Lincolnshire · England
Bath re-enamelling & resurfacing in Welby, Lincolnshire
Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in Welby. Send photos for a free, fixed quote.
- Resurfacing from £350
- Chips and rust in more than one place
- Staining under the taps and around the waste
Should I try a DIY kit first?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.
Bath re-enamelling in Welby without replacing anything
Many of the baths we re-enamel are period roll-tops, which are heavy, hard to move and costly to replace. Resurfacing them in place keeps the original bath. We regularly repair acrylic baths, basins & shower trays and pressed steel baths, and common reasons people contact us are chips and rust in more than one place and brown or grey marks that don’t clean off.
Big or small, you get the same one-year guarantee in Welby and across Lincolnshire.
- Area
- Welby (NG32)
- Region
- Lincolnshire
- Guarantee
- One year on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
About Welby
Welby is about 4 miles east of Grantham, in Lincolnshire. Book a date that suits you, and we will give you an arrival time in advance, so there’s no waiting around. We work in 732 places across Lincolnshire, from the larger towns to small villages. You can also see our page for Birmingham, about 65 miles away.
All of NG32 is covered, from the main roads to the quietest streets. If you’re just outside Welby, we cover Londonthorpe (1 mile west), Barkston Heath (2 miles north), Kelby (3 miles north-east), West Willoughby (3 miles north) and Wilsford (3 miles north-east). Further out, we also cover Grantham (4 miles west), Sleaford (7 miles north-east), Bourne (14 miles south-east), Austerby (14 miles south-east), Spittlegate (4 miles south-west) and Gonerby Hill Foot (4 miles west).
Landmarks near Welby
Around Welby, we work in homes near St Bartholomew's Church and Crown & Anchor pub, among other places. The nearest railway station is Ancaster station, about 3.8 miles north of the centre. Nearby you will also find Grantham and Kesteven Hospital (3.9 miles west).
How to look after the repair
To keep it looking its best:
- Avoid suction-cup mats
- Clean with a soft cloth and mild detergent
- Respect the curing time we give you
- Wipe the bath dry after use in hard water areas
The first few days matter most: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
Don’t try to scrub a worn bath back to shine. It removes more of the surface and makes resurfacing more work.
Repairing versus replacing in Welby
If you like your bathroom but not your bath’s surface, re-enamelling is the least disruptive fix. Tiles, panels and taps stay put. Resurfacing from £350, with every job priced individually. Every job is a little different, so we price each one individually. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
Why choose Surface Doctor in Welby
- Nothing taken out or refitted
- One price list for the entire UK
- Work done at your home or business
- A fixed quote before you book
Read our prices page and guide to resurfacing and replacement costs.
When to call us in Welby
Once enamel loses its gloss, it stains more easily, and scrubbing it wears it down further. At that stage, resurfacing is the fix.
It’s worth getting a quote if you see:
- A period or roll-top bath worth keeping
- Thin, worn enamel in places
- A bath that stays dull however much you clean it
- Stains that will not shift
What to look for in a quote
- Is the price fixed, and does it include VAT?
- How the room is protected while they work
- What the guarantee covers, and for how long
- Whether there are any call-out or travel charges
Different materials, different repairs
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Towns and villages near Welby
What else we do in Welby
Welby: your questions answered
How long will the bath be out of use?
Generally a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
What information do you need?
Some pictures, your postcode and how to reach you. On the day, access to the room.
Can you resurface a pink bath in white?
Yes, most people go for white. Mention the colour you want when you send photos.
Is it OK to have pets in the house?
Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.
Does someone need to be in?
Someone needs to let us in and show us the job. You do not need to watch us work.
Can you do more than one item on the same visit?
Of course, and it usually saves money. Send pictures of everything together and you will get one combined price.
Is there a call-out fee?
We don’t add a call-out fee. Your fixed price includes everything.
Is there any odour?
A little, depending on the job. Ventilation keeps it to a minimum, and it soon fades.
What we do, step by step
The work is clean and fairly quiet. We protect the area first, then the work takes the best part of a day. Before we leave, we explain the curing time and the aftercare.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
Preparing for the visit
- Mention any parking restrictions or tricky access
- Clear toiletries, mats and anything else from around the area
- Let us know which floor the room is on
Getting a price
A quote takes minutes to ask for: photograph the damage, then the entire bath, add your postcode and send them over. You will get a fixed price, not an estimate.
Read more
For landlords and businesses
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
What affects the price in Welby
Prices start from £350. There is no area surcharge for Welby. What changes the price is:
- Access to the area
- How much damage there is
- The material
- Whether we combine several jobs
Set against the cost of replacement, repairing generally costs far less, because there’s no removal, plumbing or making good. The quote lists exactly what you are paying for.
How to get a fixed price
When you take your photos, these tips help us give you a firm price:
- One sharp close-up of the damage
- A photo taken from further back
- Good light, ideally daylight, without flash glare
- A coin or ruler next to the damage for scale
We price from pictures so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.
About our accreditations · Every repair comes with a one-year guarantee.
