Cheshire West and Chester · England
Bath re-enamelling & resurfacing in Waverton, Cheshire West and Chester
Bath re-enamelling in Waverton without the cost of replacing. Send us pictures for a fixed price, then book a visit.
- Resurfacing from £350
- Brown or grey marks that don’t clean off
- A bath that stays dull however much you clean it
Bath re-enamelling in Waverton without replacing anything
When a bath is structurally fine but worn out on the surface, re-enamelling is usually the most cost-effective option. It avoids removal, plumbing and re-tiling. Common call-outs are for wear marks under the taps and lots of chips and rust spots, on Victorian roll-tops, basins & shower trays and pressed steel baths.
You get a one-year guarantee, the same in Waverton as everywhere else we work.
- Where
- Waverton (CH3)
- County
- Cheshire West and Chester
- Guarantee
- One year on every repair
- Price
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
For landlords and businesses
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.
Housing associations and facilities teams use us for planned and reactive repairs in Cheshire West and Chester and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Where we work around Waverton
Waverton is about 3 miles south-east of Chester, in Cheshire West and Chester. Clients in Waverton get the same service as everywhere else we cover: a fixed quote from your photos, and a technician at your door on the day. Waverton is one of 224 places in Cheshire West and Chester where we work. Our nearest city page is Liverpool, about 17 miles away.
Jobs in CH3 work the same way as everywhere else we cover. You will find streets such as Waverton Mill Quays, Eggbridge Lane and Fox Lane, all of which we cover. Other places close to Waverton include Rowton (1 mile west), Christleton (1 mile north-west), Saighton (1 mile south-west), Littleton (2 miles north-west) and Hatton Heath (2 miles south). Larger places within reach include Chester (3 miles north-west), Ellesmere Port (8 miles north-west), Winsford (12 miles east), Northwich (14 miles north-east), Neston (13 miles north-west) and Boughton (3 miles west).
Local landmarks in Waverton
Locally, our jobs take us to homes close to St Peter's Church, Waverton Community Primary School and Christleton High School and the streets around them. The nearest railway station is Chester station, roughly 3.1 miles north-west of the centre. Further afield, we also cover the area around Chester Castle (3.3 miles west) and Chester Motor Museum (2.6 miles north-west). The countryside around Waverton includes Hockenhull Platts.
- Parks and local facilities nearby include Chester (2.9 miles west)
What happens on the day
You do not need to empty the room. Everything we use comes in the van with us, put protection down and start once you’re happy with the plan. It typically takes a full day, and you are welcome to carry on with your day while we work.
- We mask and protect the room and ventilate it.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- The bath is left to cure and can generally be used the day after.
Before we arrive
- Mention any parking restrictions or tricky access
- Move bottles, mats and clutter away from the area
- Point us to the nearest place to park
Getting a price
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
Read more
Common problems we fix in Waverton
Many baths we resurface have simply been well used, and only the surface is worn. The body of the bath is generally perfectly sound.
You may need us if you’ve spotted:
- An original cast iron bath that needs restoring
- An old resurfacing that is failing
- A bath in a colour that no longer suits
- Chips and rust in more than one place
What your quote should include
- What aftercare is recommended
- Whether the price covers travel
- Is the price fixed, and does it include VAT?
- Who turns up on the day
Prices and what affects them
Resurfacing from £350. Prices are worked out job by job. The main factors are:
- The colour and finish to match
- Previous DIY repairs that have to come out
- Whether we combine several jobs
- The size and number of damaged areas
We charge the same wherever you are, so there’s no premium for Waverton. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Send photos for a quote
A couple of clear pictures is all it takes. Try to include:
- A photo taken from further back
- Whether it’s been repaired or coated before
- Something in shot to show the size
- A close-up of the damage, in focus
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Looking after it afterwards
Simple care helps the repair last. Our advice:
- A dripping tap should be fixed promptly
- Wash away dyes and oils after use
- Leave the bath for the full curing time before using it
- Do not leave bottles, razors or sponges standing on the surface
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and do not leave bottles or razors standing on the surface.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Towns and villages near Waverton
More services for Waverton
Questions from Waverton
Do the materials smell?
There can be some smell while we work. It fades as everything cures.
Can you change the colour of my bath?
Yes, most people go for white. Mention the colour you want when you send photos.
Is it worth repairing rather than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.
Can you fix a peeling bath coating?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
Can you repair something that is been repaired before?
Yes, regularly. It can add a little time, which we include in the quote.
Is there a call-out fee?
Travel is included in the price, and we charge the same wherever you are.
Can landlords book you?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses in Waverton.
Is my repair covered?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
Materials and what they mean for the repair
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is what we repair.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
What we can’t put right
A few problems are outside what a surface repair can do:
- A bath that’s rusted through
- A metal bath with a through crack
- Problems we cannot see until an old finish comes off
If in doubt, send photos and we will say what we think.
Materials we work on in Waverton
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
Repair or replace: which is better?
Replacing a bath can take several days across several trades. Resurfacing takes one technician and usually a day. Resurfacing from £350, with every job priced individually. There are no surprise extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
What you get with us
- CHAS, Constructionline and SafeContractor accredited
- We leave the room as we found it
- Most jobs done in one visit
- Colours mixed by hand to suit your surface
Read our full price list and resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
