Carmarthenshire · Wales
Bath Re-enamelling for Wernolau homes
Bath re-enamelling in and around Wernolau: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- Wear marks under the taps
- An original cast iron bath that needs restoring
Bath re-enamelling in Wernolau, done in place
Resurfacing renews the whole surface of the bath without a refit. It suits baths that are dull, stained, rough or chipped all over. We’re often asked to fix a bath in a colour that no longer suits and lots of chips and rust spots, in acrylic baths, Victorian roll-tops and pressed steel baths.
A one-year guarantee comes as standard, so you are covered after the visit.
- Location
- Wernolau (SA18)
- Area hub
- Carmarthenshire
- Cover
- A year, on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
For landlords and businesses
Builders use us to fix snagging damage before handover. We can visit several plots in one trip.
Landlords, letting agents and housing providers in Wernolau use us as well as homeowners. Repairing between tenancies keeps void periods short, and it usually costs far less than a refit.
What we cannot put right
In fairness, there are a few things a repair won’t fix:
- Leaks from fittings rather than the bath
- A bath split right through the body
- Steel that has corroded right through
Send us photos and we will tell you honestly.
Materials we repair
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
Also near Wernolau
What else we do in Wernolau
Repairing versus replacing in Wernolau
Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Resurfacing from £350, with every job priced individually. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.
Why us?
- Honest advice, even when it means no job
- CHAS, Constructionline and SafeContractor accredited
- Free fixed quotes from pictures
- Colours mixed by hand to suit your surface
Read our prices page or guide to resurfacing and replacement costs.
FAQs for Wernolau
What happens next?
You get a fixed quote and available dates. If we need another angle, we’ll ask.
Do you charge for travel?
We do not add a call-out fee. Your fixed quote includes everything.
What if the damage is worse than the pictures show?
Your quote covers the damage in the photos. If there is more, we’ll tell you before starting.
Can you quote from pictures?
In nearly every case. If pictures don’t show enough, we will ask for another angle.
Will the bath be moved?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
How long will the bath be out of use?
Generally one day, with the bath ready the next day. Deeply pitted baths may need a second day.
Is repairing better than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.
Do you work in Wernolau?
Yes, we do. Technicians travel to Wernolau from across the region, and the price is the same as everywhere else.
Prices and what affects them
Resurfacing from £350. We price every job individually. What matters most is:
- What the surface is made of
- The colour and finish to match
- What kind of damage it is
- How easy the damage is to reach
No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
Getting a price from pictures
You can take the photos on your phone, there’s no need for anything special. Ensure they show:
- Where you are, by postcode
- A clear, close picture of the problem area
- The material, if you know it
- Natural light rather than flash
There’s no need for us to visit first. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Looking after it afterwards
A little care keeps the finish looking good. Our advice:
- Repair dripping taps early
- A quick wipe after use keeps limescale away
- Avoid suction-cup mats
- Do not leave bottles, razors or sponges standing on the surface
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface and makes resurfacing more work.
When to call us in Wernolau
Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
Contact us if you’ve noticed:
- A coloured bath you want in white
- Chips and rust in more than one place
- A dull, rough surface that will not come clean
- Brown or grey marks that do not clean off
Questions to ask before you book
- Aftercare advice
- Whether cleaning and preparation are in the price
- What happens if they find more damage
- Whether a trained technician does the job
Covering Wernolau
Wernolau is about 1 mile east of Ammanford, in Carmarthenshire. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We cover 195 places across Carmarthenshire.
Here we cover the SA18 postcode area. Streets in the area include Wernoleu Road, Wern-Ddu Road and Maesquarre Road, and we cover them all. Wernolau is on the A474, which makes it straightforward to reach. If you are just outside Wernolau, we cover Pontamman (1 mile south), Hopkinstown (1 mile east), Betws (1 mile south-west), Ammanford (1 mile west) and Tir-y-dail (1 mile west). Larger places within reach include Llanelli (11 miles south-west), Carmarthen (15 miles west), Llanelli Rural (12 miles south-west), Bigyn (11 miles south-west), Wern (12 miles south-west) and Box (11 miles south-west).
Near you in Wernolau
Typical jobs here are in homes near Gwynfryn College, All Saints Church and Ammanford Hotel. For rail, the closest station is Ammanford station, about 1.3 miles west. A little further out are Amman Valley Hospital (2.1 miles north-east) and Bro Aman Museum (1 mile west). Open spaces near Wernolau include Mynydd y Gwair and Llyn Llech Owain.
How the visit works
The work is clean and fairly quiet, so you can stay at home while we’re there. We protect the area first, then the work takes the best part of a day. At the end we talk you through the curing time and the aftercare.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- Once cured, normally by the next day, the bath is ready.
How to prepare
- Tell us if there are stairs or a lift
- Keep children and pets away from the room on the day
- Mention any parking restrictions or tricky access
Ask for a price
If you’re in Wernolau and want a price, pictures are the quickest way: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.
Advice
Should I try a DIY kit first?
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
If you do try a kit, read the instructions carefully, and give it the full curing time. If it fails, we can still put it right.
About our accreditations · Every repair comes with a one-year guarantee.
