Oxfordshire · England
Bath Re-enamelling for Wendlebury homes
Fixed-price bath re-enamelling in Wendlebury and the surrounding area, done in a single visit in most cases.
- Resurfacing from £350
- A peeling or bubbling previous coating
- A coloured bath you want in white
Landlord and trade work in Wendlebury
We work for landlords, letting agents and housing providers in Wendlebury as well as homeowners. Repairing between tenancies keeps void periods short, and it typically costs far less than a refit.
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
About our bath re-enamelling in Wendlebury
Many of the baths we re-enamel are period roll-tops, which would be difficult and expensive to replace. Resurfacing them in place keeps the original bath. If you are dealing with enamel that’s lost its shine and feels rough and several chips and rust patches, we can help.
Every repair comes with our one-year guarantee.
- Where
- Wendlebury (OX25)
- Area hub
- Oxfordshire
- Warranty
- 12 months on all our work
- Price
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Also near Wendlebury
Also in Wendlebury
Wendlebury and nearby
Wendlebury is about 2 miles south-west of Bicester, in Oxfordshire. We travel to clients in Wendlebury, so there’s no workshop to go to. Wendlebury is one of 443 places in Oxfordshire where we work. We work right across the region, from Wendlebury to Birmingham (51 miles away).
Our repair technicians cover all of the OX25 postcode area. From Church Lane, St Giles Close and Rectory Close or a nearby road, we can come to you. Other places close to Wendlebury include Chesterton (1 mile north), Merton (2 miles south-east), Fencott (2 miles south-east), Charlton-on-Otmoor (2 miles south) and Ambrosden (3 miles east). Within a short drive, we also cover Oxford (9 miles south), Banbury (15 miles north-west), Abingdon-on-Thames (14 miles south), Witney (14 miles south-west), Thame (13 miles south-east) and Kidlington (6 miles south-west).
Near you in Wendlebury
In Wendlebury, that means homes near Church of St Giles, The Red Lion Public House and Bicester Technology Studio. For rail, the closest station is Bicester Village station, about 2.1 miles north-east. Nearby you’ll also find Bicester Community Hospital (2 miles north-east) and Ardley Castle (4.9 miles north). Green spaces nearby include Woodsides Meadow and Graven Hill.
Wendlebury questions
How long does re-enamelling last?
Care for it and it lasts. Gentle cleaning, no suction mats.
Can you repair several things at once?
Yes, and it’s often cheaper. Send pictures of everything together and we will quote them together.
Will it make a mess?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
Can you do the outside of a roll-top?
Yes, often. We resurface the inside, and the outside can be refinished too.
What happens once I’ve sent photos?
You will get a fixed quote back. You’re under no obligation.
I rent my home. Can I book you?
We’re happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Is it OK to have pets in the house?
Keep pets and children away from the work area on the day, so the repair is not disturbed while it cures.
How we price bath re-enamelling
Prices start from £350. We charge the same across the UK, including Wendlebury. What changes the price is:
- Whether we combine several jobs
- Whether it’s a chip, crack, burn or wear
- The colour and finish to match
- The size and number of damaged areas
No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
Send pictures for a quote
Two or three clear pictures are normally enough. Try to include:
- Any earlier repairs or coatings
- One sharp close-up of the damage
- The material, if you know it
- A picture taken from further back
The quickest way to a price is to send a couple of pictures through our quote form or ring us. We’ll tell you honestly if a repair is the right fix.
Repairs by material
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s the part we put right.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
When to call us in Wendlebury
Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. We strip what’s failing and start again.
The most common problems we are called about are:
- A bath that stays dull however much you clean it
- Brown or grey marks that do not clean off
- An original cast iron bath that needs restoring
- Several chips and rust patches
Before booking anyone
- What protection goes down before work starts
- What prep work is covered
- What the guarantee covers, and for how long
- Who will actually do the work
Looking after it afterwards
How the surface is treated afterwards matters:
- Do not use the bath until it has fully cured
- Use washing-up liquid and a soft cloth
- Get any chip repaired quickly
- A dripping tap should be fixed promptly
Wipe the bath dry after use where you can, particularly with hard water, and rinse off any bath products.
Leave a peeling coating alone. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
How the visit works
There is not much you need to do on the day. Show us the job, point us to the room, and we’ll get on with it. Most visits take most of the day, including clearing up.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can normally be used the following day.
How to prepare
- Plan for the room to be out of bounds to pets and children
- Let us know if it has been repaired before
- Tell us about parking, stairs or access
How to get a price
Pricing is simple: take a close-up of the damage and a photo from further back, send them to us with your postcode, and you’ll get a fixed quote back. There is no charge for the quote and you’re under no obligation.
Advice
Should I try a DIY kit first?
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.
Honest limits
Some problems need a builder, plumber or fitter rather than us:
- Acrylic that moves when you stand in it
- Holes rusted through the metal
- A cast iron or steel bath that is cracked right through
Not sure? Send photos and we will give you a straight answer before booking.
Surfaces we repair
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
About our accreditations · Every repair comes with a one-year guarantee.
