Oxfordshire · England
Bath re-enamelling & resurfacing in Merton, Oxfordshire
Bath re-enamelling in Merton without the cost of replacing. Send us photos for a fixed price, then book a visit.
- Resurfacing from £350
- Staining under the taps and around the waste
- Worn patches where water runs and sits
Bath re-enamelling in Merton without replacing anything
After cleaning, repairing and priming, we spray on the new finish. The preparation is what makes it last, and we take our time over it. If you’re dealing with stains that won’t shift and a bath in a colour that no longer suits, we can help, whatever the material.
We stand behind the work with a one-year guarantee.
- Where
- Merton (OX25)
- Area hub
- Oxfordshire
- Warranty
- 12 months on all our work
- Quotes
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Where we work around Merton
Merton is about 3 miles south of Bicester, in Oxfordshire. Our repair technicians come to homes and businesses in Merton and the surrounding area, so you do not need to take anything anywhere. We cover all 443 towns and villages in Oxfordshire, from the larger towns to small villages. Our jobs stretch from Merton to London (52 miles away).
Here we cover the OX25 postcode area. Neighbouring places we cover include Fencott (1 mile south), Murcott (1 mile south-east), Charlton-on-Otmoor (1 mile south-west), Wendlebury (2 miles north-west) and Lower Arncott (2 miles east). Further out, we also cover Oxford (8 miles south), Bicester (3 miles north), Abingdon-on-Thames (13 miles south), Witney (15 miles west), Thame (11 miles south-east) and Kidlington (6 miles south-west).
Near you in Merton
Locally, our jobs take us to homes close to Church of St Swithin and The Old Plough pub. Merton’s nearest station is Bicester Village station, about 2.7 miles north of the centre. Other landmarks nearby include Bicester Community Hospital (2.9 miles north) and Bicester Avenue (2.3 miles north). The countryside around Merton includes Graven Hill and Woodsides Meadow.
Merton: your questions answered
Is it messy?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
What if the damage is worse than the pictures show?
We will show you and explain before doing anything extra. Nothing extra is done without your say-so.
How quickly can you book me in?
We’ll give you dates with your quote. If it’s urgent, say so and we will do what we can.
How long does re-enamelling last?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
I rent my home. Can I book you?
Yes, but check with your landlord or agent first. Landlords are frequently glad to have it sorted.
What information do you need?
Just pictures, your postcode and a contact number. On the day, we only need access to the room.
What happens next?
You get a fixed price and available dates. If we need another angle, we will ask.
Is a repair better than a new one?
Generally, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we’ll say so.
What we do, step by step
Your technician turns up at the time we agreed with you, introduces themselves and checks the damage against your pictures first. The floor and nearby surfaces are covered before we open a single tin. The work itself takes a full day, and the room is left clean and tidy.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the following day.
Before we arrive
- Move bottles, mats and clutter away from the area
- Mention any earlier repairs or resurfacing
- Let us know about parking or access
How to get a price
Getting a price is easy: take a close-up of the damage and a picture from further back, send them to us with your postcode, and we’ll reply with a fixed quote. There is no charge for the quote and you are under no obligation.
Read more
When we’d advise against a repair
A repair isn’t always the answer, and we’d rather say so up front. Repairs won’t solve:
- Steel that has corroded right through
- Acrylic that moves when you stand in it
- Leaking taps or wastes (a plumber’s job)
If in doubt, send pictures and we will say what we think.
Materials we work on in Merton
- Basins & shower trays
- Acrylic baths
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
Why repair rather than replace?
When the bathroom is fine apart from the bath’s finish, re-enamelling is the least disruptive fix. Tiles, panels and taps stay put. Resurfacing from £350, with every job priced individually. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
Why choose Surface Doctor in Merton
- Work done at your home or business
- One-year guarantee on every repair
- Colour mixed on the day to match
- Same prices wherever you are
Read our prices page or bath cost comparison.
Aftercare tips
After the repair has cured, a few habits help it last:
- Avoid suction-cup mats
- Get any chip repaired quickly
- Do not leave bottles, razors or sponges standing on the surface
- Respect the curing time we give you
Rinse the bath and wipe it over after use, particularly where water is hard, to stop limescale building up.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Resurfacing sooner means less repair work first.
Work for landlords and builders
For anyone letting property in or around Merton, we will quote for several properties at once. Send pictures for each one and we’ll come back with a combined price.
Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.
More services for Merton
Different materials, different repairs
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is the part we put right.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
DIY kit or professional repair?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is generally cheaper.
How we price bath re-enamelling
Prices start from £350. We price every job individually, from your photos. The main factors are:
- Whether old repairs or coatings need taking off
- What the surface is made of
- How much damage there is
- Where the damage is and how we get to it
Every job is a little different, so we price each one individually. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
Send photos for a quote
When you take your pictures, a few simple things make all the difference:
- A photo taken from further back
- Details of any past repairs
- The material, if you know it
- A coin beside the damage so we can judge size
There’s no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
About our accreditations · Every repair comes with a one-year guarantee.
