Watten.
Repair or replace: which is better?
There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing normally wins. Resurfacing from £350, with every job priced individually. Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access, and doing several items at once reduces it.
What you get with us
- Nothing taken out or refitted
- Straight answers about what a repair can do
- Colours mixed by hand to suit your surface
- A year’s guarantee on all work
Read our full price list and bath cost comparison.
For landlords and businesses
Housing associations and facilities teams use us for planned and reactive repairs in Highland and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
We are used to working with agents and managing companies. Just send pictures, the address and how to get access and we will arrange it.
The process
Visits start with a quick look at the job together, so there are no surprises. After that, protection goes down around the work area and the work begins. It normally takes a full day, and we’ll tell you if anything changes.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Keep pets and children out of the room while we work
- Mention if the room is upstairs or in a flat
- Mention any parking restrictions or tricky access
How to get a price
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Read more
Watten questions
Do you come to Watten?
Yes. We work across the UK and travel to Watten. Send photos and we will quote, or call 0345 017 0787.
Do you need to take the bath out?
No, it stays where it is. Everything is done in your bathroom, with the room masked and ventilated.
How durable is a resurfaced bath?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
When can you do it?
That depends on our diary for your area. Send photos with your postcode and we will reply with the earliest dates.
How long is the bath unusable?
Normally a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
Which areas do you work in?
All of Highland, and the rest of the UK. Travel is included in the price.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
How we price bath re-enamelling
Prices start from £350. You won’t pay by the hour. The price is based on:
- Unusual colours or finishes
- Doing more than one item at once
- The material and finish
- Whether it’s a chip, crack, burn or wear
A repair usually costs much less than people expect, particularly next to the cost of replacement. Send photos and we’ll give you the exact figure.
How to get a fixed quote
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- Where you are, by postcode
- A clear, close picture of the problem area
- A wider photo showing the entire bath
- Good light, ideally daylight, without flash glare
Upload a picture of the damage and a wider shot of the entire item, with your KW1 postcode, and we’ll reply with a fixed price.
Can I fix it myself?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
A DIY attempt is not a disaster. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.
How to care for the repair
How the surface is treated afterwards matters. Here’s what we suggest:
- Stick to gentle, non-abrasive cleaners
- Leave the bath for the full curing time before using it
- Dry the bath after use to stop limescale
- Have chips seen to early
Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface and makes resurfacing more work.
About our accreditations · Every repair comes with a one-year guarantee.
