Herefordshire · England
Bath re-enamelling & resurfacing in Wellington, Herefordshire
Bath re-enamelling in Wellington without the cost of replacing. Get a fixed quote from your photos, then book a visit.
- Resurfacing from £350
- A roll-top that is seen better days
- Worn patches where water runs and sits
Bath re-enamelling at your home in Wellington
After cleaning, repairing and priming, we spray on the new finish. Most of the work, and most of the durability, is in the preparation, so we do not cut corners on it. Typical jobs include lots of chips and rust spots and a coloured bath you want in white, in pressed steel baths, acrylic baths and basins & shower trays.
We guarantee the work for a year. If something isn’t right in that time, we come back and put it right.
- Location
- Wellington (HR4)
- County
- Herefordshire
- Guarantee
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
How to look after the repair
It’s all simple stuff:
- Clean with a soft cloth and mild detergent
- Leave the bath for the full curing time before using it
- Fix dripping taps quickly
- Wipe the bath dry after use in hard water areas
Rinse the bath and wipe it over after use, particularly where water is hard, so limescale cannot build up.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
Materials and what they mean for the repair
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel frequently rusts by the plughole, so we check it carefully.
About Wellington
Wellington is about 5 miles north of Hereford, in Herefordshire. Our repair technicians come to clients in Wellington and nearby villages, so you do not need to take anything anywhere. We cover 255 places in Herefordshire, from the larger towns to small villages. Our nearest city page is Birmingham, about 43 miles away.
Our visits in HR4 are booked in the same way as anywhere else. You will find streets such as Bridge Lane, Dernside Close and Brookside, all of which we cover. Other places close to Wellington include Auberrow (1 mile south), Moreton on Lugg (2 miles south-east), Canon Pyon (2 miles west), Portway (2 miles south) and Tillington Common (2 miles south-west). Larger places within reach include Hereford (5 miles south), Ledbury (15 miles south-east), Leominster (7 miles north), Redhill (6 miles south), Newton Farm (6 miles south) and Whitecross (5 miles south).
Near you in Wellington
Our clients here include homes close to Church of St Margaret, Old Boot pub and Wellington Primary School and the streets around them. Other landmarks nearby include Dinmore Preceptory (1.3 miles north) and St. Mary's Hospital (3.1 miles south). The countryside around Wellington includes Wyevale Wood and Dinmore Hill.
Nearby places to Wellington
More services for Wellington
Landlords, agents and businesses in Wellington
We regularly work with letting and managing agents. Just send pictures, the address and how to get access.
If you manage property in Wellington, we can repair and quote for several addresses together. Just send photos for each address and we will come back with a combined price.
How we price bath re-enamelling
Resurfacing from £350. We price every job individually. What matters most is:
- Where the damage is and how we get to it
- Previous DIY repairs that have to come out
- How many areas need work
- The material and finish
Set against the cost of replacement, repairing generally costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Quotes from your pictures
Two or three clear photos are generally enough. It helps if you send:
- Natural light rather than flash
- The postcode, so we can plan the visit
- A close-up of the damage, in focus
- A picture taken from further back
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath, we can price the job without visiting.
Can I fix it myself?
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.
If you’re set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.
What we do, step by step
You do not need to empty the room. We bring everything we need with us, put protection down and start once you are happy with the plan. Most jobs take most of the day, and you can get on with other things while we are there.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can normally be used the day after.
Getting ready for the visit
- Have somewhere for us to park nearby if possible
- Let the surface dry out before the visit
- Open a window if you can
Getting a price
The quickest way to a price is to send a couple of photos through our quote form or ring us. We’ll tell you honestly whether it can be repaired.
Read more
Repair or replace: which is better?
Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Prices start from £350. Our prices are the same across the UK, with no extra for Wellington. What changes the price is the job itself: how much damage, what it’s made of and how many items.
What you get with us
- Normally one visit, start to finish
- CHAS, Constructionline and SafeContractor accredited
- No need to remove anything
- We leave the room as we found it
See our full price list and bath cost comparison.
What we are called out for in Wellington
Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.
You may need us if you’ve spotted any of these:
- Wear marks under the taps
- Brown or grey marks that do not clean off
- Lots of chips and rust spots
- A bath in a colour that no longer suits
What to look for in a quote
- Whether cleaning and preparation are in the price
- How your room will be protected
- When it can be used again
- What aftercare is recommended
Wellington: your questions answered
Do you resurface freestanding baths?
Yes. We can do the inside and outside if you’d like.
Does the bath have to be removed?
No, it stays where it is. Everything is done in your bathroom, with the room protected and ventilated.
Can tenants book a repair?
We’re happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
How quickly can you book me in?
Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
How long will the bath be out of use?
Typically one day, with the bath ready the following day. A badly pitted bath can need a second day.
What does bath re-enamelling cost?
Resurfacing from £350. Because every job differs, we price from photos. You know the full cost before anything is booked.
Is there a call-out fee?
We don’t add a call-out fee. Your fixed quote includes everything.
About our accreditations · Every repair comes with a one-year guarantee.
