Cumbria · England
Bath Re-enamelling in Fletchertown
Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in Fletchertown. Send photos for a free, fixed quote.
- Resurfacing from £350
- Brown or grey marks that do not clean off
- Chips and rust in more than one place
Common problems we fix in Fletchertown
By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.
It’s worth getting a quote if you see:
- A dull, rough surface that will not come clean
- A bath in a colour that no longer suits
- Chips and rust in more than one place
- An old resurfacing that is failing
What your quote should include
- Whether they match the colour on site
- Whether the price is fixed and includes VAT
- What preparation is included
- Whether there are any call-out or travel charges
How we handle bath re-enamelling in Fletchertown
The bath stays where it is, so your taps, tiles and plumbing are left alone. It usually takes one visit, and can be used again the following day. Our repair technicians work on Victorian roll-tops, pressed steel baths and basins & shower trays, and people most often call us about chips and rust in more than one place and wear marks under the taps.
You get a one-year guarantee, the same in Fletchertown as everywhere else we work.
- Area
- Fletchertown (CA7)
- Region
- Cumbria
- Warranty
- One year on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
How we price bath re-enamelling
Resurfacing from £350. We price every job individually, from your pictures. What matters most is:
- How many areas need work
- Previous DIY repairs that have to come out
- What the surface is made of
- Whether we combine several jobs
A repair usually costs much less than people expect, particularly next to the cost of replacement. Send pictures and we’ll give you the exact figure.
Quotes from your pictures
You can take the pictures on your phone, there is no need for anything special. Just make sure we can see:
- One sharp close-up of the damage
- A coin or ruler next to the damage for scale
- Any details about the material
- Details of any past repairs
The quickest way to a price is to send two or three photos using our quote form or call us. We’ll tell you honestly if a repair is the right fix.
Covering Fletchertown
Fletchertown is about 14 miles south-west of Carlisle, in Cumbria. Book a date that suits you, and you’ll know when to expect us, so you are not left waiting in all day. Fletchertown is one of 438 towns and villages in Cumbria where we work. We work right across the region, from Fletchertown to Newcastle upon Tyne (about 65 miles away).
All of CA7 is covered. If you’re just outside Fletchertown, we cover Blennerhasset (2 miles south-west), Bolton Low Houses (2 miles north-east), Waverton (3 miles north), Bothel (3 miles south-west) and Aspatria (4 miles west). Further out, we also cover Carlisle (14 miles north-east), Maryport (11 miles south-west), Cockermouth (9 miles south-west), Currock (14 miles north-east), Raffles (13 miles north-east) and Keswick (13 miles south).
Local landmarks in Fletchertown
In Fletchertown, that means homes near Church of Allhallows and the streets around them. The nearest railway station is Aspatria station, about 4 miles west of the centre. Well-known places in the area include St Mungo's Castle (3.1 miles north-west). Open spaces near Fletchertown include Torpenhow Hill.
Nearby places to Fletchertown
What else we do in Fletchertown
Landlords, agents and businesses in Fletchertown
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We’re CHAS, Constructionline and SafeContractor accredited.
We regularly work with letting and managing agents. Just send pictures, the address and how to get access.
Your questions about bath re-enamelling in Fletchertown
Can you do the outside of a roll-top?
Yes. Inside and out.
Is repairing better than replacing?
Usually, if the item is otherwise sound. A repair avoids removal and making good. We will tell you honestly if replacement makes more sense.
Do you come to Fletchertown?
Yes. We cover the entire UK and travel to Fletchertown. Send pictures and we’ll quote, or call 0345 017 0787.
Someone resurfaced my bath and it’s peeling. Can you help?
In most cases. We strip the failing coating and resurface it properly. Mention it when you send photos.
Do you cover the entire of Cumbria?
Everywhere in the UK, Fletchertown included. There’s no extra charge for travel.
Is the work guaranteed?
Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.
What happens after I send photos?
We look at the pictures and reply with a fixed quote and some dates. If anything’s unclear, we will ask for another photo.
What if the damage is worse than the photos show?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
What a repair can’t fix
Some problems need a builder, plumber or fitter rather than us:
- A poorly supported acrylic bath, until it’s firmed up
- Damage hidden under a previous coating, until it’s stripped back
- Plumbing leaks, which need a plumber
Send us photos and we will tell you honestly.
Materials we repair
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
Repair or replace in Fletchertown?
Replacing a bath normally involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and generally one day, and the bath can be used the day after. Our bath re-enamelling starts from £350. Our prices are the same across the UK, so there’s no premium for Fletchertown. The job itself decides the price: how much damage, what it’s made of and how many items.
Why book with us
- Fixed prices from your pictures
- Colour-matched on site
- Work done at your home or business
- CHAS, Constructionline and SafeContractor accredited
See our full price list and resurfacing vs replacement cost guide.
Looking after it afterwards
Simple care helps the repair last. We recommend:
- Leave the bath for the full curing time before using it
- Get any chip repaired quickly
- Dry the bath after use to stop limescale
- Use washing-up liquid and a soft cloth
Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.
On a worn bath, rust spots keep spreading and make the job bigger. Resurfacing before they spread keeps it simpler.
DIY repairs versus a professional job
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
How the visit works
When we visit, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take the best part of a day. We tidy up before we leave and tell you when it’s ready to use.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Plan for the room to be out of bounds to pets and children
- Avoid using the area for a few hours before we arrive
- Let us know if it has been repaired before
Get a quote
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job without visiting.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
