Cumbria · England
Bath re-enamelling & resurfacing in Waverton, Cumbria
Our repair technicians come to Waverton for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- Several chips and rust patches
- An outdated colour you’d like to change
Bath re-enamelling in Waverton without replacing anything
After re-enamelling, the bath has a smooth, glossy, new-looking surface, but without the cost and upheaval of a refit. It’s ideal if you like your bathroom but not the state of the bath. If you’re dealing with wear marks under the taps and lots of chips and rust spots, we can usually put it right, whatever the material.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Area
- Waverton (CA7)
- Area hub
- Cumbria
- Cover
- 12 months on all our work
- Price
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
What affects the price in Waverton
Resurfacing from £350. There is no charge for travel to Waverton. The price comes down to:
- Whether we combine several jobs
- What the surface is made of
- What kind of damage it is
- Access to the area
Compared with replacing, repairing usually costs far less, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Quotes from your pictures
We price nearly every job from pictures. This is what we need:
- A coin or ruler next to the damage for scale
- Where you are, by postcode
- One picture of the entire bath
- Good light, ideally daylight, without flash glare
We price from photos so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
Repairing versus replacing in Waverton
Replacing a bath normally involves a plumber, a fitter and a tiler. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Resurfacing from £350, with every job priced individually. Rather than charging by the hour, we price the entire job up front. It depends on the damage, the material and access, and doing several items at once reduces it.
Why us?
- Nothing taken out or refitted
- Same prices wherever you are
- Work done at your home or business
- Colours mixed by hand to suit your surface
Read our prices page and bath cost comparison.
Looking after it afterwards
Good habits make a big difference to how long a repair lasts:
- Rinse off hair dye, oils and bath bombs right away
- Keep toiletries on a shelf rather than in the bath
- Stick to gentle, non-abrasive cleaners
- A quick wipe after use keeps limescale away
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
On a worn bath, rust spots keep spreading. Resurfacing before they spread keeps it simpler.
Nearby places to Waverton
More services for Waverton
FAQs for Waverton
Can you do more than one item on the same visit?
Yes. Doing several items on one visit usually costs less than separate visits. Send pictures of everything you’d like done.
Can I get a quote without a visit?
In nearly every case. If photos don’t show enough, we’ll ask for another angle.
Is a repair better than a new one?
Generally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.
Can you do the outside of a roll-top?
Yes, frequently. We resurface the inside, and the outside can be refinished too.
Will there be a smell?
It depends on the job, but frequently a little. Open windows and an extractor fan help, and it soon fades.
What happens once I’ve sent photos?
We come back with a fixed quote, plus dates. There’s no obligation to book.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Can tenants book a repair?
Yes. Check with your landlord; we can send the quote to them too.
When we would advise against a repair
In fairness, there are a few things a repair won’t fix:
- A poorly supported acrylic bath, until it’s firmed up
- A metal bath with a through crack
- Holes rusted through the metal
If in doubt, send pictures and we will say what we think.
Surfaces we repair
- Cast iron baths
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
How it works
You don’t need to empty the room beforehand. Everything we use comes in the van with us, put protection down and start once you’re happy with the plan. It typically takes most of the day, and you can get on with other things while we are there.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the following day.
Before we arrive
- Have a window or extractor fan available
- Tell us about parking, stairs or access
- Point us to the nearest place to park
Get a quote
To get a price, send two or three photos through our quote form or ring us. We will say right away if a repair is the right fix.
Advice
Where we work around Waverton
Waverton is about 12 miles south-west of Carlisle, in Cumbria. We agree a date that works for you, and you’ll know when to expect us, so you are not left waiting in all day. We cover 438 places in Cumbria, from the larger towns to small villages. Our jobs stretch from Waverton to Newcastle upon Tyne (64 miles away).
We cover every part of the CA7 postcode area and the streets around it. We also cover the places around Waverton: Wigton (2 miles east), Brackenlands (2 miles east), Bolton Low Houses (2 miles south-east), Oulton (3 miles north-east) and Fletchertown (3 miles south). We also work in nearby towns such as Carlisle (12 miles north-east), Maryport (13 miles south-west), Cockermouth (12 miles south-west), Currock (12 miles east), Raffles (11 miles north-east) and Keswick (15 miles south).
Near you in Waverton
Typical jobs here are in homes near Christ Church, The Nelson Thomlinson School and Wigton School. The closest station to Waverton is Wigton station, about 2 miles north-east. Further afield, we also cover the area around St Mungo's Castle (2.9 miles west).
Materials and what they mean for the repair
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is what we repair.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Landlord and trade work in Waverton
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We’re CHAS, Constructionline and SafeContractor accredited.
We are used to working with agents and managing companies. Just send photos, the address and how to get access and we will arrange it.
Can I fix it myself?
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
About our accreditations · Every repair comes with a one-year guarantee.
